Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18;
Message-ID: <91bfb535-9442-9413-cfca-1b5cb08826ed@redhat.com>
Date:   Mon, 31 Jan 2022 15:39:35 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.4.0
Subject: Re: [PATCH v4 01/20] power: supply: core: Refactor
 power_supply_set_input_current_limit_from_supplier()
Content-Language: en-US
To:     Andy Shevchenko <andriy.shevchenko@intel.com>
Cc:     "Rafael J . Wysocki" <rafael@kernel.org>,
        Mika Westerberg <mika.westerberg@linux.intel.com>,
        Mark Gross <markgross@kernel.org>,
        Andy Shevchenko <andy@kernel.org>,
        Wolfram Sang <wsa@kernel.org>,
        Lee Jones <lee.jones@linaro.org>,
        Sebastian Reichel <sre@kernel.org>,
        MyungJoo Ham <myungjoo.ham@samsung.com>,
        Chanwoo Choi <cw00.choi@samsung.com>,
        Ard Biesheuvel <ardb@kernel.org>, Len Brown <lenb@kernel.org>,
        linux-acpi@vger.kernel.org, Yauhen Kharuzhy <jekhor@gmail.com>,
        Tsuchiya Yuto <kitakar@gmail.com>,
        Fabio Aiuto <fabioaiuto83@gmail.com>,
        platform-driver-x86@vger.kernel.org, linux-pm@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-efi@vger.kernel.org
References: <20220130204557.15662-1-hdegoede@redhat.com>
 <20220130204557.15662-2-hdegoede@redhat.com>
 <YffmDCHY6csr0uyD@smile.fi.intel.com>
From:   Hans de Goede <hdegoede@redhat.com>
In-Reply-To: <YffmDCHY6csr0uyD@smile.fi.intel.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

Hi Andy,

Thank you for the reviews.

On 1/31/22 14:37, Andy Shevchenko wrote:
> On Sun, Jan 30, 2022 at 09:45:38PM +0100, Hans de Goede wrote:
>> Some (USB) charger ICs have variants with USB D+ and D- pins to do their
>> own builtin charger-type detection, like e.g. the bq24190 and bq25890 and
>> also variants which lack this functionality, e.g. the bq24192 and bq25892.
>>
>> In case the charger-type; and thus the input-current-limit detection is
>> done outside the charger IC then we need some way to communicate this to
>> the charger IC. In the past extcon was used for this, but if the external
>> detection does e.g. full USB PD negotiation then the extcon cable-types do
>> not convey enough information.
>>
>> For these setups it was decided to model the external charging "brick"
>> and the parameters negotiated with it as a power_supply class-device
>> itself; and power_supply_set_input_current_limit_from_supplier() was
>> introduced to allow drivers to get the input-current-limit this way.
>>
>> But in some cases psy drivers may want to know other properties, e.g. the
>> bq25892 can do "quick-charge" negotiation by pulsing its current draw,
>> but this should only be done if the usb_type psy-property of its supplier
>> is set to DCP (and device-properties indicate the board allows higher
>> voltages).
>>
>> Instead of adding extra helper functions for each property which
>> a psy-driver wants to query from its supplier, refactor
>> power_supply_set_input_current_limit_from_supplier() into a
>> more generic power_supply_get_property_from_supplier() function.
> 
> ...
> 
>> +	ret = power_supply_get_property_from_supplier(bdi->charger,
>> +						      POWER_SUPPLY_PROP_CURRENT_MAX,
>> +						      &val);
>> +	if (ret == 0)
> 
> Can it be as simple as
> 
> 	if (ret)
> 		return;
> 
> 	...
> 
> 
> ?
> 
> Or did I misunderstand the meaning of 0?

Yes that would be better and together with some of the other tweaks
you've suggested I believe that this warrants a version 5. So I'll
address a v5 addressing all your comment.

Regards,

Hans