Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 2 Feb 2022 12:54:59 -0800
From:   Drew Fustini <dfustini@baylibre.com>
To:     Tony Lindgren <tony@atomide.com>
Cc:     Daniel Lezcano <daniel.lezcano@linaro.org>,
        Thomas Gleixner <tglx@linutronix.de>,
        Keerthy <j-keerthy@ti.com>, linux-kernel@vger.kernel.org,
        linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        Tero Kristo <kristo@kernel.org>, Suman Anna <s-anna@ti.com>
Subject: Re: [PATCH 2/2] clocksource/drivers/timer-ti-dm: Handle dra7 timer
 wrap errata i940
Message-ID: <Yfrvo+kVd9ZHJjBX@x1>
References: <20210323074326.28302-1-tony@atomide.com>
 <20210323074326.28302-3-tony@atomide.com>
 <YfWsG0p6to3IJuvE@x1>
 <Yfe25rpSY8OFPxzr@atomide.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <Yfe25rpSY8OFPxzr@atomide.com>
Precedence: bulk

On Mon, Jan 31, 2022 at 12:16:06PM +0200, Tony Lindgren wrote:
> Hi,
> 
> * Drew Fustini <dfustini@baylibre.com> [220129 21:05]:
> > On Tue, Mar 23, 2021 at 09:43:26AM +0200, Tony Lindgren wrote:
> > > There is a timer wrap issue on dra7 for the ARM architected timer.
> > > In a typical clock configuration the timer fails to wrap after 388 days.
> > > 
> > > To work around the issue, we need to use timer-ti-dm percpu timers instead.
> > > 
> > > Let's configure dmtimer3 and 4 as percpu timers by default, and warn about
> > > the issue if the dtb is not configured properly.
> > 
> > Hi Tony,
> > 
> > This causes a conflict for IPU2 which is using timer 3 and 4.
> > 
> > From arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi:
> > 
> >   &ipu2 {
> >           mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
> >           ti,timers = <&timer3>;
> >           ti,watchdog-timers = <&timer4>, <&timer9>;
> >   };
> 
> OK, sorry I missed that part.
> 
> > I noticed an error ("could not get timer platform device") when booting
> > mainline on a BeagleBoard X15 (AM578):
> > 
> >   omap-rproc 55020000.ipu: assigned reserved memory node ipu2-memory@95800000
> >   remoteproc remoteproc1: 55020000.ipu is available
> >   remoteproc remoteproc1: powering up 55020000.ipu
> >   remoteproc remoteproc1: Booting fw image dra7-ipu2-fw.xem4, size 3747220
> >   omap-rproc 55020000.ipu: could not get timer platform device
> >   omap-rproc 55020000.ipu: omap_rproc_enable_timers failed: -19
> >   remoteproc remoteproc1: can't start rproc 55020000.ipu: -19
> > 
> > I switched this errata fix to use timer 15 and 16 instead which resolves
> > the error.  Do you think that is an acceptable solution?
> 
> I think the only difference is that timers 15 and 16 are in l4_per3 instead
> of l4_per1. I doubt that matters as they are pretty much always clocked in
> this case. If you want to check you can run cyclictest :)

I ran this with existing errata fix with dmtimer 3 and 4:

root@am57xx-evm:~# cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0
# /dev/cpu_dma_latency set to 0us
policy: fifo: loadavg: 0.02 0.03 0.05 

T: 0 ( 1449) P:80 I:200 C: 800368 Min:      0 Act:   32 Avg:   22 Max:     128
T: 1 ( 1450) P:80 I:200 C: 800301 Min:      0 Act:   12 Avg:   23 Max:      70

And the results after my switch to dmtimer 15 and 16:

root@am57xx-evm:~# cyclictest --mlockall --smp --priority=80 --interval=200 --distance=0
# /dev/cpu_dma_latency set to 0us
policy: fifo: loadavg: 0.36 0.19 0.07

T: 0 ( 1711) P:80 I:200 C: 759599 Min:      0 Act:    6 Avg:   22 Max:     108
T: 1 ( 1712) P:80 I:200 C: 759539 Min:      0 Act:   19 Avg:   23 Max:      79

This doesn't appear to show any latency regression.

Any other options for cyclictest that that you'd recommend trying?

Thank you,
Drew