Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To:     <agross@kernel.org>, <bjorn.andersson@linaro.org>,
        <lgirdwood@gmail.com>, <broonie@kernel.org>, <robh+dt@kernel.org>,
        <quic_plai@quicinc.com>, <bgoswami@codeaurora.org>,
        <perex@perex.cz>, <tiwai@suse.com>,
        <srinivas.kandagatla@linaro.org>, <rohitkr@codeaurora.org>,
        <linux-arm-msm@vger.kernel.org>, <alsa-devel@alsa-project.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <swboyd@chromium.org>, <judyhsiao@chromium.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        <linux-gpio@vger.kernel.org>
CC:     Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
        "Venkata Prasad Potturu" <quic_potturu@quicinc.com>
Subject: [PATCH v6 2/7] dt-bindings: pinctrl: qcom: Add sc7280 lpass lpi pinctrl bindings
Date:   Mon, 14 Feb 2022 20:49:49 +0530
Message-ID: <1644851994-22732-3-git-send-email-quic_srivasam@quicinc.com>
In-Reply-To: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com>
References: <1644851994-22732-1-git-send-email-quic_srivasam@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Add device tree binding Documentation details for Qualcomm SC7280
LPASS LPI pinctrl driver.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml     | 115 +++++++++++++++++++++
 1 file changed, 115 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000..d32ee32
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sc7280-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+  Low Power Island (LPI) TLMM block
+
+maintainers:
+  - Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+  compatible:
+    const: qcom,sc7280-lpass-lpi-pinctrl
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9])$"
+        minItems: 1
+        maxItems: 15
+
+      function:
+        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+                dmic3_data, i2s2_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+            0: No adjustments
+            1: Higher Slew rate (faster edges)
+            2: Lower Slew rate (slower edges)
+            3: Reserved (No adjustments)
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    lpass_tlmm: pinctrl@33c0000 {
+        compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+        reg = <0x33c0000 0x20000>,
+              <0x3550000 0x10000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpass_tlmm 0 0 15>;
+    };
-- 
2.7.4