Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1750728AbXBNJdM (ORCPT ); Wed, 14 Feb 2007 04:33:12 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750800AbXBNJdM (ORCPT ); Wed, 14 Feb 2007 04:33:12 -0500 Received: from aibn55.astro.uni-bonn.de ([131.220.96.55]:44326 "EHLO aibn55.astro.uni-bonn.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750728AbXBNJdH (ORCPT ); Wed, 14 Feb 2007 04:33:07 -0500 X-Greylist: delayed 2124 seconds by postgrey-1.27 at vger.kernel.org; Wed, 14 Feb 2007 04:33:06 EST Message-ID: <45D2CEFC.4010900@astro.uni-bonn.de> Date: Wed, 14 Feb 2007 09:57:32 +0100 From: Manuel Metz User-Agent: Icedove 1.5.0.9 (X11/20061220) MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: Re: SATA ahci Bug in 2.6.19.x References: <7G2pJ-2iX-23@gated-at.bofh.it> <7G828-3zn-3@gated-at.bofh.it> <7HpWX-3D2-5@gated-at.bofh.it> <7Hrci-5ou-5@gated-at.bofh.it> <7HrP4-6t8-1@gated-at.bofh.it> <7Hvzs-3Tj-23@gated-at.bofh.it> <7IYJ1-281-27@gated-at.bofh.it> In-Reply-To: <7IYJ1-281-27@gated-at.bofh.it> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 70176 Lines: 1569 Stefan Priebe - FH wrote: > Hi! > > Any News? > > Stefan > > Stefan Priebe - FH schrieb: >> Hi! >> >> acpi=off does not help i've already tried that. >> >> >> Ok here some outputs: >> 1.) complete dmesg with 2.6.16.27 (works) >> >> Linux version 2.6.16.27amd (root@server275-han) (gcc version 3.3.5 >> (Debian 1:3.3.5-13)) #6 SMP Sat Aug 26 14:29:07 CEST 2006 >> BIOS-provided physical RAM map: >> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) >> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) >> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) >> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) >> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) >> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) >> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) >> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) >> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) >> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) >> ACPI: RSDP (v002 ACPIAM ) @ >> 0x00000000000fa850 >> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0100 >> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0290 >> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0390 >> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0400 >> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfbe040 >> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @ >> 0x0000000000000000 >> Scanning NUMA topology in Northbridge 24 >> Number of nodes 1 >> Node 0 MemBase 0000000000000000 Limit 000000003bfb0000 >> NUMA: Using 63 for the hash shift. >> Using node hash shift of 63 >> Bootmem setup node 0 0000000000000000-000000003bfb0000 >> On node 0 totalpages: 240991 >> DMA zone: 2709 pages, LIFO batch:0 >> DMA32 zone: 238282 pages, LIFO batch:31 >> Normal zone: 0 pages, LIFO batch:0 >> HighMem zone: 0 pages, LIFO batch:0 >> ACPI: PM-Timer IO Port: 0x808 >> ACPI: Local APIC address 0xfee00000 >> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> Processor #0 15:15 APIC version 16 >> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) >> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 >> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) >> IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) >> ACPI: IRQ0 used by override. >> ACPI: IRQ2 used by override. >> ACPI: IRQ9 used by override. >> Setting APIC routing to flat >> Using ACPI (MADT) for SMP configuration information >> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) >> Checking aperture... >> CPU 0: aperture @ f0000000 size 128 MB >> Built 1 zonelists >> Kernel command line: root=/dev/sda6 ro rootflags=quota Initializing CPU#0 >> PID hash table entries: 4096 (order: 12, 131072 bytes) >> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. >> time.c: Detected 2400.214 MHz processor. >> Console: colour VGA+ 80x25 >> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) >> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) >> Memory: 962212k/982720k available (2939k kernel code, 20120k reserved, >> 1327k data, 220k init) >> Calibrating delay using timer specific routine.. 4810.51 BogoMIPS >> (lpj=9621030) >> Mount-cache hash table entries: 256 >> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >> CPU: L2 Cache: 512K (64 bytes/line) >> CPU 0(1) -> Node 0 -> Core 0 >> Using local APIC timer interrupts. >> result 12501128 >> Detected 12.501 MHz APIC timer. >> Brought up 1 CPUs >> testing NMI watchdog ... OK. >> migration_cost=0 >> DMI 2.3 present. >> NET: Registered protocol family 16 >> ACPI: bus type pci registered >> PCI: Using configuration type 1 >> PCI: Using MMCONFIG at e0000000 >> ACPI: Subsystem revision 20060127 >> ACPI: Interpreter enabled >> ACPI: Using IOAPIC for interrupt routing >> ACPI: PCI Root Bridge [PCI0] (0000:00) >> PCI: Probing PCI hardware (bus 00) >> Boot video device is 0000:01:00.0 >> PCI: Transparent bridge - 0000:00:13.1 >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] >> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) >> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) >> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) >> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) >> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) >> Linux Plug and Play Support v0.97 (c) Adam Belay >> pnp: PnP ACPI init >> pnp: PnP ACPI: found 12 devices >> SCSI subsystem initialized >> PCI: Using ACPI for IRQ routing >> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post >> a report >> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 >> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 >> PCI-DMA: Disabling IOMMU. >> pnp: 00:06: ioport range 0x290-0x297 has been reserved >> PCI: Bridge: 0000:00:01.0 >> IO window: disabled. >> MEM window: faf00000-fbffffff >> PREFETCH window: d0000000-dfffffff >> PCI: Bridge: 0000:00:02.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:03.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:13.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:13.1 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Setting latency timer of device 0000:00:01.0 to 64 >> GSI 16 sharing vector 0xA9 and IRQ 16 >> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 >> PCI: Setting latency timer of device 0000:00:02.0 to 64 >> GSI 17 sharing vector 0xB1 and IRQ 17 >> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 >> PCI: Setting latency timer of device 0000:00:03.0 to 64 >> PCI: Setting latency timer of device 0000:00:13.0 to 64 >> PCI: Setting latency timer of device 0000:00:13.1 to 64 >> IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ >> VFS: Disk quotas dquot_6.5.1 >> Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >> Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >> SGI XFS with large block/inode numbers, no debug enabled >> SGI XFS Quota Management subsystem >> io scheduler noop registered >> io scheduler anticipatory registered (default) >> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 >> PCI: Setting latency timer of device 0000:00:02.