Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Zong Li <zong.li@sifive.com>
To:     mturquette@baylibre.com, sboyd@kernel.org, palmer@dabbelt.com,
        paul.walmsley@sifive.com, lee.jones@linaro.org, robh+dt@kernel.org,
        devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
        linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Zong Li <zong.li@sifive.com>, Palmer Dabbelt <palmer@rivosinc.com>
Subject: [PATCH v2 3/5] riscv: dts: Change the macro name of prci in each device node
Date:   Fri,  4 Mar 2022 18:03:19 +0800
Message-Id: <db92d209fa700f7da8bc8028083476fcc138d80e.1646388139.git.zong.li@sifive.com>
In-Reply-To: <cover.1646388139.git.zong.li@sifive.com>
References: <cover.1646388139.git.zong.li@sifive.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

We currently change the macro name for fu540 and fu740 by adding the
prefix respectively, these marcos are referenced by some device nodes,
they should be modified as well.

Signed-off-by: Zong Li <zong.li@sifive.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
---
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 22 +++++++++---------
 arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 26 +++++++++++-----------
 2 files changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 3eef52b1a59b..aad45d7f498f 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -164,7 +164,7 @@ uart0: serial@10010000 {
 			reg = <0x0 0x10010000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <4>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			status = "disabled";
 		};
 		dma: dma@3000000 {
@@ -180,7 +180,7 @@ uart1: serial@10011000 {
 			reg = <0x0 0x10011000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <5>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			status = "disabled";
 		};
 		i2c0: i2c@10030000 {
@@ -188,7 +188,7 @@ i2c0: i2c@10030000 {
 			reg = <0x0 0x10030000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <50>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			reg-shift = <2>;
 			reg-io-width = <1>;
 			#address-cells = <1>;
@@ -201,7 +201,7 @@ qspi0: spi@10040000 {
 			      <0x0 0x20000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <51>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -212,7 +212,7 @@ qspi1: spi@10041000 {
 			      <0x0 0x30000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -222,7 +222,7 @@ qspi2: spi@10050000 {
 			reg = <0x0 0x10050000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <6>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -235,8 +235,8 @@ eth0: ethernet@10090000 {
 			      <0x0 0x100a0000 0x0 0x1000>;
 			local-mac-address = [00 00 00 00 00 00];
 			clock-names = "pclk", "hclk";
-			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
-				 <&prci PRCI_CLK_GEMGXLPLL>;
+			clocks = <&prci FU540_PRCI_CLK_GEMGXLPLL>,
+				 <&prci FU540_PRCI_CLK_GEMGXLPLL>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -246,7 +246,7 @@ pwm0: pwm@10020000 {
 			reg = <0x0 0x10020000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <42>, <43>, <44>, <45>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -255,7 +255,7 @@ pwm1: pwm@10021000 {
 			reg = <0x0 0x10021000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <46>, <47>, <48>, <49>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -281,7 +281,7 @@ gpio: gpio@10060000 {
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&prci PRCI_CLK_TLCLK>;
+			clocks = <&prci FU540_PRCI_CLK_TLCLK>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
index 8464b0e3c887..7b77c13496d8 100644
--- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -166,7 +166,7 @@ uart0: serial@10010000 {
 			reg = <0x0 0x10010000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <39>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			status = "disabled";
 		};
 		uart1: serial@10011000 {
@@ -174,7 +174,7 @@ uart1: serial@10011000 {
 			reg = <0x0 0x10011000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <40>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			status = "disabled";
 		};
 		i2c0: i2c@10030000 {
@@ -182,7 +182,7 @@ i2c0: i2c@10030000 {
 			reg = <0x0 0x10030000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <52>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			reg-shift = <2>;
 			reg-io-width = <1>;
 			#address-cells = <1>;
@@ -194,7 +194,7 @@ i2c1: i2c@10031000 {
 			reg = <0x0 0x10031000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <53>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			reg-shift = <2>;
 			reg-io-width = <1>;
 			#address-cells = <1>;
@@ -207,7 +207,7 @@ qspi0: spi@10040000 {
 			      <0x0 0x20000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <41>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -218,7 +218,7 @@ qspi1: spi@10041000 {
 			      <0x0 0x30000000 0x0 0x10000000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <42>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -228,7 +228,7 @@ spi0: spi@10050000 {
 			reg = <0x0 0x10050000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <43>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -241,8 +241,8 @@ eth0: ethernet@10090000 {
 			      <0x0 0x100a0000 0x0 0x1000>;
 			local-mac-address = [00 00 00 00 00 00];
 			clock-names = "pclk", "hclk";
-			clocks = <&prci PRCI_CLK_GEMGXLPLL>,
-				 <&prci PRCI_CLK_GEMGXLPLL>;
+			clocks = <&prci FU740_PRCI_CLK_GEMGXLPLL>,
+				 <&prci FU740_PRCI_CLK_GEMGXLPLL>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -252,7 +252,7 @@ pwm0: pwm@10020000 {
 			reg = <0x0 0x10020000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <44>, <45>, <46>, <47>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -261,7 +261,7 @@ pwm1: pwm@10021000 {
 			reg = <0x0 0x10021000 0x0 0x1000>;
 			interrupt-parent = <&plic0>;
 			interrupts = <48>, <49>, <50>, <51>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
@@ -287,7 +287,7 @@ gpio: gpio@10060000 {
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			clocks = <&prci PRCI_CLK_PCLK>;
+			clocks = <&prci FU740_PRCI_CLK_PCLK>;
 			status = "disabled";
 		};
 		pcie@e00000000 {
@@ -316,7 +316,7 @@ pcie@e00000000 {
 					<0x0 0x0 0x0 0x3 &plic0 59>,
 					<0x0 0x0 0x0 0x4 &plic0 60>;
 			clock-names = "pcie_aux";
-			clocks = <&prci PRCI_CLK_PCIE_AUX>;
+			clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
 			pwren-gpios = <&gpio 5 0>;
 			reset-gpios = <&gpio 8 0>;
 			resets = <&prci 4>;
-- 
2.31.1