Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 9 Mar 2022 16:26:22 +0100
From:   Jacopo Mondi <jacopo@jmondi.org>
To:     Eugen Hristev <eugen.hristev@microchip.com>
Cc:     linux-media@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        claudiu.beznea@microchip.com, hverkuil-cisco@xs4all.nl,
        nicolas.ferre@microchip.com
Subject: Re: [PATCH v7 08/13] media: atmel: atmel-isc: change format
 propagation to subdev into only verification
Message-ID: <20220309152622.w56ftglm5idxbwlm@uno.localdomain>
References: <20220307120423.2427631-1-eugen.hristev@microchip.com>
 <20220307120423.2427631-9-eugen.hristev@microchip.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20220307120423.2427631-9-eugen.hristev@microchip.com>
Precedence: bulk

Hi Eugen

On Mon, Mar 07, 2022 at 02:04:18PM +0200, Eugen Hristev wrote:
> As a top MC video driver, the atmel-isc should not propagate the format to the
> subdevice, it should rather check at start_streaming() time if the subdev is properly
> configured with a compatible format.
> Removed the whole format finding logic, and reworked the format verification
> at start_streaming time, such that the ISC will return an error if the subdevice
> is not properly configured. To achieve this, media_pipeline_start
> is called and a link_validate callback is created to check the formats.
> With this being done, the module parameter 'sensor_preferred' makes no sense
> anymore. The ISC should not decide which format the sensor is using. The
> ISC should only cope with the situation and inform userspace if the streaming
> is possible in the current configuration.
> The redesign of the format propagation has also risen the question of the
> enumfmt callback. If enumfmt is called with an mbus_code, the enumfmt handler
> should only return the formats that are supported for this mbus_code.
> Otherwise, the enumfmt will report all the formats that the ISC could output.
> With this rework, the dynamic list of user formats is removed. It makes no
> more sense to identify at complete time which formats the sensor could emit,
> and add those into a separate dynamic list.
> The ISC will start with a simple preconfigured default format, and at
> link validate time, decide whether it can use the format that is configured
> on the sink or not.
>
> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
> ---
> Changes in v7:
> - minor typos as suggested by Jacopo
> - small changes, reduce some indentation, modified an index, as suggested by
> Jacopo
>
> Changes in v6:
> - reworked a bit enum_fmt as suggested by Jacopo
>
> Changes in v5:
> - removed user_formats dynamic list as it is now pointless
> - greatly simplified the enum_fmt function
> - removed some init code that was useless now
>
> Changes in v4:
> - moved validation code into link_validate and used media_pipeline_start
> - merged this patch with the enum_fmt patch which was previously in v3 of
> the series
>
> Changes in v3:
> - clamp to maximum resolution once the frame size from the subdev is found
>
>  drivers/media/platform/atmel/atmel-isc-base.c | 412 ++++++++----------
>  .../media/platform/atmel/atmel-isc-scaler.c   |   5 +
>  drivers/media/platform/atmel/atmel-isc.h      |  13 +-
>  .../media/platform/atmel/atmel-sama5d2-isc.c  |  20 +
>  .../media/platform/atmel/atmel-sama7g5-isc.c  |  20 +
>  5 files changed, 236 insertions(+), 234 deletions(-)
>
> diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
> index ee1dda6707a0..28937c6789b6 100644
> --- a/drivers/media/platform/atmel/atmel-isc-base.c
> +++ b/drivers/media/platform/atmel/atmel-isc-base.c
> @@ -36,11 +36,6 @@ static unsigned int debug;
>  module_param(debug, int, 0644);
>  MODULE_PARM_DESC(debug, "debug level (0-2)");
>
> -static unsigned int sensor_preferred = 1;
