Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752321AbXBDNMQ (ORCPT ); Sun, 4 Feb 2007 08:12:16 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752322AbXBDNMP (ORCPT ); Sun, 4 Feb 2007 08:12:15 -0500 Received: from cacti.profiwh.com ([85.93.165.66]:56587 "EHLO cacti.profiwh.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752320AbXBDNMO (ORCPT ); Sun, 4 Feb 2007 08:12:14 -0500 Message-ID: <45C5DBBA.20502@gmail.com> Date: Sun, 04 Feb 2007 14:12:26 +0100 From: Jiri Slaby User-Agent: Thunderbird 2.0b2 (X11/20070116) MIME-Version: 1.0 To: Linux Kernel Mailing List , Pavel Subject: hwsusp defunct Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8282 Lines: 209 Hi. When I'm trying to suspend to mem one machine, it wakes immediatly back with nothing notable in dmesg: Stopping tasks: ==========================================================================================================================================================| Suspending console(s) ACPI: PCI interrupt for device 0000:02:0c.0 disabled NVRM: RmPowerManagement: 3 ACPI: PCI interrupt for device 0000:00:1d.7 disabled ACPI: PCI interrupt for device 0000:00:1d.3 disabled ACPI: PCI interrupt for device 0000:00:1d.2 disabled ACPI: PCI interrupt for device 0000:00:1d.1 disabled ACPI: PCI interrupt for device 0000:00:1d.0 disabled Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available Back to C! ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 usb usb2: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 usb usb3: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5 PCI: Setting latency timer of device 0000:00:1d.2 to 64 usb usb4: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.3[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.3 to 64 usb usb5: root hub lost power or was reset ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10 PCI: Setting latency timer of device 0000:00:1d.7 to 64 PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was fff0, writing 30003000) PCI: Setting latency timer of device 0000:00:1e.0 to 64 PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30100000) PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2880007) NVRM: RmPowerManagement: 4 eth0: link down eth1: link down PM: Writing back config space on device 0000:02:0c.0 at offset 1 (was 2900105, writing 2900101) ACPI: PCI Interrupt 0000:02:0c.0[A] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ 5 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 usbdev2.3_ep00: PM: resume from 0, parent 2-2 still 2 usb 2-2:1.0: PM: resume from 2, parent 2-2 still 2 usbdev2.3_ep81: PM: resume from 0, parent 2-2:1.0 still 2 usbdev3.3_ep00: PM: resume from 0, parent 3-2 still 2 usbhid 3-2:1.0: PM: resume from 2, parent 3-2 still 2 usbdev3.3_ep81: PM: resume from 0, parent 3-2:1.0 still 2 Restarting tasks...<6>usb 2-2: USB disconnect, address 3 done usb 2-2: new full speed USB device using uhci_hcd and address 4 usb 2-2: configuration #1 chosen from 1 choice usb 3-2: USB disconnect, address 3 usb 3-2: new low speed USB device using uhci_hcd and address 4 usb 3-2: configuration #1 chosen from 1 choice input: KYE Genius USB Wheel Mouse as /class/input/input5 input: USB HID v1.00 Mouse [KYE Genius USB Wheel Mouse] on usb-0000:00:1d.1-2 hub 1-0:1.0: over-current change on port 5 hub 1-0:1.0: over-current change on port 6 hub 1-0:1.0: over-current change on port 7 hub 1-0:1.0: over-current change on port 8 Note, that this is try after removing of ohci1394 and dvb_usb_dtt200u since: dvb_usb_dtt200u 1-3:1.0: no suspend for driver dvb_usb_dtt200u? dvb_usb_dtt200u 1-3:1.1: no suspend for driver dvb_usb_dtt200u? ohci1394 does not fully support suspend and resume yet I also tried to remove completely nvidia.ko from /lib/modules to not load it and reboot to init level 2 (no X, no net, only few processes) with the very same result. It's nosmp nohigmem configuration with this cpu: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Celeron(R) CPU 2.20GHz stepping : 7 cpu MHz : 2199.095 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr bogomips : 4401.41 with this hardware: PCIs 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02) 00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation NV28 [GeForce4 Ti 4200 AGP 8x] (rev a1) 02:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:0c.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04) 02:0c.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04) 02:0c.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04) USBs Bus 001 Device 006: ID 14aa:0226 AVerMedia (again) or C&E Bus 001 Device 001: ID 0000:0000 Bus 002 Device 004: ID 046d:0920 Logitech, Inc. QuickCam Express Bus 002 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 003 Device 004: ID 0458:000e KYE Systems Corp. (Mouse Systems) VideoCAM Web Bus 003 Device 001: ID 0000:0000 modules currently in: dvb_usb_dtt200u 12804 0 vfat 13184 1 fat 52764 1 vfat sunrpc 159164 1 nvidia 4714324 32 ipv6 227296 18 ipt_MASQUERADE 3584 1 iptable_nat 6788 1 ip_nat 18348 2 ipt_MASQUERADE,iptable_nat ip_conntrack 49260 3 ipt_MASQUERADE,iptable_nat,ip_nat nfnetlink 7064 2 ip_nat,ip_conntrack iptable_filter 3200 0 ip_tables 12872 2 iptable_nat,iptable_filter x_tables 15748 3 ipt_MASQUERADE,iptable_nat,ip_tables binfmt_misc 11528 1 ntfs 104564 2 ieee1394 95668 0 usbhid 32132 0 ide_cd 39456 0 8139too 24832 0 mii 5888 1 8139too cdrom 37152 1 ide_cd dvb_usb 21644 1 dvb_usb_dtt200u dvb_core 80680 1 dvb_usb dvb_pll 14852 1 dvb_usb i2c_core 22160 3 nvidia,dvb_usb,dvb_pll rtc 12212 0 on this kernel Linux Privat 2.6.19-bygep #8 Sun Feb 4 01:12:37 CET 2007 i686 i686 i386 GNU/Linux (-bygep is only naming, no patches or something) I also tried to remove "external irq generators" -- net links, usb mouse... Complete config: http://www.fi.muni.cz/~xslaby/sklad/hwsusp-config dmesgs: http://www.fi.muni.cz/~xslaby/sklad/dmesg.txt http://www.fi.muni.cz/~xslaby/sklad/dmesg1.txt Will PM_DEBUG or ACPI_DEBUG help somehow? Or later kernel? thanks, -- http://www.fi.muni.cz/~xslaby/ Jiri Slaby faculty of informatics, masaryk university, brno, cz e-mail: jirislaby gmail com, gpg pubkey fingerprint: B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/