From:   Pavel Skripkin <paskripkin@gmail.com>
To:     stefan@datenfreihafen.org, alex.aring@gmail.com,
        davem@davemloft.net, kuba@kernel.org
Cc:     linux-wpan@vger.kernel.org, netdev@vger.kernel.org,
        linux-kernel@vger.kernel.org,
        Pavel Skripkin <paskripkin@gmail.com>, stable@vger.kernel.org,
        Alexander Potapenko <glider@google.com>
Subject: [PATCH RFT] ieee802154: atusb: move to new USB API
Date:   Sun,  2 Jan 2022 20:19:43 +0300
Message-Id: <20220102171943.28846-1-paskripkin@gmail.com>
In-Reply-To: <CAG_fn=VDEoQx5c7XzWX1yaYBd5y5FrG1aagrkv+SZ03c8TfQYQ@mail.gmail.com>
References: <CAG_fn=VDEoQx5c7XzWX1yaYBd5y5FrG1aagrkv+SZ03c8TfQYQ@mail.gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().

Since there is an API, that cannot read less bytes, than was requested,
let's move atusb driver to use it. It will fix all potintial bugs with
uninit values and make code more modern

Fail log:

BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
 ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
 atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
 atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396

Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver")
Cc: stable@vger.kernel.org # 5.9
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
---
 drivers/net/ieee802154/atusb.c | 61 +++++++++++++++++++++-------------
 1 file changed, 38 insertions(+), 23 deletions(-)

diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
index 23ee0b14cbfa..43befea0110f 100644
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -80,10 +80,9 @@ struct atusb_chip_data {
  * in atusb->err and reject all subsequent requests until the error is cleared.
  */
 
-static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
-			     __u8 request, __u8 requesttype,
-			     __u16 value, __u16 index,
-			     void *data, __u16 size, int timeout)
+static int atusb_control_msg_recv(struct atusb *atusb, __u8 request, __u8 requesttype,
+				  __u16 value, __u16 index,
+				  void *data, __u16 size, int timeout)
 {
 	struct usb_device *usb_dev = atusb->usb_dev;
 	int ret;
@@ -91,8 +90,30 @@ static int atusb_control_msg(struct atusb *atusb, unsigned int pipe,
 	if (atusb->err)
 		return atusb->err;
 
-	ret = usb_control_msg(usb_dev, pipe, request, requesttype,
-			      value, index, data, size, timeout);
+	ret = usb_control_msg_recv(usb_dev, 0, request, requesttype,
+				   value, index, data, size, timeout, GFP_KERNEL);
+	if (ret < 0) {
+		atusb->err = ret;
+		dev_err(&usb_dev->dev,
+			"%s: req 0x%02x val 0x%x idx 0x%x, error %d\n",
+			__func__, request, value, index, ret);
+	}
+
+	return ret;
+}
+
+static int atusb_control_msg_send(struct atusb *atusb, __u8 request, __u8 requesttype,
+				  __u16 value, __u16 index,
+				  void *data, __u16 size, int timeout)
+{
+	struct usb_device *usb_dev = atusb->usb_dev;
+	int ret;
+
+	if (atusb->err)
+		return atusb->err;
+
+	ret = usb_control_msg_send(usb_dev, 0, request, requesttype,
+				   value, index, data, size, timeout, GFP_KERNEL);
 	if (ret < 0) {
 		atusb->err = ret;
 		dev_err(&usb_dev->dev,
@@ -107,8 +128,7 @@ static int atusb_command(struct atusb *atusb, u8 cmd, u8 arg)
 	struct usb_device *usb_dev = atusb->usb_dev;
 
 	dev_dbg(&usb_dev->dev, "%s: cmd = 0x%x\n", __func__, cmd);
-	return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
-				 cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
+	return atusb_control_msg_send(atusb, cmd, ATUSB_REQ_TO_DEV, arg, 0, NULL, 0, 1000);
 }
 
 static int atusb_write_reg(struct atusb *atusb, u8 reg, u8 value)
@@ -116,9 +136,8 @@ static int atusb_write_reg(struct atusb *atusb, u8 reg, u8 value)
 	struct usb_device *usb_dev = atusb->usb_dev;
 
 	dev_dbg(&usb_dev->dev, "%s: 0x%02x <- 0x%02x\n", __func__, reg, value);
-	return atusb_control_msg(atusb, usb_sndctrlpipe(usb_dev, 0),
-				 ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
-				 value, reg, NULL, 0, 1000);
+	return atusb_control_msg_send(atusb, ATUSB_REG_WRITE, ATUSB_REQ_TO_DEV,
+				      value, reg, NULL, 0, 1000);
 }
 
 static int atusb_read_reg(struct atusb *atusb, u8 reg)
@@ -133,9 +152,8 @@ static int atusb_read_reg(struct atusb *atusb, u8 reg)
 		return -ENOMEM;
 
 	dev_dbg(&usb_dev->dev, "%s: reg = 0x%x\n", __func__, reg);
-	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
-				ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
-				0, reg, buffer, 1, 1000);
+	ret = atusb_control_msg_recv(atusb, ATUSB_REG_READ, ATUSB_REQ_FROM_DEV,
+				     0, reg, buffer, 1, 1000);
 
 	if (ret >= 0) {
 		value = buffer[0];
@@ -805,9 +823,8 @@ static int atusb_get_and_show_revision(struct atusb *atusb)
 		return -ENOMEM;
 
 	/* Get a couple of the ATMega Firmware values */
-	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
-				ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
-				buffer, 3, 1000);
+	ret = atusb_control_msg_recv(atusb, ATUSB_ID, ATUSB_REQ_FROM_DEV, 0, 0,
+				     buffer, 3, 1000);
 	if (ret >= 0) {
 		atusb->fw_ver_maj = buffer[0];
 		atusb->fw_ver_min = buffer[1];
@@ -861,9 +878,8 @@ static int atusb_get_and_show_build(struct atusb *atusb)
 	if (!build)
 		return -ENOMEM;
 
-	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
-				ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
-				build, ATUSB_BUILD_SIZE, 1000);
+	ret = atusb_control_msg_recv(atusb, ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0,
+				     build, ATUSB_BUILD_SIZE, 1000);
 	if (ret >= 0) {
 		build[ret] = 0;
 		dev_info(&usb_dev->dev, "Firmware: build %s\n", build);
@@ -985,9 +1001,8 @@ static int atusb_set_extended_addr(struct atusb *atusb)
 		return -ENOMEM;
 
 	/* Firmware is new enough so we fetch the address from EEPROM */
-	ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0),
-				ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
-				buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000);
+	ret = atusb_control_msg_recv(atusb, ATUSB_EUI64_READ, ATUSB_REQ_FROM_DEV, 0, 0,
+				     buffer, IEEE802154_EXTENDED_ADDR_LEN, 1000);
 	if (ret < 0) {
 		dev_err(&usb_dev->dev, "failed to fetch extended address, random address set\n");
 		ieee802154_random_extended_addr(&atusb->hw->phy->perm_extended_addr);
-- 
2.34.1