> -module_param(sensor_preferred, uint, 0644);
> -MODULE_PARM_DESC(sensor_preferred,
> -		 "Sensor is preferred to output the specified format (1-on 0-off), default 1");
> -
>  #define ISC_IS_FORMAT_RAW(mbus_code) \
>  	(((mbus_code) & 0xf000) == 0x3000)
>
> @@ -337,6 +332,10 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
>  	unsigned long flags;
>  	int ret;
>
> +	ret = media_pipeline_start(&isc->video_dev.entity, &isc->mpipe);
> +	if (ret)
> +		goto err_pipeline_start;
> +
>  	/* Enable stream on the sub device */
>  	ret = v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 1);
>  	if (ret && ret != -ENOIOCTLCMD) {
> @@ -385,6 +384,9 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
>  	v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
>
>  err_start_stream:
> +	media_pipeline_stop(&isc->video_dev.entity);
> +
> +err_pipeline_start:
>  	spin_lock_irqsave(&isc->dma_queue_lock, flags);
>  	list_for_each_entry(buf, &isc->dma_queue, list)
>  		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
> @@ -423,6 +425,9 @@ static void isc_stop_streaming(struct vb2_queue *vq)
>  	if (ret && ret != -ENOIOCTLCMD)
>  		v4l2_err(&isc->v4l2_dev, "stream off failed in subdev\n");
>
> +	/* Stop media pipeline */
> +	media_pipeline_stop(&isc->video_dev.entity);
> +
>  	/* Release all active buffers */
>  	spin_lock_irqsave(&isc->dma_queue_lock, flags);
>  	if (unlikely(isc->cur_frm)) {
> @@ -453,22 +458,6 @@ static void isc_buffer_queue(struct vb2_buffer *vb)
>  	spin_unlock_irqrestore(&isc->dma_queue_lock, flags);
>  }
>
> -static struct isc_format *find_format_by_fourcc(struct isc_device *isc,
> -						 unsigned int fourcc)
> -{
> -	unsigned int num_formats = isc->num_user_formats;
> -	struct isc_format *fmt;
> -	unsigned int i;
> -
> -	for (i = 0; i < num_formats; i++) {
> -		fmt = isc->user_formats[i];
> -		if (fmt->fourcc == fourcc)
> -			return fmt;
> -	}
> -
> -	return NULL;
> -}
> -
>  static const struct vb2_ops isc_vb2_ops = {
>  	.queue_setup		= isc_queue_setup,
>  	.wait_prepare		= vb2_ops_wait_prepare,
> @@ -497,23 +486,57 @@ static int isc_enum_fmt_vid_cap(struct file *file, void *priv,
>  {
>  	struct isc_device *isc = video_drvdata(file);
>  	u32 index = f->index;
> -	u32 i, supported_index;
> +	u32 i, supported_index = 0;
> +	struct isc_format *fmt;
> +
> +	/*
> +	 * If we are not asked a specific mbus_code, we have to report all
> +	 * the formats that we can output.
> +	 */
> +	if (!f->mbus_code) {
> +		if (index >= isc->controller_formats_size)
> +			return -EINVAL;
>
> -	if (index < isc->controller_formats_size) {
>  		f->pixelformat = isc->controller_formats[index].fourcc;
> +
> +		return 0;
> +	}
> +
> +	/*
> +	 * If a specific mbus_code is requested, check if we support
> +	 * this mbus_code as input for the ISC.
> +	 * If it's supported, then we report the corresponding pixelformat
> +	 * as first possible option for the ISC.
> +	 * E.g. mbus MEDIA_BUS_FMT_YUYV8_2X8 and report
> +	 * 'YUYV' (YUYV 4:2:2)
> +	 */
> +	fmt = isc_find_format_by_code(isc, f->mbus_code, &i);
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	if (!index) {
> +		f->pixelformat = fmt->fourcc;
> +
>  		return 0;
>  	}
>
> -	index -= isc->controller_formats_size;
> +	supported_index++;
>
> -	supported_index = 0;
> +	/* If the index is not raw, we don't have anymore formats to report */
> +	if (!ISC_IS_FORMAT_RAW(f->mbus_code))
> +		return -EINVAL;
>
> -	for (i = 0; i < isc->formats_list_size; i++) {
> -		if (!ISC_IS_FORMAT_RAW(isc->formats_list[i].mbus_code) ||
> -		    !isc->formats_list[i].sd_support)
> +	/*
> +	 * We are asked for a specific mbus code, which is raw.
> +	 * We have to search through the formats we can convert to.
> +	 * We have to skip the raw formats, we cannot convert to raw.
