Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Peter Geis <pgwipeout@gmail.com>
Cc:     linux-rockchip@lists.infradead.org, heiko@sntech.de,
        michael.riesch@wolfvision.net, jbx6244@gmail.com,
        Peter Geis <pgwipeout@gmail.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>,
        Felipe Balbi <balbi@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-usb@vger.kernel.org
Subject: [PATCH v4 0/8]  enable usb support on rk356x
Date:   Mon, 28 Feb 2022 08:56:51 -0500
Message-Id: <20220228135700.1089526-1-pgwipeout@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
To:     unlisted-recipients:; (no To-header on input)
Precedence: bulk

Good Morning,

This is my patch series that I have maintained out of tree until the
combophy driver landed.

Patch 1 fixes the grf dt binding from the combophy merge.
Patch 2 adds the dt bindings for the grf changes necessary.
Patch 3 adds the SoC specific binding.
Patch 4 adds support to the grf driver to set the rk3566 otg clock
source.
Patch 5 is a downstream patch ported forward to shut down the usb3 clock
when the controller is operating in usb2 mode.
Patch 6 adds the dwc3 nodes to the rk356x device tree includes.
Patch 7 enables the dwc3 nodes on the Quartz64 Model A.
Patch 8 enables the dwc3 nodes on the rk3568-evb.

Note, there are functional changes from previous versions.

Please review and apply.

Very Respectfully,
Peter Geis

Changelog:
v4:
- Add SoC specific binding, fall back to core.
 
v3:
- Drop the dwc-of-simple method in favor of using dwc core.
- Drop all quirks except snps,dis_u2_susphy_quirk, which is necessary to
  prevent device detection failures in some states.
- Drop the reset-names.

v2:
- Add a dt-bindings fix for grf.yaml
- Unify the reset names.
- Constrain the force usb2 clock dwc3 patch to only supported variants of
the ip.
- Change dwc3-of-simple to support of-match-data.
- Drop the PCLK-PIPE clk.
- Rename the usb nodes to be more friendly.
- Add the rk3568-evb enable patch.

Bin Yang (1):
  usb: dwc3: core: do not use 3.0 clock when operating in 2.0 mode

Michael Riesch (2):
  dt-bindings: usb: add rk3568 compatible to rockchip, dwc3
  arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10

Peter Geis (5):
  dt-bindings: soc: grf: fix rk3568 usb definitions
  dt-bindings: soc: grf: add rk3566-pipe-grf compatible
  soc: rockchip: set dwc3 clock for rk3566
  arm64: dts: rockchip: add rk356x dwc3 usb3 nodes
  arm64: dts: rockchip: enable dwc3 on quartz64-a

 .../devicetree/bindings/soc/rockchip/grf.yaml |  5 +-
 .../bindings/usb/rockchip,dwc3.yaml           |  2 +
 .../boot/dts/rockchip/rk3566-quartz64-a.dts   | 37 +++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3566.dtsi      | 11 +++++
 .../boot/dts/rockchip/rk3568-evb1-v10.dts     | 46 +++++++++++++++++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      |  9 ++++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 35 +++++++++++++-
 drivers/soc/rockchip/grf.c                    | 17 +++++++
 drivers/usb/dwc3/core.c                       |  5 ++
 drivers/usb/dwc3/core.h                       |  1 +
 10 files changed, 165 insertions(+), 3 deletions(-)

-- 
2.25.1