Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 22 Nov 2001 09:32:39 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 22 Nov 2001 09:32:30 -0500 Received: from holly.csn.ul.ie ([136.201.105.4]:28690 "HELO holly.csn.ul.ie") by vger.kernel.org with SMTP id ; Thu, 22 Nov 2001 09:32:22 -0500 Date: Thu, 22 Nov 2001 14:32:16 +0000 (GMT) From: Dave Airlie X-X-Sender: To: Kai Germaschewski Cc: Subject: Re: PCMCIA and APM/ACPI issue (xircom card problem) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org > > work.. > > So basically, the problem exists when CONFIG_ACPI=y, right? Can you try to > boot the ACPI enabled kernel with acpi=off in the command line? okay one kernel with ACPI it doesn't work with ACPI off it does ... 2.4.15-pre8 > Which exact error do you get from lspci? Does it give the error on both > kernels? lspci without ACPI dumps out: pcilib: Cannot open /proc/bus/pci/02/00.1 lspci: Unable to read 64 bytes of configuration space. same except 00.1 is 00.7 on the ACPI boot.. I've attached a bootup with ACPI debug switched on there seems to be some issues but I've no idea what they mean.. Regards, Dave. -- David Airlie, Software Engineer http://www.skynet.ie/~airlied / airlied@skynet.ie pam_smb / Linux DecStation / Linux VAX / ILUG person Linux version 2.4.15-pre8-acpi (root@radon) (gcc version 2.95.2 19991024 (release)) #5 Thu Nov 22 14:17:05 GMT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved) BIOS-e820: 0000000000100000 - 0000000007fec000 (usable) BIOS-e820: 0000000007fec000 - 0000000007ff0000 (reserved) BIOS-e820: 00000000100a0000 - 0000000010100000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) On node 0 totalpages: 32748 zone(0): 4096 pages. zone(1): 28652 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Could not enable APIC! Kernel command line: BOOT_IMAGE=acpi ro root=306 vga=0x0301 noinitrd Initializing CPU#0 Detected 430.142 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 858.52 BogoMIPS Memory: 127064k/130992k available (841k kernel code, 3540k reserved, 236k data, 200k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000 CPU: Common caps: 0183f9ff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 0a Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfc0be, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd devfs: v0.120 (20011103) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 tbxface-0099 [01] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:........................................................................................................................................................ 152 Control Methods found and parsed (354 nodes total) ACPI Namespace successfully loaded at root c0252b20 ACPI: Core Subsystem version [20011018] evxfevnt-0081 [02] Acpi_enable : Transition to ACPI mode successful Executing device _INI methods:.........Ps_execute: method failed - \_SB_.PCI0._INI (c7fa9f08) nsinit-0351 [04] Ns_init_one_device : \ /_SB_PCI0._INI failed: AE_AML_NOT_OWNER ..............Ps_execute: method failed - \_SB_.PCI0.PX40.FDC0._STA (c7fa6408) uteval-0337 [05] Ut_execute_STA : _STA on FDC0 failed AE_AML_NOT_OWNER ...Ps_execute: method failed - \_SB_.PCI0.PX40.UAR1._STA (c7fa5648) uteval-0337 [05] Ut_execute_STA : _STA on UAR1 failed AE_AML_NOT_OWNER .Ps_execute: method failed - \_SB_.PCI0.PX40.IRDA._STA (c7fa5ac8) uteval-0337 [05] Ut_execute_STA : _STA on IRDA failed AE_AML_NOT_OWNER .Ps_execute: method failed - \_SB_.PCI0.PX40.ECP_._STA (c7fa5ec8) uteval-0337 [05] Ut_execute_STA : _STA on ECP_ failed AE_AML_NOT_OWNER ....................... 51 Devices found: 47 _STA, 2 _INI Completing Region and Field initialization:.. 0/2 Regions, 2/10 Fields initialized (354 nodes total) ACPI: Subsystem enabled pty: 256 Unix98 ptys configured block: 128 slots per queue, batch=32 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHH2064AT, ATA DISK drive hdc: TORiSAN DVD-ROM DRD-U624, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 12685680 sectors (6495 MB) w/512KiB Cache, CHS=789/255/63, UDMA(33) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p3 < p5 p6 > NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 200k freed Adding Swap: 136512k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.268 $ time 14:24:38 Nov 22 2001 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 11 for device 00:07.2 PCI: Sharing IRQ 11 with 00:03.0 PCI: Sharing IRQ 11 with 00:03.1 usb-uhci.c: USB UHCI at I/O 0xdce0, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: kmalloc IF c7cb9480, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI Root Hub SerialNumber: dce0 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface c7cb9480 usb-uhci.c: v1.268:USB Universal Host Controller Interface driver Linux PCMCIA Card Services 3.1.29 kernel build: 2.4.15-pre8-acpi #5 Thu Nov 22 14:17:05 GMT 2001 options: [pci] [cardbus] [apm] Intel ISA/PCI/CardBus PCIC probe: PCI: Found IRQ 11 for device 00:03.0 PCI: Sharing IRQ 11 with 00:03.1 PCI: Sharing IRQ 11 with 00:07.2 PCI: Found IRQ 11 for device 00:03.1 PCI: Sharing IRQ 11 with 00:03.0 PCI: Sharing IRQ 11 with 00:07.2 TI 1225 rev 01 PCI-to-CardBus at slot 00:03, mem 0x10000000 host opts [0]: [ring] [serial pci & irq] [pci irq 11] [lat 32/32] [bus 4/4] host opts [1]: [ring] [serial pci & irq] [pci irq 11] [lat 32/32] [bus 5/5] ISA irqs (scanned) = 3,4,7,10 PCI status changes cs: cb_alloc(bus 4): vendor 0xffff, device 0xffff apm: BIOS version 1.2 Flags 0x03 (Driver version 1.15) apm: overridden by ACPI. PCI: Found IRQ 5 for device 00:08.0 maestro: Configuring ESS Maestro 2E found at IO 0xD800 IRQ 5 maestro: subvendor id: 0x00ab1028 maestro: PCI power management capability: 0x7622 maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf maestro: 1 channels configured. maestro: version 0.15 time 14:24:22 Nov 22 2001 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/