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:02.0:pcie00] >> Allocate Port Service[0000:00:02.0:pcie01] >> Allocate Port Service[0000:00:02.0:pcie02] >> Allocate Port Service[0000:00:02.0:pcie03] >> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 >> PCI: Setting latency timer of device 0000:00:03.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:03.0:pcie00] >> Allocate Port Service[0000:00:03.0:pcie01] >> Allocate Port Service[0000:00:03.0:pcie02] >> Allocate Port Service[0000:00:03.0:pcie03] >> ACPI: CPU0 (power states: C1[C1] C2[C2]) >> ACPI: Processor [CPU1] (supports 16 throttling states) >> Real Time Clock Driver v1.12ac >> Linux agpgart interface v0.101 (c) Dave Jones >> PNP: No PS/2 controller found. Probing ports directly. >> serio: i8042 AUX port at 0x60,0x64 irq 12 >> serio: i8042 KBD port at 0x60,0x64 irq 1 >> isa bounce pool size: 16 pages >> floppy0: no floppy controllers found >> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize >> loop: loaded (max 8 devices) >> nbd: registered device at major 43 >> Intel(R) PRO/1000 Network Driver - version 6.3.9-k4 >> Copyright (c) 1999-2005 Intel Corporation. >> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI >> e100: Copyright(c) 1999-2005 Intel Corporation >> via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker >> GSI 18 sharing vector 0xD1 and IRQ 18 >> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209 >> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209. >> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link >> 45e1. >> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.49. >> netconsole: device eth0 not up yet, forcing it >> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 >> netconsole: carrier detect appears untrustworthy, waiting 4 seconds >> netconsole: network logging started >> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >> ide: Assuming 33MHz system bus speed for PIO modes; override with >> idebus=xx >> Probing IDE interface ide0... >> Probing IDE interface ide1... >> Adaptec aacraid driver (1.1-4 Aug 26 2006 14:27:50) >> megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) >> megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005) >> GDT-HA: Storage RAID Controller Driver. Version: 3.04 >> GDT-HA: Found 0 PCI Storage RAID Controllers >> 3ware Storage Controller device driver for Linux v1.26.02.001. >> 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. >> libata version 1.20 loaded. >> ahci 0000:00:0f.0: version 1.2 >> GSI 19 sharing vector 0xD9 and IRQ 19 >> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217 >> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE >> mode >> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part >> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225 >> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225 >> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225 >> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225 >> ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 >> 87:4023 88:40ff >> ata1: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48 >> ata1: dev 0 configured for UDMA/133 >> scsi0 : ahci >> ata2: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:bc01 >> 87:4023 88:40ff >> ata2: dev 0 ATA-7, max UDMA7, 312581808 sectors: LBA48 >> ata2: dev 0 configured for UDMA/133 >> scsi1 : ahci >> ata3: no device found (phy stat 00000000) >> scsi2 : ahci >> ata4: no device found (phy stat 00000000) >> scsi3 : ahci >> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 >> Type: Direct-Access ANSI SCSI revision: 05 >> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 >> Type: Direct-Access ANSI SCSI revision: 05 >> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) >> sda: Write Protect is off >> sda: Mode Sense: 00 3a 00 00 >> SCSI device sda: drive cache: write back >> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) >> sda: Write Protect is off >> sda: Mode Sense: 00 3a 00 00 >> SCSI device sda: drive cache: write back >> sda: sda1 < sda5 sda6 sda7 > >> sd 0:0:0:0: Attached scsi disk sda >> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) >> sdb: Write Protect is off >> sdb: Mode Sense: 00 3a 00 00 >> SCSI device sdb: drive cache: write back >> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) >> sdb: Write Protect is off >> sdb: Mode Sense: 00 3a 00 00 >> SCSI device sdb: drive cache: write back >> sdb: sdb1 < sdb5 sdb6 sdb7 > >> sd 1:0:0:0: Attached scsi disk sdb >> Fusion MPT base driver 3.03.07 >> Copyright (c) 1999-2005 LSI Logic Corporation >> Fusion MPT SPI Host driver 3.03.07 >> mice: PS/2 mouse device common for all mice >> NET: Registered protocol family 2 >> IP route cache hash table entries: 32768 (order: 6, 262144 bytes) >> TCP established hash table entries: 131072 (order: 9, 2097152 bytes) >> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >> TCP: Hash tables configured (established 131072 bind 65536) >> TCP reno registered >> TCP bic registered >> NET: Registered protocol family 1 >> NET: Registered protocol family 17 >> powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.60.0) >> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 (1400 mV) >> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 (1350 mV) >> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa (1300 mV) >> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc (1250 mV) >> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) >> cpu_init done, current fid 0x10, vid 0x6 >> XFS mounting filesystem sda6 >> Ending clean XFS mount for filesystem: sda6 >> VFS: Mounted root (xfs filesystem) readonly. >> Freeing unused kernel memory: 220k freed >> Adding 1349420k swap on /dev/sda7. Priority:-1 extents:1 across:1349420k >> >> >> >> 2.) complete dmesg output with 2.6.18.6 (works) >> Linux version 2.6.18.3amd (root@neuerserver) (gcc version 3.3.5 >> (Debian 1:3.3.5-13)) #2 SMP Wed Dec 20 14:26:51 CET 2006 >> BIOS-provided physical RAM map: >> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) >> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) >> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) >> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) >> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) >> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) >> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) >> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) >> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) >> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) >> DMI 