Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
To:     jeanmichel.hautbois@ideasonboard.com
Cc:     dave.stevenson@raspberrypi.com, devicetree@vger.kernel.org,
        kernel-list@raspberrypi.com, laurent.pinchart@ideasonboard.com,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-media@vger.kernel.org, linux-rpi-kernel@lists.infradead.org,
        lukasz@jany.st, mchehab@kernel.org, naush@raspberrypi.com,
        robh@kernel.org, tomi.valkeinen@ideasonboard.com
Subject: [RFC PATCH v3 05/11] ARM: dts: bcm2711: Add unicam CSI nodes
Date:   Wed,  2 Feb 2022 18:56:33 +0100
Message-Id: <20220202175639.149681-6-jeanmichel.hautbois@ideasonboard.com>
In-Reply-To: <20220202175639.149681-1-jeanmichel.hautbois@ideasonboard.com>
References: <20220202175639.149681-1-jeanmichel.hautbois@ideasonboard.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add both MIPI CSI-2 nodes in the core bcm2711 tree. Use the 3-cells
interrupt declaration, corresponding clocks and default as disabled.

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
---
 arch/arm/boot/dts/bcm2711.dtsi | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index dff18fc9a906..9ad50d4c0c16 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -3,6 +3,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/soc/bcm2835-pm.h>
+#include <dt-bindings/power/raspberrypi-power.h>
 
 / {
 	compatible = "brcm,bcm2711";
@@ -293,6 +294,30 @@ hvs: hvs@7e400000 {
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		csi0: csi@7e800000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e800000 0x800>,
+			      <0x7e802000 0x4>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_CAM0>,
+				 <&firmware_clocks 4>;
+			clock-names = "lp", "vpu";
+			power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
+			status = "disabled";
+		};
+
+		csi1: csi@7e801000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e801000 0x800>,
+			      <0x7e802004 0x4>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_CAM1>,
+				 <&firmware_clocks 4>;
+			clock-names = "lp", "vpu";
+			power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+			status = "disabled";
+		};
+
 		pixelvalve3: pixelvalve@7ec12000 {
 			compatible = "brcm,bcm2711-pixelvalve3";
 			reg = <0x7ec12000 0x100>;
-- 
2.32.0