Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
From:   Rob Herring <robh@kernel.org>
To:     Bjorn Andersson <bjorn.andersson@linaro.org>
Cc:     linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
        Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
        Rob Herring <robh+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        Linus Walleij <linus.walleij@linaro.org>
In-Reply-To: <20220225053257.2479279-1-bjorn.andersson@linaro.org>
References: <20220225053257.2479279-1-bjorn.andersson@linaro.org>
Subject: Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add sc8280xp TLMM binding
Date:   Fri, 25 Feb 2022 08:16:07 -0600
Message-Id: <1645798567.343483.857894.nullmailer@robh.at.kernel.org>
Precedence: bulk

On Thu, 24 Feb 2022 21:32:56 -0800, Bjorn Andersson wrote:
> The Qualcomm SC8280XP platform contains a single block of registers
> for the TLMM block. This provides pinconf and pinmux for 228 GPIOs, 2
> UFS_RESET pins and one SDC interface.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>  .../pinctrl/qcom,sc8280xp-pinctrl.yaml        | 153 ++++++++++++++++++
>  1 file changed, 153 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-pinctrl.example.dt.yaml:0:0: /example-0/pinctrl@3100000: failed to match any schema with compatible: ['qcom,sc8280x-tlmm']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1597478

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.