> +	 * E.g. 'AR12' (16-bit ARGB 4-4-4-4), 'AR15' (16-bit ARGB 1-5-5-5), etc.
> +	 */
> +	for (i = 0; i < isc->controller_formats_size; i++) {
> +		if (isc->controller_formats[i].raw)
>  			continue;
> -		if (supported_index == index) {
> -			f->pixelformat = isc->formats_list[i].fourcc;
> +		if (index == supported_index) {
> +			f->pixelformat = isc->controller_formats[i].fourcc;

This looks good to me
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>

Thanks
  j

>  			return 0;
>  		}
>  		supported_index++;
> @@ -584,20 +607,30 @@ static int isc_try_validate_formats(struct isc_device *isc)
>  		break;
>  	default:
>  	/* any other different formats are not supported */
> +		v4l2_err(&isc->v4l2_dev, "Requested unsupported format.\n");
>  		ret = -EINVAL;
>  	}
>  	v4l2_dbg(1, debug, &isc->v4l2_dev,
>  		 "Format validation, requested rgb=%u, yuv=%u, grey=%u, bayer=%u\n",
>  		 rgb, yuv, grey, bayer);
>
> -	/* we cannot output RAW if we do not receive RAW */
> -	if ((bayer) && !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code))
> +	if (bayer &&
> +	    !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
> +		v4l2_err(&isc->v4l2_dev, "Cannot output RAW if we do not receive RAW.\n");
>  		return -EINVAL;
> +	}
>
> -	/* we cannot output GREY if we do not receive RAW/GREY */
>  	if (grey && !ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code) &&
> -	    !ISC_IS_FORMAT_GREY(isc->try_config.sd_format->mbus_code))
> +	    !ISC_IS_FORMAT_GREY(isc->try_config.sd_format->mbus_code)) {
> +		v4l2_err(&isc->v4l2_dev, "Cannot output GREY if we do not receive RAW/GREY.\n");
>  		return -EINVAL;
> +	}
> +
> +	if ((rgb || bayer || yuv) &&
> +	    ISC_IS_FORMAT_GREY(isc->try_config.sd_format->mbus_code)) {
> +		v4l2_err(&isc->v4l2_dev, "Cannot convert GREY to another format.\n");
> +		return -EINVAL;
> +	}
>
>  	return ret;
>  }
> @@ -825,7 +858,7 @@ static void isc_try_fse(struct isc_device *isc,
>  	 * If we do not know yet which format the subdev is using, we cannot
>  	 * do anything.
>  	 */
> -	if (!isc->try_config.sd_format)
> +	if (!isc->config.sd_format)
>  		return;
>
>  	fse.code = isc->try_config.sd_format->mbus_code;
> @@ -846,180 +879,140 @@ static void isc_try_fse(struct isc_device *isc,
>  	}
>  }
>
> -static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
> -			u32 *code)
> +static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f)
>  {
> -	int i;
> -	struct isc_format *sd_fmt = NULL, *direct_fmt = NULL;
>  	struct v4l2_pix_format *pixfmt = &f->fmt.pix;
> -	struct v4l2_subdev_pad_config pad_cfg = {};
> -	struct v4l2_subdev_state pad_state = {
> -		.pads = &pad_cfg
> -		};
> -	struct v4l2_subdev_format format = {
> -		.which = V4L2_SUBDEV_FORMAT_TRY,
> -	};
> -	u32 mbus_code;
> -	int ret;
> -	bool rlp_dma_direct_dump = false;
> +	unsigned int i;
>
>  	if (f->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
>  		return -EINVAL;
>
> -	/* Step 1: find a RAW format that is supported */
> -	for (i = 0; i < isc->num_user_formats; i++) {
> -		if (ISC_IS_FORMAT_RAW(isc->user_formats[i]->mbus_code)) {
> -			sd_fmt = isc->user_formats[i];
> +	isc->try_config.fourcc = isc->controller_formats[0].fourcc;
> +
> +	/* find if the format requested is supported */
> +	for (i = 0; i < isc->controller_formats_size; i++)
> +		if (isc->controller_formats[i].fourcc == pixfmt->pixelformat) {
> +			isc->try_config.fourcc = pixfmt->pixelformat;
>  			break;
>  		}
> -	}
> -	/* Step 2: We can continue with this RAW format, or we can look
> -	 * for better: maybe sensor supports directly what we need.
