Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To:     mhi@lists.linux.dev
Cc:     quic_hemantk@quicinc.com, quic_bbhatt@quicinc.com,
        quic_jhugo@quicinc.com, vinod.koul@linaro.org,
        bjorn.andersson@linaro.org, dmitry.baryshkov@linaro.org,
        quic_vbadigan@quicinc.com, quic_cang@quicinc.com,
        quic_skananth@quicinc.com, linux-arm-msm@vger.kernel.org,
        linux-kernel@vger.kernel.org, elder@linaro.org,
        Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v3 20/25] bus: mhi: ep: Add support for processing command ring
Date:   Sat, 12 Feb 2022 23:51:12 +0530
Message-Id: <20220212182117.49438-21-manivannan.sadhasivam@linaro.org>
In-Reply-To: <20220212182117.49438-1-manivannan.sadhasivam@linaro.org>
References: <20220212182117.49438-1-manivannan.sadhasivam@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add support for processing the command ring. Command ring is used by the
host to issue channel specific commands to the ep device. Following
commands are supported:

1. Start channel
2. Stop channel
3. Reset channel

Once the device receives the command doorbell interrupt from host, it
executes the command and generates a command completion event to the
host in the primary event ring.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/bus/mhi/ep/main.c | 151 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 151 insertions(+)

diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c
index 6378ac5c7e37..4c2ee517832c 100644
--- a/drivers/bus/mhi/ep/main.c
+++ b/drivers/bus/mhi/ep/main.c
@@ -21,6 +21,7 @@
 
 static DEFINE_IDA(mhi_ep_cntrl_ida);
 
+static int mhi_ep_create_device(struct mhi_ep_cntrl *mhi_cntrl, u32 ch_id);
 static int mhi_ep_destroy_device(struct device *dev, void *data);
 
 static int mhi_ep_send_event(struct mhi_ep_cntrl *mhi_cntrl, u32 ring_idx,
@@ -185,6 +186,156 @@ void mhi_ep_unmap_free(struct mhi_ep_cntrl *mhi_cntrl, u64 pci_addr, phys_addr_t
 	mhi_cntrl->free_addr(mhi_cntrl, phys - offset, virt - offset, size);
 }
 
