Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932624AbXBSUhG (ORCPT ); Mon, 19 Feb 2007 15:37:06 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S932611AbXBSUhG (ORCPT ); Mon, 19 Feb 2007 15:37:06 -0500 Received: from khc.piap.pl ([195.187.100.11]:51677 "EHLO khc.piap.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932609AbXBSUhE (ORCPT ); Mon, 19 Feb 2007 15:37:04 -0500 To: Udo van den Heuvel Cc: linux-kernel@vger.kernel.org, Lennart Sorensen Subject: Re: PCI riser cards and PCI irq routing, etc References: <45D85DA1.7090502@xs4all.nl> <20070218155445.GV7584@csclub.uwaterloo.ca> <45D87BA2.9020001@xs4all.nl> <20070218193901.GN7582@csclub.uwaterloo.ca> <45D9BDBF.8040405@xs4all.nl> From: Krzysztof Halasa Date: Mon, 19 Feb 2007 21:37:00 +0100 In-Reply-To: <45D9BDBF.8040405@xs4all.nl> (Udo van den Heuvel's message of "Mon, 19 Feb 2007 16:09:51 +0100") Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 878 Lines: 20 Udo van den Heuvel writes: > At the bottom I added a dmesg output of the kernel after boot. > I more or less know that irq 20 for the DVB-S card (saa7146 (1)) is > 'working'. I know that irq 16 for saa7146 (0) (DVB-T) is not working for > i2c although the card does work perfectly for DVB-T reception (picture, > low CPU load, etc) with only reception as the bottleneck. BTW: Can you check which device # and IRQ does the card get if plugged directly into the PCI slot on board (without the riser)? Is it a VIA ITX board? I think I have VIA's riser card somewhere, could check what it does. -- Krzysztof Halasa - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/