> -	 */
> -	direct_fmt = find_format_by_fourcc(isc, pixfmt->pixelformat);
> -
> -	/* Step 3: We have both. We decide given the module parameter which
> -	 * one to use.
> -	 */
> -	if (direct_fmt && sd_fmt && sensor_preferred)
> -		sd_fmt = direct_fmt;
> -
> -	/* Step 4: we do not have RAW but we have a direct format. Use it. */
> -	if (direct_fmt && !sd_fmt)
> -		sd_fmt = direct_fmt;
> -
> -	/* Step 5: if we are using a direct format, we need to package
> -	 * everything as 8 bit data and just dump it
> -	 */
> -	if (sd_fmt == direct_fmt)
> -		rlp_dma_direct_dump = true;
> -
> -	/* Step 6: We have no format. This can happen if the userspace
> -	 * requests some weird/invalid format.
> -	 * In this case, default to whatever we have
> -	 */
> -	if (!sd_fmt && !direct_fmt) {
> -		sd_fmt = isc->user_formats[isc->num_user_formats - 1];
> -		v4l2_dbg(1, debug, &isc->v4l2_dev,
> -			 "Sensor not supporting %.4s, using %.4s\n",
> -			 (char *)&pixfmt->pixelformat, (char *)&sd_fmt->fourcc);
> -	}
> -
> -	if (!sd_fmt) {
> -		ret = -EINVAL;
> -		goto isc_try_fmt_err;
> -	}
> -
> -	/* Step 7: Print out what we decided for debugging */
> -	v4l2_dbg(1, debug, &isc->v4l2_dev,
> -		 "Preferring to have sensor using format %.4s\n",
> -		 (char *)&sd_fmt->fourcc);
>
> -	/* Step 8: at this moment we decided which format the subdev will use */
> -	isc->try_config.sd_format = sd_fmt;
> +	isc_try_configure_rlp_dma(isc, false);
>
>  	/* Limit to Atmel ISC hardware capabilities */
> -	if (pixfmt->width > isc->max_width)
> -		pixfmt->width = isc->max_width;
> -	if (pixfmt->height > isc->max_height)
> -		pixfmt->height = isc->max_height;
> -
> -	/*
> -	 * The mbus format is the one the subdev outputs.
> -	 * The pixels will be transferred in this format Sensor -> ISC
> -	 */
> -	mbus_code = sd_fmt->mbus_code;
> -
> -	/*
> -	 * Validate formats. If the required format is not OK, default to raw.
> -	 */
> -
> -	isc->try_config.fourcc = pixfmt->pixelformat;
> -
> -	if (isc_try_validate_formats(isc)) {
> -		pixfmt->pixelformat = isc->try_config.fourcc = sd_fmt->fourcc;
> -		/* Re-try to validate the new format */
> -		ret = isc_try_validate_formats(isc);
> -		if (ret)
> -			goto isc_try_fmt_err;
> -	}
> -
> -	ret = isc_try_configure_rlp_dma(isc, rlp_dma_direct_dump);
> -	if (ret)
> -		goto isc_try_fmt_err;
> -
> -	ret = isc_try_configure_pipeline(isc);
> -	if (ret)
> -		goto isc_try_fmt_err;
> -
> -	/* Obtain frame sizes if possible to have crop requirements ready */
> -	isc_try_fse(isc, &pad_state);
> -
> -	v4l2_fill_mbus_format(&format.format, pixfmt, mbus_code);
> -	ret = v4l2_subdev_call(isc->current_subdev->sd, pad, set_fmt,
> -			       &pad_state, &format);
> -	if (ret < 0)
> -		goto isc_try_fmt_subdev_err;
> -
> -	v4l2_fill_pix_format(pixfmt, &format.format);
> +	v4l_bound_align_image(&pixfmt->width, 16, isc->max_width, 0,
> +			      &pixfmt->height, 16, isc->max_height, 0, 0);
> +	/* If we did not find the requested format, we will fallback here */
> +	pixfmt->pixelformat = isc->try_config.fourcc;
> +	pixfmt->colorspace = V4L2_COLORSPACE_SRGB;
> +	pixfmt->field = V4L2_FIELD_NONE;
>
> -	/* Limit to Atmel ISC hardware capabilities */
> -	if (pixfmt->width > isc->max_width)
> -		pixfmt->width = isc->max_width;
