Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
From:   Michael Ellerman <mpe@ellerman.id.au>
To:     Maxim <bigunclemax@gmail.com>, vladimir.oltean@nxp.com
Cc:     andrew@lunn.ch, benh@kernel.crashing.org, bigunclemax@gmail.com,
        davem@davemloft.net, devicetree@vger.kernel.org, fido_max@inbox.ru,
        linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
        paulus@samba.org, robh+dt@kernel.org
Subject: Re: [PATCH v2] powerpc: dts: t1040rdb: fix ports names for Seville
 Ethernet switch
In-Reply-To: <20220111173723.26212-1-bigunclemax@gmail.com>
References: <20220111152947.6zvt7j7366wsg6o2@skbuf>
 <20220111173723.26212-1-bigunclemax@gmail.com>
Date:   Thu, 20 Jan 2022 17:29:31 +1100
Message-ID: <87czkmudh0.fsf@mpe.ellerman.id.au>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Maxim <bigunclemax@gmail.com> writes:
> From: Maxim Kiselev <bigunclemax@gmail.com>
>
> On board rev A, the network interface labels for the switch ports
> written on the front panel are different than on rev B and later.
>
> This patch fixes network interface names for the switch ports according
> to labels that are written on the front panel of the board rev B.
> They start from ETH3 and end at ETH10.
>
> This patch also introduces a separate device tree for rev A.
> The main device tree is supposed to cover rev B and later.
>
> Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
> Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
> ---
>  arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts | 30 ++++++++++++++++++++
>  arch/powerpc/boot/dts/fsl/t1040rdb.dts       |  8 +++---
>  2 files changed, 34 insertions(+), 4 deletions(-)
>  create mode 100644 arch/powerpc/boot/dts/fsl/t1040rdb-rev-a.dts

I applied this but it generated errors, you should have got some reports
from the kernel build robot.

cheers