Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
MIME-Version: 1.0
References: <20220118165316.412735-1-eugene.shalygin@gmail.com> <20220118165316.412735-2-eugene.shalygin@gmail.com>
In-Reply-To: <20220118165316.412735-2-eugene.shalygin@gmail.com>
From:   Eugene Shalygin <eugene.shalygin@gmail.com>
Date:   Wed, 19 Jan 2022 04:25:41 +0100
Message-ID: <CAB95QATvQPZ-s4dCWeqKcSZ9Rfx9uK1AyoM9Kk3biPfvXh5r5g@mail.gmail.com>
Subject: Re: [ASUS EC Sensors v7 1/3] hwmon: (asus-ec-sensors) add driver for
 ASUS EC
To:     Eugene Shalygin <eugene.shalygin@gmail.com>
Cc:     Andy Shevchenko <andy.shevchenko@gmail.com>,
        Denis Pauk <pauk.denis@gmail.com>,
        Jean Delvare <jdelvare@suse.com>,
        Guenter Roeck <linux@roeck-us.net>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        linux-hwmon@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

I did not read carefully what I committed and now two small
corrections are required (see inline). Should I resend again?

On Tue, 18 Jan 2022 at 17:53, Eugene Shalygin <eugene.shalygin@gmail.com> wrote:
> +       DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-F GAMING",
> +               SENSOR_SET_TEMP_CHIPSET_CPU_MB |
> +               SENSOR_TEMP_T_SENSOR | SENSOR_FAN_CHIPSET
Redundant line break.
> +       ),
> +       DMI_EXACT_MATCH_BOARD(VENDOR_ASUS_UPPER_CASE, "ROG STRIX X570-I GAMING",
> +               SENSOR_TEMP_T_SENSOR | SENSOR_FAN_VRM_HS |
> +               SENSOR_FAN_CHIPSET | SENSOR_CURR_CPU),


> +struct ec_sensors_data {
> +       unsigned long board_sensors;
> +       struct ec_sensor *sensors;
> +       /** EC registers to read from */
> +       u16 *registers;
> +       u8 *read_buffer;
> +       /** sorted list of unique register banks */
> +       u8 banks[ASUS_EC_MAX_BANK + 1];
> +       /** in jiffies */
> +       unsigned long last_updated;
> +       acpi_handle aml_mutex;
> +       /** number of board EC sensors */
> +       u8 nr_sensors;
> +       /** number of EC registers to read (sensor might span more than 1 register) */
> +       u8 nr_registers;
> +       /** number of unique register banks */
> +       u8 nr_banks;
> +};

Forgot to remove doc-comments.

Thanks,
Eugene