> -	if (pixfmt->height > isc->max_height)
> -		pixfmt->height = isc->max_height;
>
> -	pixfmt->field = V4L2_FIELD_NONE;
>  	pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp_v4l2) >> 3;
>  	pixfmt->sizeimage = ((pixfmt->width * isc->try_config.bpp) >> 3) *
>  			     pixfmt->height;
>
> -	if (code)
> -		*code = mbus_code;
> +	isc->try_fmt = *f;
>
>  	return 0;
> +}
>
> -isc_try_fmt_err:
> -	v4l2_err(&isc->v4l2_dev, "Could not find any possible format for a working pipeline\n");
> -isc_try_fmt_subdev_err:
> -	memset(&isc->try_config, 0, sizeof(isc->try_config));
> +static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f)
> +{
> +	isc_try_fmt(isc, f);
>
> -	return ret;
> +	/* make the try configuration active */
> +	isc->config = isc->try_config;
> +	isc->fmt = isc->try_fmt;
> +
> +	v4l2_dbg(1, debug, &isc->v4l2_dev, "ISC set_fmt to %.4s @%dx%d\n",
> +		 (char *)&f->fmt.pix.pixelformat,
> +		 f->fmt.pix.width, f->fmt.pix.height);
> +
> +	return 0;
>  }
>
> -static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f)
> +static int isc_validate(struct isc_device *isc)
>  {
> +	int ret;
> +	int i;
> +	struct isc_format *sd_fmt = NULL;
> +	struct v4l2_pix_format *pixfmt = &isc->fmt.fmt.pix;
>  	struct v4l2_subdev_format format = {
>  		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
> +		.pad = isc->remote_pad,
> +	};
> +	struct v4l2_subdev_pad_config pad_cfg = {};
> +	struct v4l2_subdev_state pad_state = {
> +		.pads = &pad_cfg,
>  	};
> -	u32 mbus_code = 0;
> -	int ret;
>
> -	ret = isc_try_fmt(isc, f, &mbus_code);
> +	/* Get current format from subdev */
> +	ret = v4l2_subdev_call(isc->current_subdev->sd, pad, get_fmt, NULL,
> +			       &format);
>  	if (ret)
>  		return ret;
>
> -	v4l2_fill_mbus_format(&format.format, &f->fmt.pix, mbus_code);
> -	ret = v4l2_subdev_call(isc->current_subdev->sd, pad,
> -			       set_fmt, NULL, &format);
> -	if (ret < 0)
> -		return ret;
> +	/* Identify the subdev's format configuration */
> +	for (i = 0; i < isc->formats_list_size; i++)
> +		if (isc->formats_list[i].mbus_code == format.format.code) {
> +			sd_fmt = &isc->formats_list[i];
> +			break;
> +		}
> +
> +	/* Check if the format is not supported */
> +	if (!sd_fmt) {
> +		v4l2_err(&isc->v4l2_dev,
> +			 "Current subdevice is streaming a media bus code that is not supported 0x%x\n",
> +			 format.format.code);
> +		return -EPIPE;
> +	}
> +
> +	/* At this moment we know which format the subdev will use */
> +	isc->try_config.sd_format = sd_fmt;
> +
> +	/* If the sensor is not RAW, we can only do a direct dump */
> +	if (!ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code))
> +		isc_try_configure_rlp_dma(isc, true);
>
>  	/* Limit to Atmel ISC hardware capabilities */
> -	if (f->fmt.pix.width > isc->max_width)
> -		f->fmt.pix.width = isc->max_width;
> -	if (f->fmt.pix.height > isc->max_height)
> -		f->fmt.pix.height = isc->max_height;
> +	v4l_bound_align_image(&format.format.width, 16, isc->max_width, 0,
> +			      &format.format.height, 16, isc->max_height, 0, 0);
>
> -	isc->fmt = *f;
> +	/* Check if the frame size is the same. Otherwise we may overflow */
> +	if (pixfmt->height != format.format.height ||
> +	    pixfmt->width != format.format.width) {
> +		v4l2_err(&isc->v4l2_dev,
