Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Tommy Haung <tommy_huang@aspeedtech.com>
To:     <joel@jms.id.au>, <airlied@linux.ie>, <daniel@ffwll.ch>,
        <robh+dt@kernel.org>, <andrew@aj.id.au>,
        <linux-aspeed@lists.ozlabs.org>, <dri-devel@lists.freedesktop.org>,
        <devicetree@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>
CC:     <BMC-SW@aspeedtech.com>
Subject: [PATCH v1 0/2] Add 1024x768 timing for AST2600
Date:   Fri, 4 Mar 2022 14:31:35 +0800
Message-ID: <20220304063137.12970-1-tommy_huang@aspeedtech.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

v1: 
  Add 1024x768@70Hz for AST2600 soc display timing selection.
  Add gfx flag for future usage.

Testing steps:

    1. Add below config to turn VT and LOGO on.

	CONFIG_TTY=y
	CONFIG_VT=y
	CONFIG_CONSOLE_TRANSLATIONS=y
	CONFIG_VT_CONSOLE=y
	CONFIG_VT_CONSOLE_SLEEP=y
	CONFIG_HW_CONSOLE=y
	CONFIG_VT_HW_CONSOLE_BINDING=y
	CONFIG_UNIX98_PTYS=y
	CONFIG_LDISC_AUTOLOAD=y
	CONFIG_DEVMEM=y
	CONFIG_DUMMY_CONSOLE=y
	CONFIG_FRAMEBUFFER_CONSOLE=y
	CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
	CONFIG_LOGO=y
	CONFIG_LOGO_LINUX_CLUT224=y

  2. The Linux logo will be shown on the screen, when the BMC boot in Linux.
  3. Check the display mode is 1024x768@70Hz at AST2600.
  4. Check the display mode is 800x600@60Hz at AST2500.

Tommy Haung (2):
  drm/aspeed: Add gfx flags and clock selection for AST2600
  drm/aspeed: Add 1024x768 mode for AST2600

 drivers/gpu/drm/aspeed/aspeed_gfx.h      | 15 ++++++++++
 drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c | 35 ++++++++++++++++++++++++
 drivers/gpu/drm/aspeed/aspeed_gfx_drv.c  | 20 ++++++++++++--
 drivers/gpu/drm/aspeed/aspeed_gfx_out.c  | 14 +++++++++-
 4 files changed, 81 insertions(+), 3 deletions(-)

-- 
2.17.1