2.3 present. >> ACPI: RSDP (v002 ACPIAM ) @ >> 0x00000000000fa850 >> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0100 >> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0290 >> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0390 >> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0400 >> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfbe040 >> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @ >> 0x0000000000000000 >> On node 0 totalpages: 240803 >> DMA zone: 2521 pages, LIFO batch:0 >> DMA32 zone: 238282 pages, LIFO batch:31 >> ACPI: PM-Timer IO Port: 0x808 >> ACPI: Local APIC address 0xfee00000 >> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> Processor #0 15:15 APIC version 16 >> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) >> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 >> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) >> IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) >> ACPI: IRQ0 used by override. >> ACPI: IRQ2 used by override. >> ACPI: IRQ9 used by override. >> Setting APIC routing to flat >> Using ACPI (MADT) for SMP configuration information >> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) >> Built 1 zonelists. Total pages: 240803 >> Kernel command line: nfs root=/dev/nfs >> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp >> BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64 >> Initializing CPU#0 >> PID hash table entries: 4096 (order: 12, 32768 bytes) >> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. >> time.c: Detected 2400.084 MHz processor. >> Console: colour VGA+ 80x25 >> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) >> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) >> Checking aperture... >> CPU 0: aperture @ f0000000 size 128 MB >> Memory: 961352k/982720k available (3487k kernel code, 20768k reserved, >> 1452k data, 228k init) >> Calibrating delay using timer specific routine.. 4804.44 BogoMIPS >> (lpj=9608882) >> Mount-cache hash table entries: 256 >> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >> CPU: L2 Cache: 512K (64 bytes/line) >> SMP alternatives: switching to UP code >> Freeing SMP alternatives: 28k freed >> ACPI: Core revision 20060707 >> Using local APIC timer interrupts. >> result 12500453 >> Detected 12.500 MHz APIC timer. >> Brought up 1 CPUs >> testing NMI watchdog ... OK. >> migration_cost=0 >> NET: Registered protocol family 16 >> ACPI: bus type pci registered >> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved >> PCI: Not using MMCONFIG. >> PCI: Using configuration type 1 >> ACPI: Interpreter enabled >> ACPI: Using IOAPIC for interrupt routing >> ACPI: PCI Root Bridge [PCI0] (0000:00) >> PCI: Probing PCI hardware (bus 00) >> Boot video device is 0000:01:00.0 >> PCI: Transparent bridge - 0000:00:13.1 >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] >> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) >> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) >> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) >> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) >> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) >> Linux Plug and Play Support v0.97 (c) Adam Belay >> pnp: PnP ACPI init >> pnp: PnP ACPI: found 12 devices >> SCSI subsystem initialized >> PCI: Using ACPI for IRQ routing >> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post >> a report >> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 >> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 >> PCI-DMA: Disabling IOMMU. >> pnp: 00:06: ioport range 0x290-0x297 has been reserved >> PCI: Bridge: 0000:00:01.0 >> IO window: disabled. >> MEM window: faf00000-fbffffff >> PREFETCH window: d0000000-dfffffff >> PCI: Bridge: 0000:00:02.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:03.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:13.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:13.1 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Setting latency timer of device 0000:00:01.0 to 64 >> GSI 16 sharing vector 0xA9 and IRQ 16 >> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 >> PCI: Setting latency timer of device 0000:00:02.0 to 64 >> GSI 17 sharing vector 0xB1 and IRQ 17 >> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 >> PCI: Setting latency timer of device 0000:00:03.0 to 64 >> PCI: Setting latency timer of device 0000:00:13.0 to 64 >> PCI: Setting latency timer of device 0000:00:13.1 to 64 >> NET: Registered protocol family 2 >> IP route cache hash table entries: 32768 (order: 6, 262144 bytes) >> TCP established hash table entries: 131072 (order: 9, 2097152 bytes) >> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >> TCP: Hash tables configured (established 131072 bind 65536) >> TCP reno registered >> VFS: Disk quotas dquot_6.5.1 >> Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >> Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >> SGI XFS with large block/inode numbers, no debug enabled >> SGI XFS Quota Management subsystem >> io scheduler noop registered >> io scheduler anticipatory registered >> io scheduler deadline registered >> io scheduler cfq registered (default) >> PCI: Setting latency timer of device 0000:00:02.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:02.0:pcie00] >> Allocate Port Service[0000:00:02.0:pcie02] >> PCI: Setting latency timer of device 0000:00:03.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:03.0:pcie00] >> Allocate Port Service[0000:00:03.0:pcie02] >> ACPI: CPU0 (power states: C1[C1] C2[C2]) >> ACPI: Processor [CPU1] (supports 16 throttling states) >> ACPI: Getting cpuindex for acpiid 0x2 >> Real Time Clock Driver v1.12ac >> Linux agpgart interface v0.101 (c) Dave Jones >> floppy0: no floppy controllers found >> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize >> loop: loaded (max 8 devices) >> nbd: registered device at major 43 >> Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 >> Copyright (c) 1999-2006 Intel Corporation. >> e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI >> e100: Copyright(c) 1999-2005 Intel Corporation >> via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker >> GSI 18 sharing vector 0xD1 and IRQ 18 >> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 209 >> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 209. >> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link >> 45e1. >> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56. >> netconsole: not configured, aborting >> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >> ide: Assuming 33MHz system bus speed for PIO modes; override with >> idebus=xx >> Probing IDE interface ide0... >> Probing IDE interface ide1... >> Adaptec aacraid driver (1.1-5[2409]-mh2) >> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) >> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) >> GDT-HA: Storage RAID Controller Driver. Version: 3.05 >> GDT-HA: Found 0 PCI Storage RAID Controllers >> 3ware Storage Controller device driver for Linux v1.26.02.001. >> 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. >> libata version 2.00 loaded. >> ahci 0000:00:0f.0: version 2.0 >> GSI 19 sharing vector 0xD9 and IRQ 19 >> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217 >> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE >> mode >> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part >> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 225 >> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 225 >> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 225 >> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 225 >> scsi0 : ahci >> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32) >> ata1.00: ata1: dev 0 multi count 16 >> ata1.00: configured for UDMA/133 >> scsi1 : ahci >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> ata2.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32) >> ata2.00: ata2: dev 0 multi count 16 >> ata2.00: configured for UDMA/133 >> scsi2 : ahci >> ata3: SATA link down (SStatus 0 SControl 300) >> scsi3 : ahci >> ata4: SATA link down (SStatus 0 SControl 300) >> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 >> Type: Direct-Access ANSI SCSI revision: 05 >> Vendor: ATA Model: SAMSUNG HD160JJ Rev: ZM10 >> Type: Direct-Access ANSI SCSI revision: 05 >> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) >> sda: Write Protect is off >> sda: Mode Sense: 00 3a 00 00 >> SCSI device sda: drive cache: write back >> SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) >> sda: Write Protect is off >> sda: Mode Sense: 00 3a 00 00 >> SCSI device sda: drive cache: write back >> sda: sda1 < sda5 sda6 sda7 > >> sd 0:0:0:0: Attached scsi disk sda >> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) >> sdb: Write Protect is off >> sdb: Mode Sense: 00 3a 00 00 >> SCSI device sdb: drive cache: write back >> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) >> sdb: Write Protect is off >> sdb: Mode Sense: 00 3a 00 00 >> SCSI device sdb: drive cache: write back >> sdb: sdb1 < sdb5 sdb6 sdb7 > >> sd 1:0:0:0: Attached scsi disk sdb >> Fusion MPT base driver 3.04.01 >> Copyright (c) 1999-2005 LSI Logic Corporation >> Fusion MPT SPI Host driver 3.04.01 >> PNP: No PS/2 controller found. Probing ports directly. >> serio: i8042 AUX port at 0x60,0x64 irq 12 >> serio: i8042 KBD port at 0x60,0x64 irq 1 >> mice: PS/2 mouse device common for all mice >> TCP bic registered >> NET: Registered protocol family 1 >> NET: Registered protocol family 17 >> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors >> (version 2.00.00) >> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 >> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 >> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa >> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc >> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 >> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 >> >> >> 3.) complete output (2.6.19.2) (with acpi does not work) >> >> BIOS-provided physical RAM map: >> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) >> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) >> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) >> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) >> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) >> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) >> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) >> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) >> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) >> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) >> Entering add_active_range(0, 0, 159) 0 entries of 256 used >> Entering add_active_range(0, 256, 245680) 1 entries of 256 used >> end_pfn_map = 1048576 >> DMI 2.3 present. >> ACPI: RSDP (v002 ACPIAM ) @ >> 0x00000000000fa850 >> ACPI: XSDT (v001 A M I OEMXSDT 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0100 >> ACPI: FADT (v003 A M I OEMFACP 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0290 >> ACPI: MADT (v001 A M I OEMAPIC 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0390 >> ACPI: MCFG (v001 A M I OEMMCFG 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfb0400 >> ACPI: OEMB (v001 A M I AMI_OEM 0x12000527 MSFT 0x00000097) @ >> 0x000000003bfbe040 >> ACPI: DSDT (v001 A0339 A0339000 0x00000000 INTL 0x02002026) @ >> 0x0000000000000000 >> Entering add_active_range(0, 0, 159) 0 entries of 256 used >> Entering add_active_range(0, 256, 245680) 1 entries of 256 used >> Zone PFN ranges: >> DMA 0 -> 4096 >> DMA32 4096 -> 1048576 >> Normal 1048576 -> 1048576 >> early_node_map[2] active PFN ranges >> 0: 0 -> 159 >> 0: 256 -> 245680 >> On node 0 totalpages: 245583 >> DMA zone: 56 pages used for memmap >> DMA zone: 1474 pages reserved >> DMA zone: 2469 pages, LIFO batch:0 >> DMA32 zone: 3302 pages used for memmap >> DMA32 zone: 238282 pages, LIFO batch:31 >> Normal zone: 0 pages used for memmap >> ACPI: PM-Timer IO Port: 0x808 >> ACPI: Local APIC address 0xfee00000 >> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> Processor #0 (Bootup-CPU) >> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) >> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >> IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 >> ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) >> IOAPIC[1]: apic_id 2, address 0xfecc0000, GSI 24-47 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) >> ACPI: IRQ0 used by override. >> ACPI: IRQ2 used by override. >> ACPI: IRQ9 used by override. >> Setting APIC routing to flat >> Using ACPI (MADT) for SMP configuration information >> Nosave address range: 000000000009f000 - 00000000000a0000 >> Nosave address range: 00000000000a0000 - 00000000000e4000 >> Nosave address range: 00000000000e4000 - 0000000000100000 >> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) >> PERCPU: Allocating 36352 bytes of per cpu data >> Built 1 zonelists. Total pages: 240751 >> Kernel command line: nfs root=/dev/nfs >> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp >> BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64 >> Initializing CPU#0 >> PID hash table entries: 4096 (order: 12, 32768 bytes) >> Console: colour VGA+ 80x25 >> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) >> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) >> Checking aperture... >> CPU 0: aperture @ f0000000 size 128 MB >> Memory: 961140k/982720k available (3530k kernel code, 20980k reserved, >> 1474k data, 264k init) >> Calibrating delay using timer specific routine.. 4804.06 BogoMIPS >> (lpj=9608139) >> Mount-cache hash table entries: 256 >> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >> CPU: L2 Cache: 512K (64 bytes/line) >> SMP alternatives: switching to UP code >> Freeing SMP alternatives: 32k freed >> ACPI: Core revision 20060707 >> Using local APIC timer interrupts. >> result 12501046 >> Detected 12.501 MHz APIC timer. >> Brought up 1 CPUs >> testing NMI watchdog ... OK. >> time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. >> time.c: Detected 2400.198 MHz processor. >> NET: Registered protocol family 16 >> ACPI: bus type pci registered >> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved >> PCI: Not using MMCONFIG. >> PCI: Using configuration type 1 >> ACPI: Interpreter enabled >> ACPI: Using IOAPIC for interrupt routing >> ACPI: PCI Root Bridge [PCI0] (0000:00) >> PCI: Probing PCI hardware (bus 00) >> Boot video device is 0000:01:00.0 >> PCI: Transparent bridge - 0000:00:13.1 >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] >> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] >> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) >> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) >> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) >> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) >> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, >> disabled. >> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) >> Linux Plug and Play Support v0.97 (c) Adam Belay >> pnp: PnP ACPI init >> pnp: PnP ACPI: found 12 devices >> SCSI subsystem initialized >> libata version 2.00 loaded. >> PCI: Using ACPI for IRQ routing >> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post >> a report >> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 >> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 >> PCI: Cannot allocate resource region 0 of device 0000:00:00.0 >> PCI-DMA: Disabling IOMMU. >> pnp: 00:06: ioport range 0x290-0x297 has been reserved >> PCI: Bridge: 0000:00:01.0 >> IO window: disabled. >> MEM window: faf00000-fbffffff >> PREFETCH window: d0000000-dfffffff >> PCI: Bridge: 0000:00:02.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:03.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:13.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:13.1 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Setting latency timer of device 0000:00:01.0 to 64 >> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27 >> PCI: Setting latency timer of device 0000:00:02.0 to 64 >> ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 31 >> PCI: Setting latency timer of device 0000:00:03.0 to 64 >> PCI: Setting latency timer of device 0000:00:13.0 to 64 >> PCI: Setting latency timer of device 0000:00:13.1 to 64 >> NET: Registered protocol family 2 >> IP route cache hash table entries: 32768 (order: 6, 262144 bytes) >> TCP established hash table entries: 131072 (order: 9, 2097152 bytes) >> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >> TCP: Hash tables configured (established 131072 bind 65536) >> TCP reno registered >> VFS: Disk quotas dquot_6.5.1 >> Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >> Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >> SGI XFS with large block/inode numbers, no debug enabled >> SGI XFS Quota Management subsystem >> io scheduler noop registered >> io scheduler anticipatory registered >> io scheduler deadline registered >> io scheduler cfq registered (default) >> PCI: Setting latency timer of device 0000:00:02.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:02.0:pcie00] >> Allocate Port Service[0000:00:02.0:pcie02] >> PCI: Setting latency timer of device 0000:00:03.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:03.0:pcie00] >> Allocate Port Service[0000:00:03.0:pcie02] >> ACPI: CPU0 (power states: C1[C1] C2[C2]) >> ACPI: Processor [CPU1] (supports 16 throttling states) >> ACPI: Getting cpuindex for acpiid 0x2 >> Real Time Clock Driver v1.12ac >> Linux agpgart interface v0.101 (c) Dave Jones >> floppy0: no floppy controllers found >> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize >> loop: loaded (max 8 devices) >> nbd: registered device at major 43 >> Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 >> Copyright (c) 1999-2006 Intel Corporation. >> e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI >> e100: Copyright(c) 1999-2006 Intel Corporation >> via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker >> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23 >> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23. >> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link >> 45e1. >> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. >> netconsole: not configured, aborting >> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >> ide: Assuming 33MHz system bus speed for PIO modes; override with >> idebus=xx >> Probing IDE interface ide0... >> Probing IDE interface ide1... >> Adaptec aacraid driver (1.1-5[2409]-mh2) >> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) >> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) >> GDT-HA: Storage RAID Controller Driver. Version: 3.05 >> GDT-HA: Found 0 PCI Storage RAID Controllers >> 3ware Storage Controller device driver for Linux v1.26.02.001. >> 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. >> ahci 0000:00:0f.0: version 2.0 >> ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21 >> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE >> mode >> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part >> ata1: SATA max UDMA/133 cmd 0xFFFFC20000004D00 ctl 0x0 bmdma 0x0 irq 1277 >> ata2: SATA max UDMA/133 cmd 0xFFFFC20000004D80 ctl 0x0 bmdma 0x0 irq 1277 >> ata3: SATA max UDMA/133 cmd 0xFFFFC20000004E00 ctl 0x0 bmdma 0x0 irq 1277 >> ata4: SATA max UDMA/133 cmd 0xFFFFC20000004E80 ctl 0x0 bmdma 0x0 irq 1277 >> scsi0 : ahci >> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> APIC error on CPU0: 04(08) >> ata1.00: qc timeout (cmd 0xec) >> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x104) >> ata1: port is slow to respond, please be patient (Status 0x80) >> ata1: port failed to respond (30 secs, Status 0x80) >> ata1: COMRESET failed (device not ready) >> ata1: hardreset failed, retrying in 5 secs >> ata1: port is slow to respond, please be patient (Status 0x80) >> ata1: port failed to respond (30 secs, Status 0x80) >> ata1: COMRESET failed (device not ready) >> ata1: hardreset failed, retrying in 5 