> +			 "ISC not configured with the proper frame size: %dx%d\n",
> +			 format.format.width, format.format.height);
> +		return -EPIPE;
> +	}
>
> +	v4l2_dbg(1, debug, &isc->v4l2_dev,
> +		 "Identified subdev using format %.4s with %dx%d %d bpp\n",
> +		 (char *)&sd_fmt->fourcc, pixfmt->width, pixfmt->height,
> +		 isc->try_config.bpp);
> +
> +	/* Reset and restart AWB if the subdevice changed the format */
>  	if (isc->try_config.sd_format && isc->config.sd_format &&
>  	    isc->try_config.sd_format != isc->config.sd_format) {
>  		isc->ctrls.hist_stat = HIST_INIT;
>  		isc_reset_awb_ctrls(isc);
>  		isc_update_v4l2_ctrls(isc);
>  	}
> -	/* make the try configuration active */
> +
> +	/* Validate formats */
> +	ret = isc_try_validate_formats(isc);
> +	if (ret)
> +		return ret;
> +
> +	/* Obtain frame sizes if possible to have crop requirements ready */
> +	isc_try_fse(isc, &pad_state);
> +
> +	/* Configure ISC pipeline for the config */
> +	ret = isc_try_configure_pipeline(isc);
> +	if (ret)
> +		return ret;
> +
>  	isc->config = isc->try_config;
>
>  	v4l2_dbg(1, debug, &isc->v4l2_dev, "New ISC configuration in place\n");
> @@ -1043,7 +1036,7 @@ static int isc_try_fmt_vid_cap(struct file *file, void *priv,
>  {
>  	struct isc_device *isc = video_drvdata(file);
>
> -	return isc_try_fmt(isc, f, NULL);
> +	return isc_try_fmt(isc, f);
>  }
>
>  static int isc_enum_input(struct file *file, void *priv,
> @@ -1098,10 +1091,6 @@ static int isc_enum_framesizes(struct file *file, void *fh,
>  	if (fsize->index)
>  		return -EINVAL;
>
> -	for (i = 0; i < isc->num_user_formats; i++)
> -		if (isc->user_formats[i]->fourcc == fsize->pixel_format)
> -			ret = 0;
> -
>  	for (i = 0; i < isc->controller_formats_size; i++)
>  		if (isc->controller_formats[i].fourcc == fsize->pixel_format)
>  			ret = 0;
> @@ -1782,52 +1771,6 @@ struct isc_format *isc_find_format_by_code(struct isc_device *isc,
>  }
>  EXPORT_SYMBOL_GPL(isc_find_format_by_code);
>
> -static int isc_formats_init(struct isc_device *isc)
> -{
> -	struct isc_format *fmt;
> -	struct v4l2_subdev *subdev = isc->current_subdev->sd;
> -	unsigned int num_fmts, i, j;
> -	u32 list_size = isc->formats_list_size;
> -	struct v4l2_subdev_mbus_code_enum mbus_code = {
> -		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
> -	};
> -
> -	num_fmts = 0;
> -	while (!v4l2_subdev_call(subdev, pad, enum_mbus_code,
> -	       NULL, &mbus_code)) {
> -		mbus_code.index++;
> -
> -		fmt = isc_find_format_by_code(isc, mbus_code.code, &i);
> -		if (!fmt) {
> -			v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n",
> -				  mbus_code.code);
> -			continue;
> -		}
> -
> -		fmt->sd_support = true;
> -		num_fmts++;
> -	}
> -
> -	if (!num_fmts)
> -		return -ENXIO;
> -
> -	isc->num_user_formats = num_fmts;
> -	isc->user_formats = devm_kcalloc(isc->dev,
> -					 num_fmts, sizeof(*isc->user_formats),
> -					 GFP_KERNEL);
> -	if (!isc->user_formats)
> -		return -ENOMEM;
> -
> -	fmt = &isc->formats_list[0];
> -	for (i = 0, j = 0; i < list_size; i++) {
> -		if (fmt->sd_support)
> -			isc->user_formats[j++] = fmt;
> -		fmt++;
> -	}
> -
> -	return 0;
> -}
> -
>  static int isc_set_default_fmt(struct isc_device *isc)
>  {
>  	struct v4l2_format f = {
> @@ -1836,12 +1779,12 @@ static int isc_set_default_fmt(struct isc_device *isc)
