Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Date:   Fri, 28 Jan 2022 18:17:21 +0100
From:   Andrew Lunn <andrew@lunn.ch>
To:     Tobias Waldekranz <tobias@waldekranz.com>
Cc:     davem@davemloft.net, kuba@kernel.org, netdev@vger.kernel.org,
        David.Laight@aculab.com, Vivien Didelot <vivien.didelot@gmail.com>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 net-next 1/2] net: dsa: mv88e6xxx: Improve performance
 of busy bit polling
Message-ID: <YfQlIamPBML0JaET@lunn.ch>
References: <20220128162650.2510062-1-tobias@waldekranz.com>
 <20220128162650.2510062-2-tobias@waldekranz.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220128162650.2510062-2-tobias@waldekranz.com>
Precedence: bulk

On Fri, Jan 28, 2022 at 05:26:49PM +0100, Tobias Waldekranz wrote:
> Avoid a long delay when a busy bit is still set and has to be polled
> again.
> 
> Measurements on a system with 2 Opals (6097F) and one Agate (6352)
> show that even with this much tighter loop, we have about a 50% chance
> of the bit being cleared on the first poll, all other accesses see the
> bit being cleared on the second poll.
> 
> On a standard MDIO bus running MDC at 2.5MHz, a single access with 32
> bits of preamble plus 32 bits of data takes 64*(1/2.5MHz) = 25.6us.
> 
> This means that mv88e6xxx_smi_direct_wait took 26us + CPU overhead in
> the fast scenario, but 26us + 1500us + 26us + CPU overhead in the slow
> case - bringing the average close to 1ms.
> 
> With this change in place, the slow case is closer to 2*26us + CPU
> overhead, with the average well below 100us - a 10x improvement.
> 
> This translates to real-world winnings. On a 3-chip 20-port system,
> the modprobe time drops by 88%:
> 
> Before:
> 
> root@coronet:~# time modprobe mv88e6xxx
> real    0m 15.99s
> user    0m 0.00s
> sys     0m 1.52s
> 
> After:
> 
> root@coronet:~# time modprobe mv88e6xxx
> real    0m 2.21s
> user    0m 0.00s
> sys     0m 1.54s
> 
> Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew