Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 02 Feb 2022 10:23:47 +0000
From:   Paul Cercueil <paul@crapouillou.net>
Subject: Re: [PATCH v12 2/9] drm/ingenic: Add support for JZ4780 and HDMI
 output
To:     "H. Nikolaus Schaller" <hns@goldelico.com>
Cc:     Rob Herring <robh+dt@kernel.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
        Geert Uytterhoeven <geert+renesas@glider.be>,
        Kees Cook <keescook@chromium.org>,
        "Eric W. Biederman" <ebiederm@xmission.com>,
        Miquel Raynal <miquel.raynal@bootlin.com>,
        David Airlie <airlied@linux.ie>,
        Daniel Vetter <daniel@ffwll.ch>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Robert Foss <robert.foss@linaro.org>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Harry Wentland <harry.wentland@amd.com>,
        Sam Ravnborg <sam@ravnborg.org>,
        Maxime Ripard <maxime@cerno.tech>,
        Hans Verkuil <hverkuil-cisco@xs4all.nl>,
        Liam Girdwood <lgirdwood@gmail.com>,
        Mark Brown <broonie@kernel.org>,
        Paul Boddie <paul@boddie.org.uk>,
        Andrzej Hajda <andrzej.hajda@intel.com>,
        Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
        devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
        linux-kernel@vger.kernel.org, letux-kernel@openphoenux.org,
        Jonas Karlman <jonas@kwiboo.se>,
        dri-devel@lists.freedesktop.org,
        Ezequiel Garcia <ezequiel@collabora.com>
Message-Id: <N7AO6R.7I6FABF106MT1@crapouillou.net>
In-Reply-To: <6a7b188769a7ad477bf8cb71e1b9bc086b92388d.1643632014.git.hns@goldelico.com>
References: <cover.1643632014.git.hns@goldelico.com>
        <6a7b188769a7ad477bf8cb71e1b9bc086b92388d.1643632014.git.hns@goldelico.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1; format=flowed
Content-Transfer-Encoding: 8BIT
Precedence: bulk

Hi Nikolaus,

Le lun., janv. 31 2022 at 13:26:48 +0100, H. Nikolaus Schaller 
<hns@goldelico.com> a ?crit :
> From: Paul Boddie <paul@boddie.org.uk>
> 
> Add support for the LCD controller present on JZ4780 SoCs.
> This SoC uses 8-byte descriptors which extend the current
> 4-byte descriptors used for other Ingenic SoCs.
> 
> Tested on MIPS Creator CI20 board.
> 
> Signed-off-by: Paul Boddie <paul@boddie.org.uk>
> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> ---
>  drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 61 
> ++++++++++++++++++++++-
>  drivers/gpu/drm/ingenic/ingenic-drm.h     | 38 ++++++++++++++
>  2 files changed, 98 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c 
> b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> index 9c60fc4605e4b..ccdb9eedd9247 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
> @@ -6,6 +6,7 @@
> 
>  #include "ingenic-drm.h"
> 
> +#include <linux/bitfield.h>
>  #include <linux/component.h>
>  #include <linux/clk.h>
>  #include <linux/dma-mapping.h>
> @@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
>  	u32 addr;
>  	u32 id;
>  	u32 cmd;
> +	/* extended hw descriptor for jz4780 */
> +	u32 offsize;
> +	u32 pagewidth;
> +	u32 cpos;
> +	u32 dessize;
>  } __aligned(16);
> 
>  struct ingenic_dma_hwdescs {
> @@ -59,7 +65,9 @@ struct ingenic_dma_hwdescs {
>  struct jz_soc_info {
>  	bool needs_dev_clk;
>  	bool has_osd;
> +	bool has_alpha;
>  	bool map_noncoherent;
> +	bool use_extended_hwdesc;
>  	unsigned int max_width, max_height;
>  	const u32 *formats_f0, *formats_f1;
>  	unsigned int num_formats_f0, num_formats_f1;
> @@ -446,6 +454,9 @@ static int ingenic_drm_plane_atomic_check(struct 
> drm_plane *plane,
>  	if (!crtc)
>  		return 0;
> 
> +	if (plane == &priv->f0)
> +		return -EINVAL;

This will break JZ4725B -> JZ4770 SoCs, the f0 plane is perfectly 
usable there.