>  			.width		= VGA_WIDTH,
>  			.height		= VGA_HEIGHT,
>  			.field		= V4L2_FIELD_NONE,
> -			.pixelformat	= isc->user_formats[0]->fourcc,
> +			.pixelformat	= isc->controller_formats[0].fourcc,
>  		},
>  	};
>  	int ret;
>
> -	ret = isc_try_fmt(isc, &f, NULL);
> +	ret = isc_try_fmt(isc, &f);
>  	if (ret)
>  		return ret;
>
> @@ -1896,13 +1839,6 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
>  	spin_lock_init(&isc->dma_queue_lock);
>  	spin_lock_init(&isc->awb_lock);
>
> -	ret = isc_formats_init(isc);
> -	if (ret < 0) {
> -		v4l2_err(&isc->v4l2_dev,
> -			 "Init format failed: %d\n", ret);
> -		goto isc_async_complete_err;
> -	}
> -
>  	ret = isc_set_default_fmt(isc);
>  	if (ret) {
>  		v4l2_err(&isc->v4l2_dev, "Could not set default format\n");
> @@ -2016,6 +1952,24 @@ int isc_pipeline_init(struct isc_device *isc)
>  }
>  EXPORT_SYMBOL_GPL(isc_pipeline_init);
>
> +int isc_link_validate(struct media_link *link)
> +{
> +	struct video_device *vdev =
> +		media_entity_to_video_device(link->sink->entity);
> +	struct isc_device *isc = video_get_drvdata(vdev);
> +	int ret;
> +
> +	ret = v4l2_subdev_link_validate(link);
> +	if (ret)
> +		return ret;
> +
> +	return isc_validate(isc);
> +}
> +
> +static const struct media_entity_operations isc_entity_operations = {
> +	.link_validate = isc_link_validate,
> +};
> +
>  int isc_mc_init(struct isc_device *isc, u32 ver)
>  {
>  	const struct of_device_id *match;
> @@ -2023,6 +1977,8 @@ int isc_mc_init(struct isc_device *isc, u32 ver)
>
>  	isc->video_dev.entity.function = MEDIA_ENT_F_IO_V4L;
>  	isc->video_dev.entity.flags = MEDIA_ENT_FL_DEFAULT;
> +	isc->video_dev.entity.ops = &isc_entity_operations;
> +
>  	isc->pads[ISC_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
>
>  	ret = media_entity_pads_init(&isc->video_dev.entity, ISC_PADS_NUM,
> diff --git a/drivers/media/platform/atmel/atmel-isc-scaler.c b/drivers/media/platform/atmel/atmel-isc-scaler.c
> index d3dd131fdae0..485ba61bccb0 100644
> --- a/drivers/media/platform/atmel/atmel-isc-scaler.c
> +++ b/drivers/media/platform/atmel/atmel-isc-scaler.c
> @@ -182,6 +182,10 @@ static const struct v4l2_subdev_pad_ops isc_scaler_pad_ops = {
>  	.init_cfg = isc_scaler_init_cfg,
>  };
>
> +static const struct media_entity_operations isc_scaler_entity_ops = {
> +	.link_validate = v4l2_subdev_link_validate,
> +};
> +
>  static const struct v4l2_subdev_ops xisc_scaler_subdev_ops = {
>  	.pad = &isc_scaler_pad_ops,
>  };
> @@ -199,6 +203,7 @@ int isc_scaler_init(struct isc_device *isc)
>
>  	isc->scaler_sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>  	isc->scaler_sd.entity.function = MEDIA_ENT_F_PROC_VIDEO_SCALER;
> +	isc->scaler_sd.entity.ops = &isc_scaler_entity_ops;
>  	isc->scaler_pads[ISC_SCALER_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
>  	isc->scaler_pads[ISC_SCALER_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
>
> diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
> index f98f25a55e73..5b0100c8c245 100644
> --- a/drivers/media/platform/atmel/atmel-isc.h
> +++ b/drivers/media/platform/atmel/atmel-isc.h
> @@ -63,15 +63,16 @@ struct isc_subdev_entity {
>   * @cfa_baycfg:		If this format is RAW BAYER, indicate the type of bayer.
