Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965607AbXBTAMi (ORCPT ); Mon, 19 Feb 2007 19:12:38 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965625AbXBTAMh (ORCPT ); Mon, 19 Feb 2007 19:12:37 -0500 Received: from adelphi.physics.adelaide.edu.au ([129.127.102.1]:35573 "EHLO adelphi.physics.adelaide.edu.au" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965614AbXBTAMN (ORCPT ); Mon, 19 Feb 2007 19:12:13 -0500 From: Jonathan Woithe Message-Id: <200702200012.l1K0CAmv017140@turbo.physics.adelaide.edu.au> Subject: 2.6.20: fails to turn laptop power off (ACPI?) To: linux-kernel@vger.kernel.org Date: Tue, 20 Feb 2007 10:42:10 +1030 (CST) Cc: jwoithe@physics.adelaide.edu.au (Jonathan Woithe) X-Mailer: ELM [version 2.5 PL6] MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19351 Lines: 387 As of 2.6.20 the kernel has not been able to turn the power off on my laptop during shutdown. Up to and including 2.6.19, pressing the power button triggered a shutdown via the ACPI system. Under 2.6.20 (with the same kernel features enabled as far as I am aware) the system shutdown still occurs, but when the time comes for power to be cut all that happens is that the screen backlight turns off and the machine appears to hang indefinitely. The machine is a 2GHz Dothan Centrino. dmesg is included below. If more info is required please let me know. Regards jonathan Linux version 2.6.20-rt8+fw (jwoithe@halite) (gcc version 3.4.6) #2 PREEMPT Mon Feb 19 20:15:07 CST 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000003f570000 end: 000000003f670000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000003f670000 size: 0000000000011000 end: 000000003f681000 type: 3 copy_e820_map() start: 000000003f681000 size: 000000000007f000 end: 000000003f700000 type: 4 copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2 copy_e820_map() start: 00000000e0000000 size: 0000000010010000 end: 00000000f0010000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f670000 (usable) BIOS-e820: 000000003f670000 - 000000003f681000 (ACPI data) BIOS-e820: 000000003f681000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0010000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 118MB HIGHMEM available. 896MB LOWMEM available. Entering add_active_range(0, 0, 259696) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 259696 early_node_map[1] active PFN ranges 0: 0 -> 259696 On node 0 totalpages: 259696 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 236 pages used for memmap HighMem zone: 30084 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 FUJ ) @ 0x000f5710 ACPI: RSDT (v001 FUJ FJNB19C 0x01050000 FUJ 0x00000100) @ 0x3f67a548 ACPI: FADT (v001 FUJ FJNB19C 0x01050000 FUJ 0x00000100) @ 0x3f680f8c ACPI: MADT (v001 FUJ FJNB19C 0x01050000 FUJ 0x00000100) @ 0x3f680686 ACPI: SSDT (v001 FUJ FJNB19C 0x01050000 INTL 0x20030522) @ 0x3f6806e0 ACPI: SSDT (v001 FUJ FJNB19C 0x01050000 INTL 0x20030522) @ 0x3f680b25 ACPI: SSDT (v001 FUJ FJNB19C 0x01050000 INTL 0x20030522) @ 0x3f680d01 ACPI: MCFG (v001 FUJ FJNB19C 0x01050000 FUJ 0x00000100) @ 0x3f680f28 ACPI: BOOT (v001 FUJ FJNB19C 0x01050000 FUJ 0x00000100) @ 0x3f680f64 ACPI: DSDT (v001 FUJ FJNB19C 0x01050000 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:13 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000) Detected 1995.237 MHz processor. Real-Time Preemption Support (C) 2004-2007 Ingo Molnar Built 1 zonelists. Total pages: 257668 Kernel command line: BOOT_IMAGE=L-2.6.20-rt8+fw ro root=801 acpi_sleep=s3_bios pci=assign-busses mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 WARNING: experimental RCU implementation. PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1025720k/1038784k available (2178k kernel code, 12400k reserved, 833k data, 156k init, 121280k highmem) virtual kernel memory layout: fixmap : 0xfffaa000 - 0xfffff000 ( 340 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc03f4000 - 0xc041b000 ( 156 kB) .data : 0xc0320a8a - 0xc03f112c ( 833 kB) .text : 0xc0100000 - 0xc0320a8a (2178 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3992.37 BogoMIPS (lpj=1996189) Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: Intel(R) Pentium(R) M processor 2.00GHz stepping 08 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ENABLING IO-APIC IRQs .TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices SCSI subsystem initialized libata version 2.00 loaded. