From:   Rob Herring <robh@kernel.org>
To:     Hari Nagalla <hnagalla@ti.com>
Cc:     linux-kernel@vger.kernel.org, linux-remoteproc@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, bjorn.andersson@linaro.org,
        mathieu.poirier@linaro.org, robh+dt@kernel.org,
        devicetree@vger.kernel.org
In-Reply-To: <20220110040650.18186-2-hnagalla@ti.com>
References: <20220110040650.18186-1-hnagalla@ti.com> <20220110040650.18186-2-hnagalla@ti.com>
Subject: Re: [PATCH 1/2] dt-bindings: remoteproc: k3-m4f: Add bindings for K3 AM64x SoCs
Date:   Mon, 10 Jan 2022 10:48:59 -0600
Message-Id: <1641833339.676351.1067450.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Sun, 09 Jan 2022 22:06:49 -0600, Hari Nagalla wrote:
> K3 AM64x SoC has a Cortex M4F subsystem in the MCU volatge domain.
> The remote processor's life cycle management and IPC mechanisms are
> similar across the R5F and M4F cores from remote processor driver
> point of view. However, there are subtle differences in image loading
> and starting the M4F subsystems.
> 
> The YAML binding document provides the various node properties to be
> configured by the consumers of the M4F subsystem.
> 
> Signed-off-by: Hari Nagalla <hnagalla@ti.com>
> ---
>  .../bindings/remoteproc/ti,k3-m4f-rproc.yaml  | 121 ++++++++++++++++++
>  1 file changed, 121 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml: properties:memory-region: 'anyOf' conditional failed, one must be fixed:
	'minItems' is not one of ['maxItems', 'description', 'deprecated']
		hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
	'additionalItems' is not one of ['maxItems', 'description', 'deprecated']
		hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
	'unevaluatedProperties' is not one of ['maxItems', 'description', 'deprecated']
		hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
	Additional properties are not allowed ('unevaluatedProperties' was unexpected)
		hint: Arrays must be described with a combination of minItems/maxItems/items
	'minItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref']
	'maxItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref']
	'additionalItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref']
	'unevaluatedProperties' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref']
	1 was expected
		hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
	hint: cell array properties must define how many entries and what the entries are when there is more than one entry.
	from schema $id: http://devicetree.org/meta-schemas/core.yaml#
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml: ignoring, error in schema: properties: memory-region
Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.example.dts:19.31-36.11: Warning (unit_address_vs_reg): /example-0/bus@f4000: node has a unit name, but no reg or ranges property
Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.example.dt.yaml:0:0: /example-0/bus@f4000/m4fss@5000000: failed to match any schema with compatible: ['ti,am64-m4fss']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1577759

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.