Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 9 Feb 2022 18:36:23 -0800
From:   Jakub Kicinski <kuba@kernel.org>
To:     Mans Rullgard <mans@mansr.com>
Cc:     Andrew Lunn <andrew@lunn.ch>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        Florian Fainelli <f.fainelli@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Vladimir Oltean <olteanv@gmail.com>,
        Juergen Borleis <kernel@pengutronix.de>,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] net: dsa: lan9303: fix reset on probe
Message-ID: <20220209183623.54369689@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com>
In-Reply-To: <20220209145454.19749-1-mans@mansr.com>
References: <20220209145454.19749-1-mans@mansr.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Precedence: bulk

On Wed,  9 Feb 2022 14:54:54 +0000 Mans Rullgard wrote:
> The reset input to the LAN9303 chip is active low, and devicetree
> gpio handles reflect this.  Therefore, the gpio should be requested
> with an initial state of high in order for the reset signal to be
> asserted.  Other uses of the gpio already use the correct polarity.
> 
> Signed-off-by: Mans Rullgard <mans@mansr.com>

Pending Andrew's review, this is the correct fixes tag, right?

Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")