>  			this is either BGBG, RGRG, etc.
>   * @pfe_cfg0_bps:	Number of hardware data lines connected to the ISC
> + * @raw:		If the format is raw bayer.
>   */
>
>  struct isc_format {
>  	u32	fourcc;
>  	u32	mbus_code;
>  	u32	cfa_baycfg;
> -
> -	bool	sd_support;
>  	u32	pfe_cfg0_bps;
> +
> +	bool	raw;
>  };
>
>  /* Pipeline bitmap */
> @@ -216,8 +217,7 @@ enum isc_scaler_pads {
>   * @comp:		completion reference that signals frame completion
>   *
>   * @fmt:		current v42l format
> - * @user_formats:	list of formats that are supported and agreed with sd
> - * @num_user_formats:	how many formats are in user_formats
> + * @try_fmt:		current v4l2 try format
>   *
>   * @config:		current ISC format configuration
>   * @try_config:		the current ISC try format , not yet activated
> @@ -272,6 +272,7 @@ enum isc_scaler_pads {
>   * @formats_list_size:	size of formats_list array
>   * @pads:		media controller pads for isc video entity
>   * @mdev:		media device that is registered by the isc
> + * @mpipe:		media device pipeline used by the isc
>   * @remote_pad:		remote pad on the connected subdevice
>   * @scaler_sd:		subdevice for the scaler that isc registers
>   * @scaler_pads:	media controller pads for the scaler subdevice
> @@ -298,8 +299,7 @@ struct isc_device {
>  	struct completion	comp;
>
>  	struct v4l2_format	fmt;
> -	struct isc_format	**user_formats;
> -	unsigned int		num_user_formats;
> +	struct v4l2_format	try_fmt;
>
>  	struct fmt_config	config;
>  	struct fmt_config	try_config;
> @@ -369,6 +369,7 @@ struct isc_device {
>  	struct {
>  		struct media_pad		pads[ISC_PADS_NUM];
>  		struct media_device		mdev;
> +		struct media_pipeline		mpipe;
>
>  		u32				remote_pad;
>  	};
> diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> index d96ee3373889..2a651e237193 100644
> --- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> +++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
> @@ -80,20 +80,40 @@ static const struct isc_format sama5d2_controller_formats[] = {
>  		.fourcc		= V4L2_PIX_FMT_Y10,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SBGGR8,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SGBRG8,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SGRBG8,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SRGGB8,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SBGGR10,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SGBRG10,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SGRBG10,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SRGGB10,
> +		.raw		= true,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SBGGR12,
> +		.raw		= true,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SGBRG12,
> +		.raw		= true,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SGRBG12,
> +		.raw		= true,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SRGGB12,
> +		.raw		= true,
>  	},
>  };
>
> diff --git a/drivers/media/platform/atmel/atmel-sama7g5-isc.c b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
> index e07ae188c15f..a0d60cfdba7b 100644
> --- a/drivers/media/platform/atmel/atmel-sama7g5-isc.c
> +++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
> @@ -89,20 +89,40 @@ static const struct isc_format sama7g5_controller_formats[] = {
>  		.fourcc		= V4L2_PIX_FMT_Y16,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SBGGR8,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SGBRG8,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SGRBG8,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SRGGB8,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SBGGR10,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SGBRG10,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SGRBG10,
> +		.raw		= true,
>  	}, {
>  		.fourcc		= V4L2_PIX_FMT_SRGGB10,
> +		.raw		= true,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SBGGR12,
> +		.raw		= true,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SGBRG12,
> +		.raw		= true,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SGRBG12,
> +		.raw		= true,
> +	}, {
> +		.fourcc		= V4L2_PIX_FMT_SRGGB12,
> +		.raw		= true,
>  	},
>  };
>
> --
> 2.25.1
>