Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Brian Norris <briannorris@chromium.org>
To:     Andrzej Hajda <andrzej.hajda@intel.com>,
        Neil Armstrong <narmstrong@baylibre.com>,
        Robert Foss <robert.foss@linaro.org>,
        David Airlie <airlied@linux.ie>,
        Daniel Vetter <daniel@ffwll.ch>,
        Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
        Maxime Ripard <mripard@kernel.org>,
        Thomas Zimmermann <tzimmermann@suse.de>
Cc:     dri-devel@lists.freedesktop.org, Sean Paul <seanpaul@chromium.org>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Sean Paul <sean@poorly.run>,
        Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
        Jonas Karlman <jonas@kwiboo.se>,
        Heiko Stuebner <heiko@sntech.de>, linux-kernel@vger.kernel.org,
        Brian Norris <briannorris@chromium.org>,
        Liu Ying <victor.liu@oss.nxp.com>, stable@vger.kernel.org
Subject: [PATCH v2 2/2] drm/atomic: Force bridge self-refresh-exit on CRTC switch
Date:   Mon, 28 Feb 2022 12:25:32 -0800
Message-Id: <20220228122522.v2.2.Ic15a2ef69c540aee8732703103e2cff51fb9c399@changeid>
In-Reply-To: <20220228202532.869740-1-briannorris@chromium.org>
References: <20220228202532.869740-1-briannorris@chromium.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

It's possible to change which CRTC is in use for a given
connector/encoder/bridge while we're in self-refresh without fully
disabling the connector/encoder/bridge along the way. This can confuse
the bridge encoder/bridge, because
(a) it needs to track the SR state (trying to perform "active"
    operations while the panel is still in SR can be Bad(TM)); and
(b) it tracks the SR state via the CRTC state (and after the switch, the
    previous SR state is lost).

Thus, we need to either somehow carry the self-refresh state over to the
new CRTC, or else force an encoder/bridge self-refresh transition during
such a switch.

I choose the latter, so we disable the encoder (and exit PSR) before
attaching it to the new CRTC (where we can continue to assume a clean
(non-self-refresh) state).

This fixes PSR issues seen on Rockchip RK3399 systems with
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c.

Change in v2:

- Drop "->enable" condition; this could possibly be "->active" to
  reflect the intended hardware state, but it also is a little
  over-specific. We want to make a transition through "disabled" any
  time we're exiting PSR at the same time as a CRTC switch.
  (Thanks Liu Ying)

Cc: Liu Ying <victor.liu@oss.nxp.com>
Cc: <stable@vger.kernel.org>
Fixes: 1452c25b0e60 ("drm: Add helpers to kick off self refresh mode in drivers")
Signed-off-by: Brian Norris <briannorris@chromium.org>
---
 drivers/gpu/drm/drm_atomic_helper.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
index 9603193d2fa1..987e4b212e9f 100644
--- a/drivers/gpu/drm/drm_atomic_helper.c
+++ b/drivers/gpu/drm/drm_atomic_helper.c
@@ -1011,9 +1011,19 @@ crtc_needs_disable(struct drm_crtc_state *old_state,
 		return drm_atomic_crtc_effectively_active(old_state);
 
 	/*
-	 * We need to run through the crtc_funcs->disable() function if the CRTC
-	 * is currently on, if it's transitioning to self refresh mode, or if
-	 * it's in self refresh mode and needs to be fully disabled.
+	 * We need to disable bridge(s) and CRTC if we're transitioning out of
+	 * self-refresh and changing CRTCs at the same time, because the
+	 * bridge tracks self-refresh status via CRTC state.
+	 */
+	if (old_state->self_refresh_active &&
+	    old_state->crtc != new_state->crtc)
+		return true;
+
+	/*
+	 * We also need to run through the crtc_funcs->disable() function if
+	 * the CRTC is currently on, if it's transitioning to self refresh
+	 * mode, or if it's in self refresh mode and needs to be fully
+	 * disabled.
 	 */
 	return old_state->active ||
 	       (old_state->self_refresh_active && !new_state->active) ||
-- 
2.35.1.574.g5d30c73bfb-goog