Date:   Sun, 2 Jan 2022 18:38:51 +0100
From:   Corentin Labbe <clabbe.montjoie@gmail.com>
To:     Conley Lee <conleylee@foxmail.com>
Cc:     davem@davemloft.net, kuba@kernel.org, mripard@kernel.org,
        wens@csie.org, netdev@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-sunxi@lists.linux.dev, jernej.skrabec@gmail.com
Subject: Re: [PATCH v6] sun4i-emac.c: add dma support
Message-ID: <YdHjK+/SzaeI/V2Q@Red>
References: <20211228164817.1297c1c9@kicinski-fedora-PC1C0HJN.hsd1.ca.comcast.net>
 <tencent_DE05ADA53D5B084D4605BE6CB11E49EF7408@qq.com>
 <Yc7e6V9/oioEpx8c@Red>
 <tencent_57960DDC83F43DA3E0A2F47DEBAD69A4A005@qq.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <tencent_57960DDC83F43DA3E0A2F47DEBAD69A4A005@qq.com>
Precedence: bulk

Le Sat, Jan 01, 2022 at 03:09:01PM +0800, Conley Lee a écrit :
> On 12/31/21 at 11:43上午, Corentin Labbe wrote:
> > Date: Fri, 31 Dec 2021 11:43:53 +0100
> > From: Corentin Labbe <clabbe.montjoie@gmail.com>
> > To: conleylee@foxmail.com
> > Cc: davem@davemloft.net, kuba@kernel.org, mripard@kernel.org,
> >  wens@csie.org, netdev@vger.kernel.org,
> >  linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
> > Subject: Re: [PATCH v6] sun4i-emac.c: add dma support
> > 
> > Le Wed, Dec 29, 2021 at 09:43:51AM +0800, conleylee@foxmail.com a écrit :
> > > From: Conley Lee <conleylee@foxmail.com>
> > > 
> > > Thanks for your review. Here is the new version for this patch.
> > > 
> > > This patch adds support for the emac rx dma present on sun4i. The emac
> > > is able to move packets from rx fifo to RAM by using dma.
> > > 
> > > Change since v4.
> > >   - rename sbk field to skb
> > >   - rename alloc_emac_dma_req to emac_alloc_dma_req
> > >   - using kzalloc(..., GPF_ATOMIC) in interrupt context to avoid
> > >     sleeping
> > >   - retry by using emac_inblk_32bit when emac_dma_inblk_32bit fails
> > >   - fix some code style issues 
> > > 
> > > Change since v5.
> > >   - fix some code style issue
> > > 
> > 
> > Hello
> > 
> > I just tested this on a sun4i-a10-olinuxino-lime
> > 
> > I got:
> > [    2.922812] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): get io resource from device: 0x1c0b000, size = 4096
> > [    2.934512] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): failed to request dma channel. dma is disabled
> > [    2.945740] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): configure dma failed. disable dma.
> > [    2.957887] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 19 MAC: 02:49:09:40:ab:3d
> > 
> > On which board did you test it and how ?
> > 
> > Regards
> 
> Sorry. I sent the email with text/html format. This email is an clean version.
> 
> In order to enable dma rx channel. `dmas` and `dma-names` properties
> should be added to emac section in dts:
> 
> emac: ethernet@1c0b000 {
> 	...
> 	dmas = <&dma SUN4I_DMA_DEDICATED 7>;
> 	dma-names = "rx";
> 	...
> }

Helo

Yes I figured that out. But you should have done a patch serie adding this.
Your patch is now applied but it is a useless change without the dtb change.
You should also probably update the driver binding (Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml) since you add new members to DT node.

Furthermore, why did you add RX only and not TX dma also ?

Probably it is too late since patch is applied but it is:
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-on: sun4i-a10-olinuxino-lime

Regards