Cheers,
-Paul

> +
>  	crtc_state = drm_atomic_get_existing_crtc_state(state,
>  							crtc);
>  	if (WARN_ON(!crtc_state))
> @@ -662,6 +673,33 @@ static void 
> ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>  		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
>  		hwdesc->next = dma_hwdesc_addr(priv, next_id);
> 
> +		if (priv->soc_info->use_extended_hwdesc) {
> +			hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
> +
> +			/* Extended 8-byte descriptor */
> +			hwdesc->cpos = 0;
> +			hwdesc->offsize = 0;
> +			hwdesc->pagewidth = 0;
> +
> +			switch (newstate->fb->format->format) {
> +			case DRM_FORMAT_XRGB1555:
> +				hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
> +				fallthrough;
> +			case DRM_FORMAT_RGB565:
> +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
> +				break;
> +			case DRM_FORMAT_XRGB8888:
> +				hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
> +				break;
> +			}
> +			hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
> +					 JZ_LCD_CPOS_COEFFICIENT_OFFSET);
> +			hwdesc->dessize =
> +				(0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
> +				FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
> +				FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
> +		}
> +
>  		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
>  			fourcc = newstate->fb->format->format;
> 
> @@ -693,6 +731,9 @@ static void 
> ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
>  		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
>  	}
> 
> +	if (priv->soc_info->use_extended_hwdesc)
> +		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
> +
>  	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
>  		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
>  	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
> @@ -1015,6 +1056,7 @@ static int ingenic_drm_bind(struct device *dev, 
> bool has_components)
>  	long parent_rate;
>  	unsigned int i, clone_mask = 0;
>  	int ret, irq;
> +	u32 osdc = 0;
> 
>  	soc_info = of_device_get_match_data(dev);
>  	if (!soc_info) {
> @@ -1272,7 +1314,10 @@ static int ingenic_drm_bind(struct device 
> *dev, bool has_components)
> 
>  	/* Enable OSD if available */
>  	if (soc_info->has_osd)
> -		regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
> +		osdc |= JZ_LCD_OSDC_OSDEN;
> +	if (soc_info->has_alpha)
> +		osdc |= JZ_LCD_OSDC_ALPHAEN;
> +	regmap_write(priv->map, JZ_REG_LCD_OSDC, osdc);
> 
>  	mutex_init(&priv->clk_mutex);
>  	priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
> @@ -1468,10 +1513,24 @@ static const struct jz_soc_info 
> jz4770_soc_info = {
>  	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
>  };
> 
> +static const struct jz_soc_info jz4780_soc_info = {
> +	.needs_dev_clk = true,
> +	.has_osd = true,
> +	.has_alpha = true,
> +	.use_extended_hwdesc = true,
> +	.max_width = 4096,
> +	.max_height = 2048,
> +	.formats_f1 = jz4770_formats_f1,
> +	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
> +	.formats_f0 = jz4770_formats_f0,
> +	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
> +};
> +
>  static const struct of_device_id ingenic_drm_of_match[] = {
>  	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
>  	{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
