Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Sankeerth Billakanti <quic_sbillaka@quicinc.com>
To:     <dri-devel@lists.freedesktop.org>, <linux-arm-msm@vger.kernel.org>,
        <freedreno@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <agross@kernel.org>,
        <bjorn.andersson@linaro.org>, <robh+dt@kernel.org>,
        <robdclark@gmail.com>, <seanpaul@chromium.org>,
        <swboyd@chromium.org>, <dianders@chromium.org>,
        <krzysztof.kozlowski@canonical.com>, <thierry.reding@gmail.com>,
        <sam@ravnborg.org>, <airlied@linux.ie>, <daniel@ffwll.ch>
CC:     Sankeerth Billakanti <quic_sbillaka@quicinc.com>,
        <quic_kalyant@quicinc.com>, <quic_abhinavk@quicinc.com>,
        <quic_khsieh@quicinc.com>, <quic_mkrishn@quicinc.com>,
        <quic_vproddut@quicinc.com>
Subject: [PATCH v4 2/5] arm64: dts: qcom: sc7280: Add support for eDP panel on CRD
Date:   Thu, 10 Feb 2022 17:27:32 +0530
Message-ID: <1644494255-6632-3-git-send-email-quic_sbillaka@quicinc.com>
In-Reply-To: <1644494255-6632-1-git-send-email-quic_sbillaka@quicinc.com>
References: <1644494255-6632-1-git-send-email-quic_sbillaka@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Enable the eDP display panel support without HPD on sc7280 platform.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---

Changes in v4:
  - Create new patch for name changes
  - Remove output-low

Changes in v3:
  - Sort the nodes alphabetically
  - Use - instead of _ as node names
  - Place the backlight and panel nodes under root
  - Change the name of edp_out to mdss_edp_out
  - Change the names of regulator nodes
  - Delete unused properties in the board file


Changes in v2:
  - Sort node references alphabetically
  - Improve readability
  - Move the pwm pinctrl to pwm node
  - Move the regulators to root
  - Define backlight power
  - Remove dummy regulator node
  - Cleanup pinctrl definitions

 arch/arm64/boot/dts/qcom/sc7280-crd.dts | 120 ++++++++++++++++++++++++++++++++
 1 file changed, 120 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
index e2efbdd..6dba5ac 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -21,6 +21,59 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	backlight_3v3_regulator: backlight-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight_3v3_regulator";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_power>;
+	};
+
+	edp_3v3_regulator: edp-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "edp_3v3_regulator";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 80 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_panel_power>;
+	};
+
+	edp_backlight: edp-backlight {
+		compatible = "pwm-backlight";
+
+		power-supply = <&backlight_3v3_regulator>;
+		pwms = <&pm8350c_pwm 3 65535>;
+	};
+
+	edp_panel: edp-panel {
+		compatible = "sharp,lq140m1jw46";
+
+		power-supply = <&edp_3v3_regulator>;
+		backlight = <&edp_backlight>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+				edp_panel_in: endpoint {
+					remote-endpoint = <&edp_out>;
+				};
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -76,6 +129,44 @@ ap_ts_pen_1v8: &i2c13 {
 	};
 };
 
+&edp_out {
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hot_plug_det>;
+	data-lanes = <0 1>;
+	vdda-1p2-supply = <&vreg_l6b_1p2>;
+	vdda-0p9-supply = <&vreg_l1b_0p8>;
+};
+
+&mdss_edp {
+	status = "okay";
+
+	vdda-1p2-supply = <&vreg_l6b_1p2>;
+	vdda-0p9-supply = <&vreg_l10c_0p8>;
+	/delete-property/ pinctrl-names;
+	/delete-property/ pinctrl-0;
+};
+
+&mdss_edp_phy {
+	status = "okay";
+
+	vdda-1p2-supply = <&vreg_l6b_1p2>;
+	vdda-0p9-supply = <&vreg_l10c_0p8>;
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &nvme_3v3_regulator {
 	gpio = <&tlmm 51 GPIO_ACTIVE_HIGH>;
 };
@@ -84,7 +175,36 @@ ap_ts_pen_1v8: &i2c13 {
 	pins = "gpio51";
 };
 
+&pm8350c_gpios {
+	edp_bl_power: edp-bl-power {
+		pins = "gpio7";
+		function = "normal";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-pull-down;
+	};
+
+	edp_bl_pwm: edp-bl-pwm {
+		pins = "gpio8";
+		function = "func1";
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		bias-pull-down;
+	};
+};
+
+&pm8350c_pwm {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_bl_pwm>;
+};
+
 &tlmm {
+	edp_panel_power: edp-panel-power {
+		pins = "gpio80";
+		function = "gpio";
+		bias-pull-down;
+	};
+
 	tp_int_odl: tp-int-odl {
 		pins = "gpio7";
 		function = "gpio";
-- 
2.7.4