Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
Message-ID: <8e42cb99-a442-062a-cf0a-2f8d8aff0ab3@foss.st.com>
Date:   Mon, 14 Feb 2022 11:02:22 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.5.0
Subject: Re: [PATCH 00/16] STM32 configure UART nodes for DMA
Content-Language: en-US
To:     Erwan Le Ray <erwan.leray@foss.st.com>
CC:     Rob Herring <robh+dt@kernel.org>,
        Maxime Coquelin <mcoquelin.stm32@gmail.com>,
        Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
        Marek Vasut <marex@denx.de>,
        Marcin Sloniewski <marcin.sloniewski@gmail.com>,
        Ahmad Fatoum <a.fatoum@pengutronix.de>,
        Jagan Teki <jagan@amarulasolutions.com>,
        <devicetree@vger.kernel.org>,
        <linux-stm32@st-md-mailman.stormreply.com>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
References: <20220203171114.10888-1-erwan.leray@foss.st.com>
From:   Alexandre TORGUE <alexandre.torgue@foss.st.com>
In-Reply-To: <20220203171114.10888-1-erwan.leray@foss.st.com>
Content-Type: text/plain; charset="UTF-8"; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 2/3/22 18:10, Erwan Le Ray wrote:
> Add DMA configuration to UART nodes in stm32mp15x (SOC level) and
> remove it at board level to keep current PIO behavior when needed.
> For stm32-ed1 and stm32-dkx boards, UART4 (console) and UART7
> (no HW flow control pin available) are kept in PIO mode, while USART3
> is now configured in DMA mode.
> UART4 (console UART) has to be kept in irq mode, as DMA support for
> console has been removed from the driver by commit e359b4411c28
> ("serial: stm32: fix threaded interrupt handling").
> 
> For other stm32mp15x-based boards, current configuration is kept for
> all UART instances.
> 
> Erwan Le Ray (16):
>    ARM: dts: stm32: add DMA configuration to UART nodes on stm32mp151
>    ARM: dts: stm32: keep uart4 behavior on stm32mp157c-ed1
>    ARM: dts: stm32: keep uart4 and uart7 behavior on stm32mp15xx-dkx
>    ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-ctouch2
>    ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-edimm2.2
>    ARM: dts: stm32: keep uart4 behavior on stm32mp157a-iot-box
>    ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0-of7
>    ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0
>    ARM: dts: stm32: keep uart nodes behavior on stm32mp157a-stinger96
>    ARM: dts: stm32: keep uart4 behavior on stm32mp157c-lxa-mc1
>    ARM: dts: stm32: keep uart4 behavior on stm32mp157c-odyssey
>    ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-drc02
>    ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-pdk2
>    ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-picoitx
>    ARM: dts: stm32: keep uart4 behavior on stm32mp15xx-dhcom-som
>    ARM: dts: stm32: keep uart nodes behavior on
>      stm32mp15xx-dhcor-avenger96
> 
>   arch/arm/boot/dts/stm32mp151.dtsi             | 21 +++++++++++++++++++
>   .../stm32mp157a-icore-stm32mp1-ctouch2.dts    |  2 ++
>   .../stm32mp157a-icore-stm32mp1-edimm2.2.dts   |  2 ++
>   arch/arm/boot/dts/stm32mp157a-iot-box.dts     |  2 ++
>   ...157a-microgea-stm32mp1-microdev2.0-of7.dts |  4 ++++
>   ...32mp157a-microgea-stm32mp1-microdev2.0.dts |  4 ++++
>   arch/arm/boot/dts/stm32mp157a-stinger96.dtsi  |  6 ++++++
>   arch/arm/boot/dts/stm32mp157c-ed1.dts         |  2 ++
>   arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts     |  2 ++
>   arch/arm/boot/dts/stm32mp157c-odyssey.dts     |  2 ++
>   .../arm/boot/dts/stm32mp15xx-dhcom-drc02.dtsi |  4 ++++
>   arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi |  4 ++++
>   .../boot/dts/stm32mp15xx-dhcom-picoitx.dtsi   |  4 ++++
>   arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi  |  2 ++
>   .../boot/dts/stm32mp15xx-dhcor-avenger96.dtsi |  6 ++++++
>   arch/arm/boot/dts/stm32mp15xx-dkx.dtsi        |  4 ++++
>   16 files changed, 71 insertions(+)
> 
Series applied on stm32-next.

Thanks
Alex