MIME-Version: 1.0
References: <20220107150512.614423-1-narmstrong@baylibre.com> <20220107150512.614423-3-narmstrong@baylibre.com>
In-Reply-To: <20220107150512.614423-3-narmstrong@baylibre.com>
From:   Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date:   Fri, 7 Jan 2022 23:09:13 +0100
Message-ID: <CAFBinCC9J_w9JM-TmrXp7SXT27V7Ze37wrxHZZQ1==N4y2-0dg@mail.gmail.com>
Subject: Re: [PATCH v3 2/2] phy: amlogic: Add G12A Analog MIPI D-PHY driver
To:     Neil Armstrong <narmstrong@baylibre.com>
Cc:     kishon@ti.com, vkoul@kernel.org, linux-phy@lists.infradead.org,
        linux-amlogic@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Hi Neil,

On Fri, Jan 7, 2022 at 4:06 PM Neil Armstrong <narmstrong@baylibre.com> wrote:
[...]
> +#define HHI_MIPI_CNTL2 0x08
> +#define                HHI_MIPI_CNTL2_DIF_TX_CTL1      GENMASK(31, 16)
> +#define                HHI_MIPI_CNTL2_CH_EN            GENMASK(15, 11)
> +#define                HHI_MIPI_CNTL2_DIF_TX_CTL0      GENMASK(10, 0)
> +
> +#define DSI_LANE_0                             BIT(4)
> +#define DSI_LANE_1                             BIT(3)
> +#define DSI_LANE_CLK                           BIT(2)
> +#define DSI_LANE_2                             BIT(1)
> +#define DSI_LANE_3                             BIT(0)
At first I thought that these should be named
HHI_MIPI_CNTL2_DSI_LANE_0 (and similar).
But then I understood that they aren't bits directly in HHI_MIPI_CNTL2
but they belong to HHI_MIPI_CNTL2_CH_EN.
Have you considered naming them for example
HHI_MIPI_CNTL2_CH_EN_DSI_LANE_0 to make this more clear?

[...]
> +       if (IS_ERR(map)) {
> +               dev_err(dev,
> +                       "failed to get HHI regmap\n");
> +               return PTR_ERR(map);
I suggest using:
  return dev_err_probe(dev, PTR_ERR(map), "failed to get HHI regmap\n");
to simplify the code

[...]
> +       if (IS_ERR(priv->phy)) {
> +               ret = PTR_ERR(priv->phy);
> +               if (ret != -EPROBE_DEFER)
> +                       dev_err(dev, "failed to create PHY\n");
> +               return ret;
and similar here:
  return dev_err_probe(dev, PTR_ERR(priv->phy), "failed to create PHY\n");

[...]
> +static const struct of_device_id phy_g12a_mipi_dphy_analog_of_match[] = {
> +       {
> +               .compatible = "amlogic,g12a-mipi-dphy-analog",
> +       },
> +       { },
In the past I was suggested to use:
  { /* sentinel */ }
meaning: no trailing comma here so nobody can add entries after the
sentinel by accident.
I suggest doing the same here if you re-spin this series.


Thank you!
Martin