Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Liam Beguin <liambeguin@gmail.com>
To:     liambeguin@gmail.com, peda@axentia.se, jic23@kernel.org,
        andy.shevchenko@gmail.com, lars@metafoo.de
Cc:     linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
        devicetree@vger.kernel.org, robh+dt@kernel.org
Subject: [PATCH v15 07/10] iio: afe: rescale: add RTD temperature sensor support
Date:   Sat, 12 Feb 2022 21:57:36 -0500
Message-Id: <20220213025739.2561834-8-liambeguin@gmail.com>
In-Reply-To: <20220213025739.2561834-1-liambeguin@gmail.com>
References: <20220213025739.2561834-1-liambeguin@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

An RTD (Resistance Temperature Detector) is a kind of temperature
sensor used to get a linear voltage to temperature reading within a
give range (usually 0 to 100 degrees Celsius). Common types of RTDs
include PT100, PT500, and PT1000.

Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Peter Rosin <peda@axentia.se>
---
 drivers/iio/afe/iio-rescale.c | 48 +++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/drivers/iio/afe/iio-rescale.c b/drivers/iio/afe/iio-rescale.c
index 46947c68d3a9..e31a93435536 100644
--- a/drivers/iio/afe/iio-rescale.c
+++ b/drivers/iio/afe/iio-rescale.c
@@ -394,10 +394,52 @@ static int rescale_voltage_divider_props(struct device *dev,
 	return 0;
 }
 
+static int rescale_temp_sense_rtd_props(struct device *dev,
+					struct rescale *rescale)
+{
+	u32 factor;
+	u32 alpha;
+	u32 iexc;
+	u32 tmp;
+	int ret;
+	u32 r0;
+
+	ret = device_property_read_u32(dev, "excitation-current-microamp",
+				       &iexc);
+	if (ret) {
+		dev_err(dev, "failed to read excitation-current-microamp: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = device_property_read_u32(dev, "alpha-ppm-per-celsius", &alpha);
+	if (ret) {
+		dev_err(dev, "failed to read alpha-ppm-per-celsius: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = device_property_read_u32(dev, "r-naught-ohms", &r0);
+	if (ret) {
+		dev_err(dev, "failed to read r-naught-ohms: %d\n", ret);
+		return ret;
+	}
+
+	tmp = r0 * iexc * alpha / 1000000;
+	factor = gcd(tmp, 1000000);
+	rescale->numerator = 1000000 / factor;
+	rescale->denominator = tmp / factor;
+
+	rescale->offset = -1 * ((r0 * iexc) / 1000);
+
+	return 0;
+}
+
 enum rescale_variant {
 	CURRENT_SENSE_AMPLIFIER,
 	CURRENT_SENSE_SHUNT,
 	VOLTAGE_DIVIDER,
+	TEMP_SENSE_RTD,
 };
 
 static const struct rescale_cfg rescale_cfg[] = {
@@ -413,6 +455,10 @@ static const struct rescale_cfg rescale_cfg[] = {
 		.type = IIO_VOLTAGE,
 		.props = rescale_voltage_divider_props,
 	},
+	[TEMP_SENSE_RTD] = {
+		.type = IIO_TEMP,
+		.props = rescale_temp_sense_rtd_props,
+	},
 };
 
 static const struct of_device_id rescale_match[] = {
@@ -422,6 +468,8 @@ static const struct of_device_id rescale_match[] = {
 	  .data = &rescale_cfg[CURRENT_SENSE_SHUNT], },
 	{ .compatible = "voltage-divider",
 	  .data = &rescale_cfg[VOLTAGE_DIVIDER], },
+	{ .compatible = "temperature-sense-rtd",
+	  .data = &rescale_cfg[TEMP_SENSE_RTD], },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, rescale_match);
-- 
2.35.1.4.g5d01301f2b86