Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1422674AbXBUQqo (ORCPT ); Wed, 21 Feb 2007 11:46:44 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1422676AbXBUQqo (ORCPT ); Wed, 21 Feb 2007 11:46:44 -0500 Received: from aibn55.astro.uni-bonn.de ([131.220.96.55]:55177 "EHLO aibn55.astro.uni-bonn.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1422674AbXBUQql (ORCPT ); Wed, 21 Feb 2007 11:46:41 -0500 Message-ID: <45DC7769.7030206@astro.uni-bonn.de> Date: Wed, 21 Feb 2007 17:46:33 +0100 From: Manuel Metz User-Agent: Icedove 1.5.0.9 (X11/20061220) MIME-Version: 1.0 To: Tejun Heo CC: linux-kernel@vger.kernel.org Subject: Re: SATA ahci Bug in 2.6.19.x References: <7G2pJ-2iX-23@gated-at.bofh.it> <7G828-3zn-3@gated-at.bofh.it> <7HpWX-3D2-5@gated-at.bofh.it> <7Hrci-5ou-5@gated-at.bofh.it> <7HrP4-6t8-1@gated-at.bofh.it> <7Hvzs-3Tj-23@gated-at.bofh.it> <7IYJ1-281-27@gated-at.bofh.it> <45D2CEFC.4010900@astro.uni-bonn.de> <45DC3345.5000804@gmail.com> In-Reply-To: <45DC3345.5000804@gmail.com> Content-Type: multipart/mixed; boundary="------------040205020005070905060805" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 23721 Lines: 582 This is a multi-part message in MIME format. --------------040205020005070905060805 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Tejun Heo wrote: > Does it work if you give 'irqpoll' kernel parameter? > Yes this works with "irqpoll". But as you can see in the attached dmesg output, now I get a bunch of APIC errors ... ? --------------040205020005070905060805 Content-Type: text/plain; name="dmesg.sata_2.6.20.1.irqpoll" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.sata_2.6.20.1.irqpoll" Linux version 2.6.20.1 (root@aibn44) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed Feb 21 17:06:15 CET 2007 BIOS-provided physical RAM map: sanitize start sanitize end copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2 copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2 copy_e820_map() start: 0000000000100000 size: 000000007fed0000 end: 000000007ffd0000 type: 1 copy_e820_map() type is E820_RAM copy_e820_map() start: 000000007ffd0000 size: 000000000000e000 end: 000000007ffde000 type: 3 copy_e820_map() start: 000000007ffde000 size: 0000000000022000 end: 0000000080000000 type: 4 copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2 copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2 copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data) BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 Entering add_active_range(0, 0, 524240) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 524240 early_node_map[1] active PFN ranges 0: 0 -> 524240 On node 0 totalpages: 524240 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2303 pages used for memmap HighMem zone: 292561 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000fa970 ACPI: XSDT (v001 A M I OEMXSDT 0x02000615 MSFT 0x00000097) @ 0x7ffd0100 ACPI: FADT (v003 A M I OEMFACP 0x02000615 MSFT 0x00000097) @ 0x7ffd0290 ACPI: MADT (v001 A M I OEMAPIC 0x02000615 MSFT 0x00000097) @ 0x7ffd0390 ACPI: MCFG (v001 A M I OEMMCFG 0x02000615 MSFT 0x00000097) @ 0x7ffd03f0 ACPI: OEMB (v001 A M I AMI_OEM 0x02000615 MSFT 0x00000097) @ 0x7ffde040 ACPI: DSDT (v001 A0304 A0304001 0x00000001 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:11 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:11 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Detected 2000.124 MHz processor. Built 1 zonelists. Total pages: 520145 Kernel command line: root=/dev/sda1 ro irqpoll Misrouted IRQ fixup and polling support enabled This may significantly impact system performance mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2074160k/2096960k available (2948k kernel code, 21576k reserved, 843k data, 224k init, 1179456k highmem) virtual kernel memory layout: fixmap : 0xfff9d000 - 0xfffff000 ( 392 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04ba000 - 0xc04f2000 ( 224 kB) .data : 0xc03e11d5 - 0xc04b3f8c ( 843 kB) .text : 0xc0100000 - 0xc03e11d5 (2948 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4007.23 BogoMIPS (lpj=8014471) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Core 0 CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. Freeing SMP alternatives: 15k freed ACPI: Core revision 20060707 CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4000.38 BogoMIPS (lpj=8000765) CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Core 1 CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 01 Total of 2 processors activated (8007.61 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking TSC synchronization across 2 CPUs: CPU#0 had 283 usecs TSC skew, fixed it up. CPU#1 had -283 usecs TSC skew, fixed it up. Brought up 2 CPUs migration_cost=243 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG PCI: No mmconfig possible on 0:0 PCI: No mmconfig possible on 0:1 PCI: No mmconfig possible on 0:f PCI: No mmconfig possible on 0:10 PCI: No mmconfig possible on 0:11 PCI: No mmconfig possible on 0:13 PCI: No mmconfig possible on 0:18 PCI: No mmconfig possible on 1:0 PCI: No mmconfig possible on 5:c Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fd800000-fe8fffff PREFETCH window: f9700000-fd6fffff PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: fe900000-fe9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: c000-cfff MEM window: fea00000-feafffff PREFETCH window: 88000000-880fffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:02:00.1 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Machine check exception polling timer started. highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with ACLs, no debug enabled io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /class/input/input1 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU1] (supports 16 throttling states) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 64M @ 0xdc000000 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using get_cycles(). Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:05:0c.0[A] -> GSI 17 (level, low) -> IRQ 16 eth0: RTL8169s/8110s at 0xf8804c00, 00:11:6b:32:45:74, IRQ 16 pata_via 0000:00:0f.1: version 0.2.1 ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFC00 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFC08 irq 15 scsi0 : pata_via ata1.00: ATA-7, max UDMA/133, 240121728 sectors: LBA ata1.00: ata1: dev 0 multi count 16 ata1.01: ATA-7, max UDMA/133, 240121728 sectors: LBA ata1.01: ata1: dev 1 multi count 16 ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/133 scsi1 : pata_via ata2.00: ATAPI, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y120L0 YAR4 PQ: 0 ANSI: 5 SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: Attached scsi disk sda sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y120P0 YAR4 PQ: 0 ANSI: 5 SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 0:0:1:0: Attached scsi disk sdb sd 0:0:1:0: Attached scsi generic sg1 type 0 scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R1202 1026 PQ: 0 ANSI: 5 scsi 1:0:0:0: Attached scsi generic sg2 type 5 usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 17 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: debug port 1 ehci_hcd 0000:00:10.4: irq 17, io mem 0xfebff800 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 18 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 18, io base 0x0000e080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 17 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 17, io base 0x0000e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 19, io base 0x0000dc00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 20, io base 0x0000d880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usb 4-2: new full speed USB device using uhci_hcd and address 2 usb 4-2: configuration #1 chosen from 1 choice hub 4-2:1.0: USB hub found hub 4-2:1.0: 4 ports detected usb 4-2.1: new low speed USB device using uhci_hcd and address 3 usb 4-2.1: configuration #1 chosen from 1 choice usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-2.1 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input4 input: PC Speaker as /class/input/input5 Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (version 2.00.00) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 Starting balanced_irq Using IPI Shortcut mode Time: acpi_pm clocksource has been installed. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 224k freed ahci 0000:00:0f.0: version 2.0 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 19 ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode ahci 0000:00:0f.0: flags: 64bit ncq pm led clo pmp pio slum part ata3: SATA max UDMA/133 cmd 0xF8834D00 ctl 0x0 bmdma 0x0 irq 223 ata4: SATA max UDMA/133 cmd 0xF8834D80 ctl 0x0 bmdma 0x0 irq 223 ata5: SATA max UDMA/133 cmd 0xF8834E00 ctl 0x0 bmdma 0x0 irq 223 ata6: SATA max UDMA/133 cmd 0xF8834E80 ctl 0x0 bmdma 0x0 irq 223 scsi2 : ahci ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) APIC error on CPU0: 00(08) APIC error on CPU1: 00(08) ata3.00: ATA-6, max UDMA/100, 625142448 sectors: LBA48 ata3.00: ata3: dev 0 multi count 16 APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) ata3.00: configured for UDMA/100 scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) scsi 2:0:0:0: Direct-Access ATA WDC WD3200SD-01K 08.0 PQ: 0 ANSI: 5 SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc:<7>APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) sdc1 sd 2:0:0:0: Attached scsi disk sdc sd 2:0:0:0: Attached scsi generic sg3 type 0 ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:02:01.0 to 64 APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) Adding 979848k swap on /dev/sda4. Priority:-1 extents:1 across:979848k EXT3 FS on sda1, internal journal it87: Found IT8712F chip at 0xd00, revision 7 it87: in3 is VCC (+5V) it87: in7 is VCCH (+5V Stand-By) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) kjournald starting. Commit interval 5 seconds EXT3 FS on sda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem sdb1 Ending clean XFS mount for filesystem: sdb1 APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) kjournald starting. Commit interval 5 seconds APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) EXT3 FS on sdc1, internal journal EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 15 ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8192 buckets, 65536 max) r8169: eth0: link up ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT ttyS1: LSR safety check engaged! APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) NET: Registered protocol family 10 lo: Disabled Privacy Extensions APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) APIC error on CPU1: 08(08) APIC error on CPU0: 08(08) APIC error on CPU0: 08(08) APIC error on CPU1: 08(08) NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period eth0: no IPv6 routers present --------------040205020005070905060805-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/