+int mhi_ep_process_cmd_ring(struct mhi_ep_ring *ring, struct mhi_ep_ring_element *el)
+{
+	struct mhi_ep_cntrl *mhi_cntrl = ring->mhi_cntrl;
+	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	struct mhi_result result = {};
+	struct mhi_ep_chan *mhi_chan;
+	struct mhi_ep_ring *ch_ring;
+	u32 tmp, ch_id;
+	int ret;
+
+	ch_id = MHI_TRE_GET_CMD_CHID(el);
+	mhi_chan = &mhi_cntrl->mhi_chan[ch_id];
+	ch_ring = &mhi_cntrl->mhi_chan[ch_id].ring;
+
+	switch (MHI_TRE_GET_CMD_TYPE(el)) {
+	case MHI_PKT_TYPE_START_CHAN_CMD:
+		dev_dbg(dev, "Received START command for channel (%d)\n", ch_id);
+
+		mutex_lock(&mhi_chan->lock);
+		/* Initialize and configure the corresponding channel ring */
+		if (!ch_ring->started) {
+			ret = mhi_ep_ring_start(mhi_cntrl, ch_ring,
+				(union mhi_ep_ring_ctx *)&mhi_cntrl->ch_ctx_cache[ch_id]);
+			if (ret) {
+				dev_err(dev, "Failed to start ring for channel (%d)\n", ch_id);
+				ret = mhi_ep_send_cmd_comp_event(mhi_cntrl,
+							MHI_EV_CC_UNDEFINED_ERR);
+				if (ret)
+					dev_err(dev, "Error sending completion event (%d)\n",
+						MHI_EV_CC_UNDEFINED_ERR);
+
+				goto err_unlock;
+			}
+		}
+
+		/* Enable DB for the channel */
+		mhi_ep_mmio_enable_chdb_a7(mhi_cntrl, ch_id);
+
+		/* Set channel state to RUNNING */
+		mhi_chan->state = MHI_CH_STATE_RUNNING;
+		tmp = le32_to_cpu(mhi_cntrl->ch_ctx_cache[ch_id].chcfg);
+		tmp &= ~CHAN_CTX_CHSTATE_MASK;
+		tmp |= FIELD_PREP(CHAN_CTX_CHSTATE_MASK, MHI_CH_STATE_RUNNING);
+		mhi_cntrl->ch_ctx_cache[ch_id].chcfg = cpu_to_le32(tmp);
+
+		ret = mhi_ep_send_cmd_comp_event(mhi_cntrl, MHI_EV_CC_SUCCESS);
+		if (ret) {
+			dev_err(dev, "Error sending command completion event (%d)\n",
+				MHI_EV_CC_SUCCESS);
+			goto err_unlock;
+		}
+
+		mutex_unlock(&mhi_chan->lock);
+
+		/*
+		 * Create MHI device only during UL channel start. Since the MHI
+		 * channels operate in a pair, we'll associate both UL and DL
+		 * channels to the same device.
+		 *
+		 * We also need to check for mhi_dev != NULL because, the host
+		 * will issue START_CHAN command during resume and we don't
+		 * destroy the device during suspend.
+		 */
+		if (!(ch_id % 2) && !mhi_chan->mhi_dev) {
+			ret = mhi_ep_create_device(mhi_cntrl, ch_id);
+			if (ret) {
+				dev_err(dev, "Error creating device for channel (%d)\n", ch_id);
+				return ret;
+			}
+		}
+
+		break;
+	case MHI_PKT_TYPE_STOP_CHAN_CMD:
+		dev_dbg(dev, "Received STOP command for channel (%d)\n", ch_id);
+		if (!ch_ring->started) {
+			dev_err(dev, "Channel (%d) not opened\n", ch_id);
+			return -ENODEV;
+		}
+
+		mutex_lock(&mhi_chan->lock);
+		/* Disable DB for the channel */
+		mhi_ep_mmio_disable_chdb_a7(mhi_cntrl, ch_id);
+
+		/* Send channel disconnect status to client drivers */
+		result.transaction_status = -ENOTCONN;
+		result.bytes_xferd = 0;
+		mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+
+		/* Set channel state to STOP */
+		mhi_chan->state = MHI_CH_STATE_STOP;
+		tmp = le32_to_cpu(mhi_cntrl->ch_ctx_cache[ch_id].chcfg);
+		tmp &= ~CHAN_CTX_CHSTATE_MASK;
+		tmp |= FIELD_PREP(CHAN_CTX_CHSTATE_MASK, MHI_CH_STATE_STOP);
+		mhi_cntrl->ch_ctx_cache[ch_id].chcfg = cpu_to_le32(tmp);
+
+		ret = mhi_ep_send_cmd_comp_event(mhi_cntrl, MHI_EV_CC_SUCCESS);
+		if (ret) {
+			dev_err(dev, "Error sending command completion event (%d)\n",
+				MHI_EV_CC_SUCCESS);
+			goto err_unlock;
+		}
+
+		mutex_unlock(&mhi_chan->lock);
+		break;
+	case MHI_PKT_TYPE_RESET_CHAN_CMD:
+		dev_dbg(dev, "Received STOP command for channel (%d)\n", ch_id);
+		if (!ch_ring->started) {
+			dev_err(dev, "Channel (%d) not opened\n", ch_id);
+			return -ENODEV;
+		}
+
+		mutex_lock(&mhi_chan->lock);
+		/* Stop and reset the transfer ring */
+		mhi_ep_ring_reset(mhi_cntrl, ch_ring);
+
+		/* Send channel disconnect status to client driver */
+		result.transaction_status = -ENOTCONN;
+		result.bytes_xferd = 0;
+		mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
+
+		/* Set channel state to DISABLED */
+		mhi_chan->state = MHI_CH_STATE_DISABLED;
+		tmp = le32_to_cpu(mhi_cntrl->ch_ctx_cache[ch_id].chcfg);
+		tmp &= ~CHAN_CTX_CHSTATE_MASK;
+		tmp |= FIELD_PREP(CHAN_CTX_CHSTATE_MASK, MHI_CH_STATE_DISABLED);
+		mhi_cntrl->ch_ctx_cache[ch_id].chcfg = cpu_to_le32(tmp);
+
+		ret = mhi_ep_send_cmd_comp_event(mhi_cntrl, MHI_EV_CC_SUCCESS);
+		if (ret) {
+			dev_err(dev, "Error sending command completion event (%d)\n",
+				MHI_EV_CC_SUCCESS);
+			goto err_unlock;
+		}
+
+		mutex_unlock(&mhi_chan->lock);
+		break;
+	default:
+		dev_err(dev, "Invalid command received: %d for channel (%d)\n",
+			MHI_TRE_GET_CMD_TYPE(el), ch_id);
+		return -EINVAL;
+	}
+
+	return 0;
+
+err_unlock:
+	mutex_unlock(&mhi_chan->lock);
+
+	return ret;
+}
+
 static int mhi_ep_cache_host_cfg(struct mhi_ep_cntrl *mhi_cntrl)
 {
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
-- 
2.25.1