secs >> ata1: port is slow to respond, please be patient (Status 0x80) >> ata1: port failed to respond (30 secs, Status 0x80) >> ata1: COMRESET failed (device not ready) >> ata1: reset failed, giving up >> scsi1 : ahci >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> APIC error on CPU0: 08(08) >> ata2.00: qc timeout (cmd 0xec) >> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) >> ata2: port is slow to respond, please be patient (Status 0x80) >> ata2: port failed to respond (30 secs, Status 0x80) >> ata2: COMRESET failed (device not ready) >> ata2: hardreset failed, retrying in 5 secs >> ata2: port is slow to respond, please be patient (Status 0x80) >> ata2: port failed to respond (30 secs, Status 0x80) >> ata2: COMRESET failed (device not ready) >> ata2: hardreset failed, retrying in 5 secs >> ata2: port is slow to respond, please be patient (Status 0x80) >> ata2: port failed to respond (30 secs, Status 0x80) >> ata2: COMRESET failed (device not ready) >> ata2: reset failed, giving up >> scsi2 : ahci >> ata3: SATA link down (SStatus 0 SControl 300) >> scsi3 : ahci >> ata4: SATA link down (SStatus 0 SControl 300) >> Fusion MPT base driver 3.04.02 >> Copyright (c) 1999-2005 LSI Logic Corporation >> Fusion MPT SPI Host driver 3.04.02 >> PNP: No PS/2 controller found. Probing ports directly. >> serio: i8042 KBD port at 0x60,0x64 irq 1 >> serio: i8042 AUX port at 0x60,0x64 irq 12 >> mice: PS/2 mouse device common for all mice >> TCP cubic registered >> NET: Registered protocol family 1 >> NET: Registered protocol family 17 >> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors >> (version 2.00.00) >> powernow-k8: 0 : fid 0x10 (2400 MHz), vid 0x6 >> powernow-k8: 1 : fid 0xe (2200 MHz), vid 0x8 >> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa >> powernow-k8: 3 : fid 0xa (1800 MHz), vid 0xc >> powernow-k8: 4 : fid 0x2 (1000 MHz), vid 0x12 >> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 >> Sending DHCP requests ., OK >> IP-Config: Got DHCP answer from 85.158.176.245, my address is >> 85.158.176.246 >> IP-Config: Complete: >> device=eth0, addr=85.158.176.246, mask=255.255.255.0, >> gw=85.158.176.1, >> host=85.158.176.246, domain=, nis-domain=(none), >> bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath= >> Looking up port of RPC 100003/2 on 85.158.176.245 >> Looking up port of RPC 100005/1 on 85.158.176.245 >> VFS: Mounted root (nfs filesystem) readonly. >> Freeing unused kernel memory: 264k freed >> >> >> >> 4.) complete output (2.6.19.2) (acpi=off does not work) >> BIOS-provided physical RAM map: >> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) >> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) >> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) >> BIOS-e820: 0000000000100000 - 000000003bfb0000 (usable) >> BIOS-e820: 000000003bfb0000 - 000000003bfbe000 (ACPI data) >> BIOS-e820: 000000003bfbe000 - 000000003bfe0000 (ACPI NVS) >> BIOS-e820: 000000003bfe0000 - 000000003c000000 (reserved) >> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) >> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) >> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) >> Entering add_active_range(0, 0, 159) 0 entries of 256 used >> Entering add_active_range(0, 256, 245680) 1 entries of 256 used >> end_pfn_map = 1048576 >> DMI 2.3 present. >> Entering add_active_range(0, 0, 159) 0 entries of 256 used >> Entering add_active_range(0, 256, 245680) 1 entries of 256 used >> Zone PFN ranges: >> DMA 0 -> 4096 >> DMA32 4096 -> 1048576 >> Normal 1048576 -> 1048576 >> early_node_map[2] active PFN ranges >> 0: 0 -> 159 >> 0: 256 -> 245680 >> On node 0 totalpages: 245583 >> DMA zone: 56 pages used for memmap >> DMA zone: 1474 pages reserved >> DMA zone: 2469 pages, LIFO batch:0 >> DMA32 zone: 3302 pages used for memmap >> DMA32 zone: 238282 pages, LIFO batch:31 >> Normal zone: 0 pages used for memmap >> Intel MultiProcessor Specification v1.1 >> MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID: MPTABLE: APIC at: >> 0xFEE00000 >> Processor #0 (Bootup-CPU) >> I/O APIC #1 at 0xFEC00000. >> I/O APIC #2 at 0xFECC0000. >> Setting APIC routing to flat >> Processors: 1 >> Nosave address range: 000000000009f000 - 00000000000a0000 >> Nosave address range: 00000000000a0000 - 00000000000e4000 >> Nosave address range: 00000000000e4000 - 0000000000100000 >> Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000) >> PERCPU: Allocating 36352 bytes of per cpu data >> Built 1 zonelists. Total pages: 240751 >> Kernel command line: nfs root=/dev/nfs >> nfsroot=85.158.176.245:/PXE/debian/rescue/debian-amd64 ip=dhcp >> acpi=off BOOT_IMAGE=debian/rescue/debian-amd64/boot/vmlinuz.amd64 >> Initializing CPU#0 >> PID hash table entries: 4096 (order: 12, 32768 bytes) >> Console: colour VGA+ 80x25 >> Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) >> Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) >> Checking aperture... >> CPU 0: aperture @ f0000000 size 128 MB >> Memory: 961140k/982720k available (3530k kernel code, 20980k reserved, >> 1474k data, 264k init) >> Calibrating delay using timer specific routine.. 4818.82 BogoMIPS >> (lpj=9637645) >> Mount-cache hash table entries: 256 >> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >> CPU: L2 Cache: 512K (64 bytes/line) >> SMP alternatives: switching to UP code >> Freeing SMP alternatives: 32k freed >> Using local APIC timer interrupts. >> result 12500751 >> Detected 12.500 MHz APIC timer. >> Brought up 1 CPUs >> testing NMI watchdog ... OK. >> time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer. >> time.c: Detected 2400.142 MHz processor. >> NET: Registered protocol family 16 >> PCI: Using configuration type 1 >> ACPI: Interpreter disabled. >> Linux Plug and Play Support v0.97 (c) Adam Belay >> pnp: PnP ACPI: disabled >> SCSI subsystem initialized >> libata version 2.00 loaded. >> PCI: Probing PCI hardware >> PCI: Probing PCI hardware (bus 00) >> Boot video device is 0000:01:00.0 >> PCI: Transparent bridge - 0000:00:13.1 >> PCI: Using IRQ router default [1106/3287] at 0000:00:11.0 >> PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 27 >> PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 31 >> PCI->APIC IRQ transform: 0000:00:0f.0[B] -> IRQ 21 >> PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 20 >> PCI->APIC IRQ transform: 0000:00:10.1[C] -> IRQ 22 >> PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21 >> PCI->APIC IRQ transform: 0000:00:10.3[D] -> IRQ 23 >> PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 23 >> PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16 >> PCI: Cannot allocate resource region 8 of bridge 0000:00:02.0 >> PCI: Cannot allocate resource region 8 of bridge 0000:00:03.0 >> PCI: Cannot allocate resource region 0 of device 0000:00:00.0 >> PCI-DMA: Disabling IOMMU. >> PCI: Bridge: 0000:00:01.0 >> IO window: disabled. >> MEM window: faf00000-fbffffff >> PREFETCH window: d0000000-dfffffff >> PCI: Bridge: 0000:00:02.