Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
Date:   Tue, 15 Feb 2022 22:14:42 +0100
From:   Andrew Lunn <andrew@lunn.ch>
To:     Pawel Dembicki <paweldembicki@gmail.com>
Cc:     Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
        Olof Johansson <olof@lixom.net>, soc@kernel.org,
        Gregory Clement <gregory.clement@bootlin.com>,
        Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
        Shawn Guo <shawnguo@kernel.org>,
        Sam Ravnborg <sam@ravnborg.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Corentin Labbe <clabbe@baylibre.com>,
        Oleksij Rempel <linux@rempel-privat.de>,
        Hao Fang <fanghao11@huawei.com>, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 2/2] ARM: dts: kirkwood: Add Ctera C-200 V1 board
Message-ID: <YgwXwmypfyJmlTWf@lunn.ch>
References: <20220215163926.894-1-paweldembicki@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220215163926.894-1-paweldembicki@gmail.com>
Precedence: bulk

On Tue, Feb 15, 2022 at 05:39:22PM +0100, Pawel Dembicki wrote:
> Ctera C200 V1 is kirkwood-based 2-Bay NAS.
> 
> Hardware:
>   - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
>   - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
>   - NAND Flash: 256MB (Samsung 216 K9F2G08U0C)
>   - Lan: 1x GBE (Marvell 88E1116R-NNC1)
>   - Storage: 2x SATA HDD 3.5" Slot
>   - USB: 2x USB 2.0 port
>   - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
>   - LEDs: 13x GPIO controlled
>   - Buttons: 2x GPIO controlled
> 
> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew