Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Lukasz Luba <lukasz.luba@arm.com>
To:     linux-kernel@vger.kernel.org
Cc:     lukasz.luba@arm.com, dietmar.eggemann@arm.com,
        viresh.kumar@linaro.org, rafael@kernel.org,
        daniel.lezcano@linaro.org, nm@ti.com, sboyd@kernel.org,
        mka@chromium.org, dianders@chromium.org, robh+dt@kernel.org,
        devicetree@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH v3 1/4] dt-bindings: opp: Add "opp-microwatt" entry in the OPP
Date:   Thu, 24 Feb 2022 08:11:28 +0000
Message-Id: <20220224081131.27282-2-lukasz.luba@arm.com>
In-Reply-To: <20220224081131.27282-1-lukasz.luba@arm.com>
References: <20220224081131.27282-1-lukasz.luba@arm.com>
Precedence: bulk

Add new entry for the OPP which provides information about power
expressed in micro-Watts. It is useful for the Energy Model framework.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
---
 .../devicetree/bindings/opp/opp-v2-base.yaml      | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
index 15a76bcd6d42..433164186a98 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
@@ -93,6 +93,21 @@ patternProperties:
         minItems: 1
         maxItems: 8   # Should be enough regulators
 
+      opp-microwatt:
+        description: |
+          The power for the OPP in micro-Watts.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If current values aren't required
+          for a regulator, then it shall be filled with 0. If power values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
       opp-level:
         description:
           A value representing the performance level of the device.
-- 
2.17.1