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:03.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:13.0 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Bridge: 0000:00:13.1 >> IO window: disabled. >> MEM window: disabled. >> PREFETCH window: disabled. >> PCI: Setting latency timer of device 0000:00:01.0 to 64 >> PCI: Setting latency timer of device 0000:00:02.0 to 64 >> PCI: Setting latency timer of device 0000:00:03.0 to 64 >> PCI: Setting latency timer of device 0000:00:13.0 to 64 >> PCI: Setting latency timer of device 0000:00:13.1 to 64 >> NET: Registered protocol family 2 >> IP route cache hash table entries: 32768 (order: 6, 262144 bytes) >> TCP established hash table entries: 131072 (order: 9, 2097152 bytes) >> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >> TCP: Hash tables configured (established 131072 bind 65536) >> TCP reno registered >> VFS: Disk quotas dquot_6.5.1 >> Dquot-cache hash table entries: 512 (order 0, 4096 bytes) >> Installing knfsd (copyright (C) 1996 okir@monad.swb.de). >> SGI XFS with large block/inode numbers, no debug enabled >> SGI XFS Quota Management subsystem >> io scheduler noop registered >> io scheduler anticipatory registered >> io scheduler deadline registered >> io scheduler cfq registered (default) >> PCI: Setting latency timer of device 0000:00:02.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:02.0:pcie00] >> Allocate Port Service[0000:00:02.0:pcie02] >> PCI: Setting latency timer of device 0000:00:03.0 to 64 >> assign_interrupt_mode Found MSI capability >> Allocate Port Service[0000:00:03.0:pcie00] >> Allocate Port Service[0000:00:03.0:pcie02] >> Real Time Clock Driver v1.12ac >> Linux agpgart interface v0.101 (c) Dave Jones >> floppy0: no floppy controllers found >> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize >> loop: loaded (max 8 devices) >> nbd: registered device at major 43 >> Intel(R) PRO/1000 Network Driver - version 7.2.9-k4 >> Copyright (c) 1999-2006 Intel Corporation. >> e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI >> e100: Copyright(c) 1999-2006 Intel Corporation >> via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker >> eth0: VIA Rhine II at 0x1b800, 00:17:31:13:19:f2, IRQ 23. >> eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link >> 45e1. >> forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57. >> netconsole: not configured, aborting >> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 >> ide: Assuming 33MHz system bus speed for PIO modes; override with >> idebus=xx >> Probing IDE interface ide0... >> Probing IDE interface ide1... >> Adaptec aacraid driver (1.1-5[2409]-mh2) >> megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) >> megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006) >> GDT-HA: Storage RAID Controller Driver. Version: 3.05 >> GDT-HA: Found 0 PCI Storage RAID Controllers >> 3ware Storage Controller device driver for Linux v1.26.02.001. >> 3ware 9000 Storage Controller device driver for Linux v2.26.02.008. >> ahci 0000:00:0f.0: version 2.0 >> ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE >> mode >> ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part >> ata1: SATA max UDMA/133 cmd 0xFFFFC20000000D00 ctl 0x0 bmdma 0x0 irq 1277 >> ata2: SATA max UDMA/133 cmd 0xFFFFC20000000D80 ctl 0x0 bmdma 0x0 irq 1277 >> ata3: SATA max UDMA/133 cmd 0xFFFFC20000000E00 ctl 0x0 bmdma 0x0 irq 1277 >> ata4: SATA max UDMA/133 cmd 0xFFFFC20000000E80 ctl 0x0 bmdma 0x0 irq 1277 >> scsi0 : ahci >> ata1: SATA link down (SStatus 601 SControl 300) >> scsi1 : ahci >> ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> APIC error on CPU0: 04(08) >> ata2.00: qc timeout (cmd 0xec) >> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x104) >> ata2: port is slow to respond, please be patient (Status 0x80) >> ata2: port failed to respond (30 secs, Status 0x80) >> ata2: COMRESET failed (device not ready) >> ata2: hardreset failed, retrying in 5 secs >> ata2: port is slow to respond, please be patient (Status 0x80) >> ata2: port failed to respond (30 secs, Status 0x80) >> ata2: COMRESET failed (device not ready) >> ata2: hardreset failed, retrying in 5 secs >> ata2: port is slow to respond, please be patient (Status 0x80) >> ata2: port failed to respond (30 secs, Status 0x80) >> ata2: COMRESET failed (device not ready) >> ata2: reset failed, giving up >> scsi2 : ahci >> ata3: SATA link down (SStatus 0 SControl 300) >> scsi3 : ahci >> ata4: SATA link down (SStatus 0 SControl 300) >> Fusion MPT base driver 3.04.02 >> Copyright (c) 1999-2005 LSI Logic Corporation >> Fusion MPT SPI Host driver 3.04.02 >> PNP: No PS/2 controller found. Probing ports directly. >> serio: i8042 KBD port at 0x60,0x64 irq 1 >> serio: i8042 AUX port at 0x60,0x64 irq 12 >> mice: PS/2 mouse device common for all mice >> TCP cubic registered >> NET: Registered protocol family 1 >> NET: Registered protocol family 17 >> powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors >> (version 2.00.00) >> powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 >> powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc >> powernow-k8: 2 : fid 0xc (2000 MHz), vid 0xa >> powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x8 >> powernow-k8: 4 : fid 0x10 (2400 MHz), vid 0x6 >> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 >> Sending DHCP requests ., OK >> IP-Config: Got DHCP answer from 85.158.176.245, my address is >> 85.158.176.246 >> IP-Config: Complete: >> device=eth0, addr=85.158.176.246, mask=255.255.255.0, >> gw=85.158.176.1, >> host=85.158.176.246, domain=, nis-domain=(none), >> bootserver=85.158.176.245, rootserver=85.158.176.245, rootpath= >> Looking up port of RPC 100003/2 on 85.158.176.245 >> Looking up port of RPC 100005/1 on 85.158.176.245 >> VFS: Mounted root (nfs filesystem) readonly. >> Freeing unused kernel memory: 264k freed >> >> >> Stefan >> >> Luming Yu schrieb: >>> On 1/26/07, Stephen Evanchik wrote: >>>> On 1/25/07, Luming Yu wrote: >>>> > From the log: >>>> > 2.6.18.3: >>>> > ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 217 >>>> > 2.6.20-rc5: >>>> > "ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ >>>> 21" >>>> > >>>> > Sounds like acpi interrupt configure problem. Please try acpi=off >>>> first. >>>> >>>> >>>> Still does not recognize the SATA device (and the machine fails to >>>> come up). I tested this with 2.6.19.2, 2.6.20-rc5 and -rc6 this >>>> evening. I am going to build a vanilla 2.6.18 and see if that