Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Ansuel Smith <ansuelsmth@gmail.com>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Ansuel Smith <ansuelsmth@gmail.com>
Subject: [PATCH v2 01/18] ARM: dts: qcom: add multiple missing pin definition for ipq8064
Date:   Fri, 18 Feb 2022 01:29:39 +0100
Message-Id: <20220218002956.6590-2-ansuelsmth@gmail.com>
In-Reply-To: <20220218002956.6590-1-ansuelsmth@gmail.com>
References: <20220218002956.6590-1-ansuelsmth@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add missing definition for mdio0 pins used for gpio-bitbang driver,i2c4
pins and rgmii2 pins for ipq8064.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 34 +++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 11481313bdb6..cc6ca9013ab1 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -382,6 +382,15 @@ mux {
 				};
 			};
 
+			i2c4_pins: i2c4_pinmux {
+				mux {
+					pins = "gpio12", "gpio13";
+					function = "gsbi4";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
 			spi_pins: spi_pins {
 				mux {
 					pins = "gpio18", "gpio19", "gpio21";
@@ -424,6 +433,8 @@ mux {
 
 				pullups {
 					pins = "gpio39";
+					function = "nand";
+					drive-strength = <10>;
 					bias-pull-up;
 				};
 
@@ -431,9 +442,32 @@ hold {
 					pins = "gpio40", "gpio41", "gpio42",
 					       "gpio43", "gpio44", "gpio45",
 					       "gpio46", "gpio47";
+					function = "nand";
+					drive-strength = <10>;
 					bias-bus-hold;
 				};
 			};
+
+			mdio0_pins: mdio0_pins {
+				mux {
+					pins = "gpio0", "gpio1";
+					function = "mdio";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
+			rgmii2_pins: rgmii2_pins {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29",
+					       "gpio30", "gpio31", "gpio32",
+					       "gpio51", "gpio52", "gpio59",
+					       "gpio60", "gpio61", "gpio62";
+					function = "rgmii2";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
 		};
 
 		intc: interrupt-controller@2000000 {
-- 
2.34.1