Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <c6b0506a-24ed-d4fd-c74e-d95c6dca6fe6@linaro.org>
Date:   Tue, 1 Mar 2022 11:13:30 +0000
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101
 Thunderbird/91.5.0
Subject: Re: [PATCH v3 3/3] soundwire: qcom: add in-band wake up interrupt
 support
Content-Language: en-US
To:     Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>,
        robh+dt@kernel.org, vkoul@kernel.org,
        yung-chuan.liao@linux.intel.com
Cc:     devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
        linux-kernel@vger.kernel.org, quic_srivasam@quicinc.com
References: <20220228172528.3489-1-srinivas.kandagatla@linaro.org>
 <20220228172528.3489-4-srinivas.kandagatla@linaro.org>
 <28a7aa9b-8322-54df-1cfa-275805e2b044@linux.intel.com>
From:   Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
In-Reply-To: <28a7aa9b-8322-54df-1cfa-275805e2b044@linux.intel.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 28/02/2022 18:01, Pierre-Louis Bossart wrote:
> 
>> @@ -1424,6 +1464,11 @@ static int swrm_runtime_resume(struct device *dev)
>>   	struct qcom_swrm_ctrl *ctrl = dev_get_drvdata(dev);
>>   	int ret;
>>   
>> +	if (ctrl->wake_irq > 0) {
>> +		if (!irqd_irq_disabled(irq_get_irq_data(ctrl->wake_irq)))
>> +			disable_irq_nosync(ctrl->wake_irq);
>> +	}
>> +
>>   	clk_prepare_enable(ctrl->hclk);
> 
> This one is quite interesting. If you disable the IRQ mechanism but
> haven't yet resumed the clock, that leaves a time window where the
> peripheral could attempt to drive the line high. what happens in that case?


We did call pm_runtime_get_sync() from Wake IRQ handler, which means 
that resume should be finished as part of Wake IRQ handler. Any new 
Interrupt conditions/status generated by slave in the meantime will be 
cleared while handling SLAVE PEND interrupt.

> 
>>   
>>   	if (ctrl->clock_stop_not_supported) {
>> @@ -1491,6 +1536,11 @@ static int __maybe_unused swrm_runtime_suspend(struct device *dev)
>>   
>>   	usleep_range(300, 305);
>>   
>> +	if (ctrl->wake_irq > 0) {
>> +		if (irqd_irq_disabled(irq_get_irq_data(ctrl->wake_irq)))
>> +			enable_irq(ctrl->wake_irq);
>> +	}
>> +
> 
> and this one is similar, you could have a case where the peripheral
> signals a wake immediately after the ClockStopNow frame, but you may not
> yet have enabled the wake detection interrupt.
> 
> Would that imply that the wake is missed?
Its Possible it might be missed at that instance, however as the Slave 
interrupt source condition/status (Ex: button Press) is still not 
cleared it should generate a Wake interrupt as soon as its enabled.

--srini
> 
> 
> 
>>   	return 0;
>>   }
>>