still >>>> works as I am currently running an FC5 kernel. >>>> >>> Is there any difference in dmesg with acpi=off? >>> what is your sata driver? >> >> > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ Hi, I have recognized the same problem with an ASUS A8V-X. The error first occurred with the kernel version 2.6.19.X and with 2.6.20 I still have the same problem (see dems output below). I also tried different BIOS settings for the SATA controller: SATA and AHCI, but none worked. Could this be a problem with this specific board, the ASUS A8V series? Manuel Linux version 2.6.20 (root@aibn44) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #6 SMP Thu Feb 8 16:09:39 CET 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000007fed0000 end: 000000007ffd0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007ffd0000 size: 000000000000e000 end: 000000007ffde000 type: 3 copy_e820_map() start: 000000007ffde000 size: 0000000000022000 end: 0000000080000000 type: 4 copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data) BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 524240) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 524240 early_node_map[1] active PFN ranges 0: 0 -> 524240 On node 0 totalpages: 524240 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2303 pages used for memmap HighMem zone: 292561 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000fa970 ACPI: XSDT (v001 A M I OEMXSDT 0x02000615 MSFT 0x00000097) @ 0x7ffd0100 ACPI: FADT (v003 A M I OEMFACP 0x02000615 MSFT 0x00000097) @ 0x7ffd0290 ACPI: MADT (v001 A M I OEMAPIC 0x02000615 MSFT 0x00000097) @ 0x7ffd0390 ACPI: MCFG (v001 A M I OEMMCFG 0x02000615 MSFT 0x00000097) @ 0x7ffd03f0 ACPI: OEMB (v001 A M I AMI_OEM 0x02000615 MSFT 0x00000097) @ 0x7ffde040 ACPI: DSDT (v001 A0304 A0304001 0x00000001 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:11 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:11 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Detected 2000.180 MHz processor. Built 1 zonelists. Total pages: 520145 Kernel command line: root=/dev/sda1 ro apic=off mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2074160k/2096960k available (2947k kernel code, 21576k reserved, 843k data, 224k init, 1179456k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04ba000 - 0xc04f2000 ( 224 kB) .data : 0xc03e0ff5 - 0xc04b3f8c ( 843 kB) .text : 0xc0100000 - 0xc03e0ff5 (2947 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4002.44 BogoMIPS (lpj=8004891) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 15k freed ACPI: Core revision 20060707 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4000.47 BogoMIPS (lpj=8000951) CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 Total of 2 processors activated (8002.92 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization across 2 CPUs: CPU#0 had 237 usecs TSC skew, fixed it up. CPU#1 had -237 usecs TSC skew, fixed it up. Brought up 2 CPUs migration_cost=238 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on 0:0 PCI: No mmconfig possible on 0:1 PCI: No mmconfig possible on 0:f PCI: No mmconfig possible on 0:10 PCI: No mmconfig possible on 0:11 PCI: No mmconfig possible on 0:13 PCI: No mmconfig possible on 0:18 PCI: No mmconfig possible on 1:0 PCI: No mmconfig possible on 5:c Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fd800000-fe8fffff PREFETCH window: f9700000-fd6fffff PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: fe900000-fe9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: c000-cfff MEM window: fea00000-feafffff PREFETCH window: 88000000-880fffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:02:00.1 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with ACLs, no debug enabled io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU1] (supports 16 throttling states) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 64M @ 0xdc000000 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:05:0c.0[A] -> GSI 17 (level, low) -> IRQ 16 eth0: RTL8169s/8110s at 0xf8804c00, 00:11:6b:32:45:74, IRQ 16 pata_via 0000:00:0f.1: version 0.2.1 ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15 scsi0 : pata_via ata1.00: ATA-7, max UDMA/133, 240121728 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.01: ATA-7, max UDMA/133, 240121728 sectors: LBA ata1.01: ata1: dev 1 multi count 16 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi1 : pata_via ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5 SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5 SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 0:0:1:0: Attached scsi disk sdb sd 0:0:1:0: Attached scsi generic sg1 type 0 scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R1202 1026 PQ: 0 ANSI: 5 scsi 1:0:0:0: Attached scsi generic sg2 type 5 usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 17 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: debug port 1 ehci_hcd 0000:00:10.4: irq 17, io mem 0xfebff800 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 18 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 18, io base 0x0000e080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 17 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 19, io base 0x0000dc00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 20, io base 0x0000d880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice hub 4-2:1.0: USB hub found hub 4-2:1.0: 4 ports detected usb 4-2.1: new low speed USB device using uhci_hcd and address 3 usb 4-2.1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-2.1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input4 input: PC Speaker as /class/input/input5 Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 Starting balanced_irq Using IPI Shortcut mode Time: acpi_pm clocksource has been installed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 224k freed ahci 0000:00:0f.0: version 2.0 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 19 ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part ata3: SATA max UDMA/133 cmd 0xF8834D00 ctl 0x0 bmdma 0x0 irq 223 ata4: SATA max UDMA/133 cmd 0xF8834D80 ctl 0x0 bmdma 0x0 irq 223 ata5: SATA max UDMA/133 cmd 0xF8834E00 ctl 0x0 bmdma 0x0 irq 223 ata6: SATA max UDMA/133 cmd 0xF8834E80 ctl 0x0 bmdma 0x0 irq 223 scsi2 : ahci ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) APIC error on CPU0: 00(08) APIC error on CPU1: 00(08) ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) ata3.00: qc timeout (cmd 0xec) ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104) ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:01.0 to 64 EXT3 FS on sda1, internal journal it87: Found IT8712F chip at 0xd00, revision 7 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/