From:   Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To:     linux-kernel@vger.kernel.org
Cc:     Watson Chow <watson.chow@avnet.com>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: [PATCH v2 0/2] regulator: Add driver for Maxim MAX20086-MAX20089
Date:   Fri,  7 Jan 2022 00:43:48 +0200
Message-Id: <20220106224350.16957-1-laurent.pinchart+renesas@ideasonboard.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Hello,

This small series adds a new driver (along with DT bindings) for the
Maxim MAX20086-MAX20089 camera power protectors.

Compared to v1, this version takes all review comments into account
(assuming I've understood them correctly :-)).

The code originates from initial work done by Avnet, which I have
reworked extensively. Watson, I've kept your authorship on patch 2/2.
Would you like to be listed as a maintainer for the driver and the DT
bindings ?

Laurent Pinchart (1):
  dt-bindings: regulators: Add bindings for Maxim MAX20086-MAX20089

Watson Chow (1):
  regulator: Add MAX20086-MAX20089 driver

 .../bindings/regulator/maxim,max20086.yaml    | 106 ++++++
 MAINTAINERS                                   |   7 +
 drivers/regulator/Kconfig                     |  10 +-
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/max20086-regulator.c        | 332 ++++++++++++++++++
 5 files changed, 455 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max20086.yaml
 create mode 100644 drivers/regulator/max20086-regulator.c

-- 
Regards,

Laurent Pinchart