Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Michael Walle <michael@walle.cc>
To:     Richard Genoud <richard.genoud@gmail.com>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Jiri Slaby <jirislaby@kernel.org>,
        Nicolas Ferre <nicolas.ferre@microchip.com>,
        Alexandre Belloni <alexandre.belloni@bootlin.com>,
        Claudiu Beznea <claudiu.beznea@microchip.com>
Cc:     linux-serial@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org, Michael Walle <michael@walle.cc>
Subject: [PATCH v2] tty: serial: atmel: add earlycon support
Date:   Thu, 17 Feb 2022 10:46:20 +0100
Message-Id: <20220217094620.1148571-1-michael@walle.cc>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add early console support which relies on the bootloader for the
initialization of the UART.
Please note, that the compatibles are taken from at91-usart MFD
driver.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 drivers/tty/serial/Kconfig        |  1 +
 drivers/tty/serial/atmel_serial.c | 24 ++++++++++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 0e5ccb25bdb1..407a98ec0791 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -139,6 +139,7 @@ config SERIAL_ATMEL_CONSOLE
 	bool "Support for console on AT91 serial port"
 	depends on SERIAL_ATMEL=y
 	select SERIAL_CORE_CONSOLE
+	select SERIAL_EARLYCON
 	help
 	  Say Y here if you wish to use an on-chip UART on a Atmel
 	  AT91 processor as the system console (the system
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 2d09a89974a2..73d43919898d 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2673,6 +2673,30 @@ static struct console atmel_console = {
 	.data		= &atmel_uart,
 };
 
+static void atmel_serial_early_write(struct console *con, const char *s,
+				     unsigned int n)
+{
+	struct earlycon_device *dev = con->data;
+
+	uart_console_write(&dev->port, s, n, atmel_console_putchar);
+}
+
+static int __init atmel_early_console_setup(struct earlycon_device *device,
+					    const char *options)
+{
+	if (!device->port.membase)
+		return -ENODEV;
+
+	device->con->write = atmel_serial_early_write;
+
+	return 0;
+}
+
+OF_EARLYCON_DECLARE(atmel_serial, "atmel,at91rm9200-usart",
+		    atmel_early_console_setup);
+OF_EARLYCON_DECLARE(atmel_serial, "atmel,at91sam9260-usart",
+		    atmel_early_console_setup);
+
 #define ATMEL_CONSOLE_DEVICE	(&atmel_console)
 
 #else
-- 
2.30.2