Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Iwona Winiarska <iwona.winiarska@intel.com>
To:     linux-kernel@vger.kernel.org, openbmc@lists.ozlabs.org,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc:     devicetree@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
        linux-arm-kernel@lists.infradead.org, linux-hwmon@vger.kernel.org,
        linux-doc@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
        Joel Stanley <joel@jms.id.au>,
        Andrew Jeffery <andrew@aj.id.au>,
        Jean Delvare <jdelvare@suse.com>,
        Guenter Roeck <linux@roeck-us.net>,
        Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
        Jonathan Corbet <corbet@lwn.net>,
        Borislav Petkov <bp@alien8.de>,
        Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
        Tony Luck <tony.luck@intel.com>,
        Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
        Dan Williams <dan.j.williams@intel.com>,
        Randy Dunlap <rdunlap@infradead.org>,
        Zev Weiss <zweiss@equinix.com>,
        David Muller <d.mueller@elsoft.ch>,
        Dave Hansen <dave.hansen@intel.com>,
        Billy Tsai <billy_tsai@aspeedtech.com>,
        Iwona Winiarska <iwona.winiarska@intel.com>,
        Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Subject: [PATCH v8 03/13] ARM: dts: aspeed: Add PECI controller nodes
Date:   Tue,  8 Feb 2022 16:36:29 +0100
Message-Id: <20220208153639.255278-4-iwona.winiarska@intel.com>
In-Reply-To: <20220208153639.255278-1-iwona.winiarska@intel.com>
References: <20220208153639.255278-1-iwona.winiarska@intel.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add PECI controller nodes with all required information.

Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
---
 arch/arm/boot/dts/aspeed-g4.dtsi | 11 +++++++++++
 arch/arm/boot/dts/aspeed-g5.dtsi | 11 +++++++++++
 arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
 3 files changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index f14dace34c5a..fa8b581c3d6c 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -392,6 +392,17 @@ uart_routing: uart-routing@9c {
 				};
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2400-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 7495f93c5069..4147b397c883 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -516,6 +516,17 @@ ibt: ibt@140 {
 				};
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2500-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			uart2: serial@1e78d000 {
 				compatible = "ns16550a";
 				reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index c32e87fad4dc..3d5ce9da42c3 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -512,6 +512,17 @@ wdt4: watchdog@1e7850c0 {
 				status = "disabled";
 			};
 
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2600-peci";
+				reg = <0x1e78b000 0x100>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-- 
2.34.1