>  	{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
> +	{ .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
>  	{ /* sentinel */ },
>  };
>  MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h 
> b/drivers/gpu/drm/ingenic/ingenic-drm.h
> index 22654ac1dde1c..cb1d09b625881 100644
> --- a/drivers/gpu/drm/ingenic/ingenic-drm.h
> +++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
> @@ -44,8 +44,11 @@
>  #define JZ_REG_LCD_XYP1				0x124
>  #define JZ_REG_LCD_SIZE0			0x128
>  #define JZ_REG_LCD_SIZE1			0x12c
> +#define JZ_REG_LCD_PCFG				0x2c0
> 
>  #define JZ_LCD_CFG_SLCD				BIT(31)
> +#define JZ_LCD_CFG_DESCRIPTOR_8			BIT(28)
> +#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN	BIT(25)
>  #define JZ_LCD_CFG_PS_DISABLE			BIT(23)
>  #define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
>  #define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
> @@ -63,6 +66,7 @@
>  #define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
>  #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
>  #define JZ_LCD_CFG_18_BIT			BIT(7)
> +#define JZ_LCD_CFG_24_BIT			BIT(6)
>  #define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
> 
>  #define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
> @@ -132,6 +136,7 @@
>  #define JZ_LCD_CMD_SOF_IRQ			BIT(31)
>  #define JZ_LCD_CMD_EOF_IRQ			BIT(30)
>  #define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
> +#define JZ_LCD_CMD_FRM_ENABLE			BIT(26)
> 
>  #define JZ_LCD_SYNC_MASK			0x3ff
> 
> @@ -153,6 +158,7 @@
>  #define JZ_LCD_RGBC_EVEN_BGR			(0x5 << 0)
> 
>  #define JZ_LCD_OSDC_OSDEN			BIT(0)
> +#define JZ_LCD_OSDC_ALPHAEN			BIT(2)
>  #define JZ_LCD_OSDC_F0EN			BIT(3)
>  #define JZ_LCD_OSDC_F1EN			BIT(4)
> 
> @@ -176,6 +182,38 @@
>  #define JZ_LCD_SIZE01_WIDTH_LSB			0
>  #define JZ_LCD_SIZE01_HEIGHT_LSB		16
> 
> +#define JZ_LCD_DESSIZE_ALPHA_OFFSET		24
> +#define JZ_LCD_DESSIZE_HEIGHT_MASK		GENMASK(23, 12)
> +#define JZ_LCD_DESSIZE_WIDTH_MASK		GENMASK(11, 0)
> +
> +#define JZ_LCD_CPOS_BPP_15_16			(4 << 27)
> +#define JZ_LCD_CPOS_BPP_18_24			(5 << 27)
> +#define JZ_LCD_CPOS_BPP_30			(7 << 27)
> +#define JZ_LCD_CPOS_RGB555			BIT(30)
> +#define JZ_LCD_CPOS_PREMULTIPLY_LCD		BIT(26)
> +#define JZ_LCD_CPOS_COEFFICIENT_OFFSET		24
> +#define JZ_LCD_CPOS_COEFFICIENT_0		0
> +#define JZ_LCD_CPOS_COEFFICIENT_1		1
> +#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1		2
> +#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1	3
> +
> +#define JZ_LCD_RGBC_RGB_PADDING			BIT(15)
> +#define JZ_LCD_RGBC_RGB_PADDING_FIRST		BIT(14)
> +#define JZ_LCD_RGBC_422				BIT(8)
> +#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE		BIT(7)
> +
> +#define JZ_LCD_PCFG_PRI_MODE			BIT(31)
> +#define JZ_LCD_PCFG_HP_BST_4			(0 << 28)
> +#define JZ_LCD_PCFG_HP_BST_8			(1 << 28)
> +#define JZ_LCD_PCFG_HP_BST_16			(2 << 28)
> +#define JZ_LCD_PCFG_HP_BST_32			(3 << 28)
> +#define JZ_LCD_PCFG_HP_BST_64			(4 << 28)
> +#define JZ_LCD_PCFG_HP_BST_16_CONT		(5 << 28)
> +#define JZ_LCD_PCFG_HP_BST_DISABLE		(7 << 28)
> +#define JZ_LCD_PCFG_THRESHOLD2_OFFSET		18
> +#define JZ_LCD_PCFG_THRESHOLD1_OFFSET		9
> +#define JZ_LCD_PCFG_THRESHOLD0_OFFSET		0
> +
>  struct device;
>  struct drm_plane;
>  struct drm_plane_state;
> --
> 2.33.0
>