Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Oleksij Rempel <o.rempel@pengutronix.de>
To:     Woojung Huh <woojung.huh@microchip.com>,
        UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Jakub Kicinski <kuba@kernel.org>
Cc:     Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next v1 1/1] net: dsa: microchip: ksz9477: implement MTU configuration
Date:   Mon, 21 Feb 2022 09:43:28 +0100
Message-Id: <20220221084328.3661250-1-o.rempel@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

This chips supports two ways to configure max MTU size:
- by setting SW_LEGAL_PACKET_DISABLE bit: if this bit is 0 allowed packed size
  will be between 64 and bytes 1518. If this bit is 1, it will accept
  packets up to 2000 bytes.
- by setting SW_JUMBO_PACKET bit. If this bit is set, the chip will
  ignore SW_LEGAL_PACKET_DISABLE value and use REG_SW_MTU__2 register to
  configure MTU size.

Current driver has disabled SW_JUMBO_PACKET bit and activates
SW_LEGAL_PACKET_DISABLE. So the switch will pass all packets up to 2000 without
any way to configure it.

By providing port_change_mtu we are switch to SW_JUMBO_PACKET way and will
be able to configure MTU up to ~9000.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz9477.c     | 42 +++++++++++++++++++++++--
 drivers/net/dsa/microchip/ksz9477_reg.h |  4 +++
 drivers/net/dsa/microchip/ksz_common.h  |  1 +
 3 files changed, 45 insertions(+), 2 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 18ffc8ded7ee..ae5ce7e71d4c 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -11,6 +11,7 @@
 #include <linux/platform_data/microchip-ksz.h>
 #include <linux/phy.h>
 #include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
 #include <net/dsa.h>
 #include <net/switchdev.h>
 
@@ -182,6 +183,35 @@ static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
 			   bits, set ? bits : 0);
 }
 
+static int ksz9477_change_mtu(struct dsa_switch *ds, int port, int mtu)
+{
+	struct ksz_device *dev = ds->priv;
+	u16 new_mtu, max_mtu = 0;
+	int i;
+
+	new_mtu = mtu + ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN;
+
+	if (dsa_is_cpu_port(ds, port))
+		new_mtu += KSZ9477_INGRESS_TAG_LEN;
+
+	/* Cache the per-port MTU setting */
+	dev->ports[port].max_mtu = new_mtu;
+
+	for (i = 0; i < dev->port_cnt; i++) {
+		if (dev->ports[i].max_mtu > max_mtu)
+			max_mtu = dev->ports[i].max_mtu;
+	}
+
+	return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2,
+				  REG_SW_MTU_MASK, max_mtu);
+}
+
+static int ksz9477_max_mtu(struct dsa_switch *ds, int port)
+{
+	return KSZ9477_MAX_MTU - ETH_HLEN - ETH_FCS_LEN - VLAN_HLEN -
+		KSZ9477_INGRESS_TAG_LEN;
+}
+
 static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
 {
 	unsigned int val;
@@ -1412,8 +1442,14 @@ static int ksz9477_setup(struct dsa_switch *ds)
 	/* Do not work correctly with tail tagging. */
 	ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false);
 
-	/* accept packet up to 2000bytes */
-	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
+	/* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */
+	ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true);
+
+	/* Now we can configure default MTU value */
+	ret = regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, REG_SW_MTU_MASK,
+				 VLAN_ETH_FRAME_LEN + ETH_FCS_LEN);
+	if (ret)
+		return ret;
 
 	ksz9477_config_cpu_port(ds);
 
@@ -1460,6 +1496,8 @@ static const struct dsa_switch_ops ksz9477_switch_ops = {
 	.port_mirror_add	= ksz9477_port_mirror_add,
 	.port_mirror_del	= ksz9477_port_mirror_del,
 	.get_stats64		= ksz9477_get_stats64,
+	.port_change_mtu	= ksz9477_change_mtu,
+	.port_max_mtu		= ksz9477_max_mtu,
 };
 
 static u32 ksz9477_get_port_addr(int port, int offset)
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index 16939f29faa5..34c368d3676c 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -176,6 +176,7 @@
 #define REG_SW_MAC_ADDR_5		0x0307
 
 #define REG_SW_MTU__2			0x0308
+#define REG_SW_MTU_MASK			GENMASK(13, 0)
 
 #define REG_SW_ISP_TPID__2		0x030A
 
@@ -1662,4 +1663,7 @@
 /* 148,800 frames * 67 ms / 100 */
 #define BROADCAST_STORM_VALUE		9969
 
+#define KSZ9477_INGRESS_TAG_LEN		2
+#define KSZ9477_MAX_MTU			9000
+
 #endif /* KSZ9477_REGS_H */
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index c6fa487fb006..edf4a442de57 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -41,6 +41,7 @@ struct ksz_port {
 
 	struct ksz_port_mib mib;
 	phy_interface_t interface;
+	unsigned int max_mtu;
 };
 
 struct ksz_device {
-- 
2.30.2