Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Ansuel Smith <ansuelsmth@gmail.com>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Ansuel Smith <ansuelsmth@gmail.com>
Subject: [PATCH v2 06/18] ARM: dts: qcom: enable usb phy by default for ipq8064
Date:   Fri, 18 Feb 2022 01:29:44 +0100
Message-Id: <20220218002956.6590-7-ansuelsmth@gmail.com>
In-Reply-To: <20220218002956.6590-1-ansuelsmth@gmail.com>
References: <20220218002956.6590-1-ansuelsmth@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Enable usb phy by default. When the usb phy were pushed, half of them
were flagged as disabled by mistake. Fix this to correctly init dwc3
node on any ipq8064 based SoC.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 9d658fcc1f12..e247bf51df01 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1175,8 +1175,6 @@ hs_phy_0: phy@100f8800 {
 			clocks = <&gcc USB30_0_UTMI_CLK>;
 			clock-names = "ref";
 			#phy-cells = <0>;
-
-			status = "disabled";
 		};
 
 		ss_phy_0: phy@100f8830 {
@@ -1185,8 +1183,6 @@ ss_phy_0: phy@100f8830 {
 			clocks = <&gcc USB30_0_MASTER_CLK>;
 			clock-names = "ref";
 			#phy-cells = <0>;
-
-			status = "disabled";
 		};
 
 		usb3_0: usb3@100f8800 {
-- 
2.34.1