Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
To:     agross@kernel.org, bjorn.andersson@linaro.org, robh+dt@kernel.org
Cc:     linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, msavaliy@qti.qualcomm.com,
        Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Subject: [PATCH] arm64: dts: qcom: sc7280: Configure cts sleep pinctrl to bias-disable for sc7280-idp
Date:   Mon, 14 Feb 2022 18:33:48 +0530
Message-Id: <1644843828-20464-1-git-send-email-quic_vnivarth@quicinc.com>
Precedence: bulk

WLAN rail was leaking power during RBSC/sleep even after turning BT off.
Change sleep pinctrl configuration to handle same.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71..de18319 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -516,10 +516,10 @@
 		pins = "gpio28";
 		function = "gpio";
 		/*
-		 * Configure a pull-down on CTS to match the pull of
-		 * the Bluetooth module.
+		 * Configure a disable on CTS to lower power usage
+		 * when BT is turned off.
 		 */
-		bias-pull-down;
+		bias-disable;
 	};
 
 	qup_uart7_sleep_rts: qup-uart7-sleep-rts {
-- 
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by the Linux Foundation.