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: b0100000-b01fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 4, cardbus bridge: 0000:03:03.0 IO window: 00002000-000020ff IO window: 00002400-000024ff PREFETCH window: 50000000-53ffffff MEM window: 58000000-5bffffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-2fff MEM window: b0200000-b02fffff PREFETCH window: 50000000-53ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 16 (level, low) -> IRQ 17 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1835008 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x7f set to 0x1 Machine check exception polling timer started. highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] Allocate Port Service[0000:00:1c.1:pcie03] ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [CMB1] (battery present) ACPI: Battery Slot [CMB2] (battery absent) input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input1 ACPI: Lid Switch [LID] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) Real Time Clock Driver v1.12ac intel_rng: FWH not detected Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH6: chipset revision 4 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1410-0x1417, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: MATSHITADVD-RAM UJ-840S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led slum part ata1: SATA max UDMA/133 cmd 0xF881A500 ctl 0x0 bmdma 0x0 irq 19 ata2: SATA max UDMA/133 cmd 0xF881A580 ctl 0x0 bmdma 0x0 irq 19 ata3: SATA max UDMA/133 cmd 0xF881A600 ctl 0x0 bmdma 0x0 irq 19 ata4: SATA max UDMA/133 cmd 0xF881A680 ctl 0x0 bmdma 0x0 irq 19 scsi0 : ahci ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 31/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : ahci ata2: SATA link down (SStatus 0 SControl 0) scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080B 0000 PQ: 0 ANSI: 5 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input3 EDAC MC: Ver: 2.0.1 Feb 19 2007 TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI: (supports S0 S3 S4 S5) Time: acpi_pm clocksource has been installed. Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf8eb1, caps: 0xa04793/0x102000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /class/input/input4 Clocksource tsc unstable (delta = -434140355 ns) input: PS/2 Generic Mouse as /class/input/input5 ReiserFS: sda1: found reiserfs format "3.6" with standard journal ReiserFS: sda1: using ordered data mode ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda1: checking transaction log (sda1) ReiserFS: sda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 156k freed Write protecting the kernel read-only data: 598k Adding 506008k swap on /dev/sda5. Priority:-1 extents:1 across:506008k Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17 [drm] Initialized i915 1.6.0 20060119 on minor 0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001420 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001440 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001460 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001480 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xb0004000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 21 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[b0205000-b02057ff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: raw1394: /dev/raw1394 device initialized ieee1394: Host added: ID:BUS[0-00:1023] GUID[00000e10032944cc] ReiserFS: sda6: found reiserfs format "3.6" with standard journal ReiserFS: sda6: using ordered data mode ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda6: checking transaction log (sda6) ReiserFS: sda6: Using r5 hash to sort names ReiserFS: sda7: found reiserfs format "3.6" with standard journal ReiserFS: sda7: using ordered data mode ReiserFS: sda7: journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda7: checking transaction log (sda7) ReiserFS: sda7: Using r5 hash to sort names ReiserFS: sda8: found reiserfs format "3.6" with standard journal ReiserFS: sda8: using ordered data mode ReiserFS: sda8: journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: sda8: checking transaction log (sda8) ReiserFS: sda8: Using r5 hash to sort names Yenta: CardBus bridge found at 0000:03:03.0 [10cf:131e] Yenta O2: res at 0x94/0xD4: 00/ea Yenta O2: enabling read prefetch/write burst Yenta: ISA IRQ mask 0x0c38, PCI irq 17 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff pcmcia: parent PCI bridge Memory window: 0xb0200000 - 0xb02fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA sound/pci/hda/hda_intel.c:696: codec_mask = 0x3 ALSA sound/pci/hda/hda_codec.c:1748: hda_codec: PCI 10cf:1326, codec config 3 is selected - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/