Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1946709AbXBQNNx (ORCPT ); Sat, 17 Feb 2007 08:13:53 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1946712AbXBQNNx (ORCPT ); Sat, 17 Feb 2007 08:13:53 -0500 Received: from mail-in-01.arcor-online.net ([151.189.21.41]:44223 "EHLO mail-in-01.arcor-online.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1946709AbXBQNNw (ORCPT ); Sat, 17 Feb 2007 08:13:52 -0500 From: Prakash Punnoor To: Alan Subject: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen with pata_amd Date: Sat, 17 Feb 2007 14:13:44 +0100 User-Agent: KMail/1.9.6 Cc: linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Type: multipart/signed; boundary="nextPart2250388.KXAjGoq2DZ"; protocol="application/pgp-signature"; micalg=pgp-sha1 Content-Transfer-Encoding: 7bit Message-Id: <200702171413.47877.prakash@punnoor.de> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3915 Lines: 111 --nextPart2250388.KXAjGoq2DZ Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi, I tried a cat /dev/sdb1 >/dev/null from a Sandisk Extreme III CF card=20 connected via cf to IDE adapteer to onboard ide of nforce c51. I am usinf=20 2.6.20 on x86_64. For a few seconds it worked but then it dropped to pio4: ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata3.00: (BMDMA stat 0x65) ata3.00: cmd c8/00:80:1f:7d:01/00:00:00:00:00/e0 tag 0 cdb 0x0 data 65536 in res 58/00:00:9e:7d:01/00:00:00:00:00/e0 Emask 0x2 (HSM violation) ata3: soft resetting port ata3.00: simplex DMA is claimed by other device, disabling DMA ata3.00: configured for PIO4 ata3: EH complete SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support= =20 DPO or FUA While boot I get: sata_nv 0000:00:0e.0: version 3.2 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [APSI] -> GSI 22 (level, low) -= >=20 IRQ 22 PCI: Setting latency timer of device 0000:00:0e.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 22 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 22 scsi0 : sata_nv ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7, max UDMA/133, 586114704 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 1 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) ATA: abnormal status 0x7F on port 0x977 scsi 0:0:0:0: Direct-Access ATA Maxtor 7V300F0 VA11 PQ: 0 ANSI: 5 SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support= =20 DPO or FUA SCSI device sda: 586114704 512-byte hdwr sectors (300091 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support= =20 DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sda3 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 pata_amd 0000:00:0d.0: version 0.2.7 PCI: Setting latency timer of device 0000:00:0d.0 to 64 ata3: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF400 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xF408 irq 15 scsi2 : pata_amd ata3.00: CFA, max MWDMA2, 2001888 sectors: LBA ata3.00: ata3: dev 0 multi count 0 ata3.00: configured for MWDMA2 scsi3 : pata_amd ata4: port disabled. ignoring. ata4: reset failed, giving up scsi 2:0:0:0: Direct-Access ATA SanDisk SDCFX-10 HDX PQ: 0 ANSI: 5 SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support= =20 DPO or FUA SCSI device sdb: 2001888 512-byte hdwr sectors (1025 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support= =20 DPO or FUA sdb: sdb1 sd 2:0:0:0: Attached scsi removable disk sdb sd 2:0:0:0: Attached scsi generic sg1 type 0 =2D-=20 (=C2=B0=3D =3D=C2=B0) //\ Prakash Punnoor /\\ V_/ \_V --nextPart2250388.KXAjGoq2DZ Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.2 (GNU/Linux) iD8DBQBF1v+LxU2n/+9+t5gRAvQ5AJ9xaeqUEOfT0iv6ctkRdJLvRt7yLACgiv7w In8ihaYapv9t+gmrgVQsPxc= =zwvg -----END PGP SIGNATURE----- --nextPart2250388.KXAjGoq2DZ-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/