Date:   Tue, 4 Jan 2022 12:33:15 +0100
From:   Corentin Labbe <clabbe.montjoie@gmail.com>
To:     "Russell King (Oracle)" <linux@armlinux.org.uk>
Cc:     linus.walleij@linaro.org, ulli.kroll@googlemail.com,
        kuba@kernel.org, davem@davemloft.net, andrew@lunn.ch,
        hkallweit1@gmail.com, linux-arm-kernel@lists.infradead.org,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: net: phy: marvell: network working with generic PHY and not with
 marvell PHY
Message-ID: <YdQwexJVfrdzEfZK@Red>
References: <YdQoOSXS98+Af1wO@Red>
 <YdQsJnfqjaFrtC0m@shell.armlinux.org.uk>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <YdQsJnfqjaFrtC0m@shell.armlinux.org.uk>
Precedence: bulk

Le Tue, Jan 04, 2022 at 11:14:46AM +0000, Russell King (Oracle) a ?crit :
> On Tue, Jan 04, 2022 at 11:58:01AM +0100, Corentin Labbe wrote:
> > Hello
> > 
> > I have a gemini SSI 1328 box which has a cortina ethernet MAC with a Marvell 88E1118 as given by:
> > Marvell 88E1118 gpio-0:01: attached PHY driver (mii_bus:phy_addr=gpio-0:01, irq=POLL)
> > So booting with CONFIG_MARVELL_PHY=y lead to a non-working network with link set at 1Gbit
> > Setting 'max-speed = <100>;' (as current state in mainline dtb) lead to a working network.
> > By not working, I mean kernel started with ip=dhcp cannot get an IP.
> 
> How is the PHY connected to the host (which interface mode?) If it's
> RGMII, it could be that the wrong RGMII interface mode is specified in
> DT.
> 

The PHY is set as RGMII in DT (arch/arm/boot/dts/gemini-ssi1328.dts)
The only change to the mainline dtb is removing the max-speed.

Regards