Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 23 Feb 2022 22:15:06 -0600
From:   Bjorn Andersson <bjorn.andersson@linaro.org>
To:     Luca Weiss <luca@z3ntu.xyz>
Cc:     linux-arm-msm@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org,
        Linus Walleij <linus.walleij@linaro.org>,
        devicetree@vger.kernel.org, linux-bluetooth@vger.kernel.org,
        linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: Re: [PATCH 0/5] Wifi & Bluetooth on LG G Watch R
Message-ID: <YhcGSmd5M3W+fI6c@builder.lan>
References: <20220216212433.1373903-1-luca@z3ntu.xyz>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20220216212433.1373903-1-luca@z3ntu.xyz>
Precedence: bulk

On Wed 16 Feb 15:24 CST 2022, Luca Weiss wrote:

> This series adds the BCM43430A0 chip providing Bluetooth & Wifi on the
> LG G Watch R.
> 

I picked the dts changes, but would prefer that the other two changes
goes through the BT tree. I see that you haven't copied Marcel on the
dt-binding change though, so please resubmit those two patches together.

Thanks,
Bjorn

> Luca Weiss (5):
>   dt-bindings: bluetooth: broadcom: add BCM43430A0
>   Bluetooth: hci_bcm: add BCM43430A0
>   ARM: dts: qcom: msm8226: Add pinctrl for sdhci nodes
>   ARM: dts: qcom: apq8026-lg-lenok: Add Wifi
>   ARM: dts: qcom: apq8026-lg-lenok: Add Bluetooth
> 
>  .../bindings/net/broadcom-bluetooth.yaml      |  1 +
>  arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts   | 98 ++++++++++++++++---
>  arch/arm/boot/dts/qcom-msm8226.dtsi           | 57 +++++++++++
>  drivers/bluetooth/hci_bcm.c                   |  1 +
>  4 files changed, 144 insertions(+), 13 deletions(-)
> 
> -- 
> 2.35.1
>