Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
IronPort-SDR: zpZdcWx37nKUNCq1otdCfN9xDfpo9XBmq4KvCYeAQV+8TuLvlspfalhFwIiH8pGgnTHshrIjjp
 OURIJqpcWtTPf+RZ5NTrz1hzdnQTbmIugMAT+VL9SuLhJ0JYP59d7kQNqNl132NfS/QJOxLuQg
 I+hRQCDIicV/4dovh7IQONReCDyTJk3feoq7mhRHjdzY3wY6J6i0y7sSomGy3XHYGVITkcnTkw
 y0wQTffP9lxZb6TNYFuHyT+qCWNyWXZadqOJPHIJjWlB6JASRAT6qQT/thOq9RX9ehT1IExfcH
 pAGFoszifsopF/mXTr34MzTg
From:   Horatiu Vultur <horatiu.vultur@microchip.com>
To:     <linux-gpio@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
CC:     <linus.walleij@linaro.org>, <robh+dt@kernel.org>,
        <lars.povlsen@microchip.com>, <Steen.Hegelund@microchip.com>,
        <UNGLinuxDriver@microchip.com>,
        Horatiu Vultur <horatiu.vultur@microchip.com>
Subject: [PATCH 2/2] arm64: dts: sparx5: Fix for sgpio nodes
Date:   Fri, 4 Feb 2022 16:35:35 +0100
Message-ID: <20220204153535.465827-3-horatiu.vultur@microchip.com>
In-Reply-To: <20220204153535.465827-1-horatiu.vultur@microchip.com>
References: <20220204153535.465827-1-horatiu.vultur@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

When the support for irqs was added for sgpio driver the memory size was
not updated. Because the irq registers are found at address 0x108.

Fixes: d0f482bb06f944 ("arm64: dts: sparx5: Add the Sparx5 switch node")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
 arch/arm64/boot/dts/microchip/sparx5.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/microchip/sparx5.dtsi b/arch/arm64/boot/dts/microchip/sparx5.dtsi
index 787ebcec121d..b9f2e2fa3d43 100644
--- a/arch/arm64/boot/dts/microchip/sparx5.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5.dtsi
@@ -305,7 +305,7 @@ sgpio0: gpio@61101036c {
 			pinctrl-names = "default";
 			resets = <&reset 0>;
 			reset-names = "switch";
-			reg = <0x6 0x1101036c 0x100>;
+			reg = <0x6 0x1101036c 0x118>;
 			sgpio_in0: gpio@0 {
 				compatible = "microchip,sparx5-sgpio-bank";
 				reg = <0>;
@@ -335,7 +335,7 @@ sgpio1: gpio@611010484 {
 			pinctrl-names = "default";
 			resets = <&reset 0>;
 			reset-names = "switch";
-			reg = <0x6 0x11010484 0x100>;
+			reg = <0x6 0x11010484 0x118>;
 			sgpio_in1: gpio@0 {
 				compatible = "microchip,sparx5-sgpio-bank";
 				reg = <0>;
@@ -365,7 +365,7 @@ sgpio2: gpio@61101059c {
 			pinctrl-names = "default";
 			resets = <&reset 0>;
 			reset-names = "switch";
-			reg = <0x6 0x1101059c 0x100>;
+			reg = <0x6 0x1101059c 0x118>;
 			sgpio_in2: gpio@0 {
 				reg = <0>;
 				compatible = "microchip,sparx5-sgpio-bank";
-- 
2.33.0