From:   Christian Hewitt <christianshewitt@gmail.com>
To:     Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Kevin Hilman <khilman@baylibre.com>,
        Neil Armstrong <narmstrong@baylibre.com>,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc:     Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH 3/3] arm64: dts: meson: remove Broadcom WiFi/BT nodes from Khadas VIM1
Date:   Thu, 13 Jan 2022 04:17:46 +0000
Message-Id: <20220113041746.16040-4-christianshewitt@gmail.com>
In-Reply-To: <20220113041746.16040-1-christianshewitt@gmail.com>
References: <20220113041746.16040-1-christianshewitt@gmail.com>
Precedence: bulk

The Broadcom WiFi/BT SDIO nodes are now inherited from the P212 common dtsi
so we can remove them from the VIM1 board dts.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 .../amlogic/meson-gxl-s905x-khadas-vim.dts    | 19 -------------------
 1 file changed, 19 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
index 6ab1cc125b96..108232a5aa2e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts
@@ -217,25 +217,6 @@
 	pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>;
 };
 
-&sd_emmc_a {
-	max-frequency = <100000000>;
-
-	brcmf: wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-	};
-};
-
-&uart_A {
-	bluetooth {
-		compatible = "brcm,bcm43438-bt";
-		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
-		max-speed = <2000000>;
-		clocks = <&wifi32k>;
-		clock-names = "lpo";
-	};
-};
-
 /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
 &uart_AO {
 	status = "okay";
-- 
2.17.1