Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Ansuel Smith <ansuelsmth@gmail.com>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Ansuel Smith <ansuelsmth@gmail.com>,
        Jonathan McDowell <noodles@earth.li>
Subject: [PATCH v3 10/18] ARM: dts: qcom: add saw for l2 cache and kraitcc for ipq8064
Date:   Wed,  9 Mar 2022 20:01:44 +0100
Message-Id: <20220309190152.7998-11-ansuelsmth@gmail.com>
In-Reply-To: <20220309190152.7998-1-ansuelsmth@gmail.com>
References: <20220309190152.7998-1-ansuelsmth@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Add saw compatible for l2 cache and kraitcc node for ipq8064 dtsi.
Also declare clock-output-names for acc0 and acc1 and qsb fixed clock
for the secondary mux.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 34 +++++++++++++++++++++++++++--
 1 file changed, 32 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index c579fb09e768..7df1c1482220 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -298,6 +298,12 @@ smem: smem@41000000 {
 	};
 
 	clocks {
+		qsb: qsb {
+			compatible = "fixed-clock";
+			clock-frequency = <384000000>;
+			#clock-cells = <0>;
+		};
+
 		cxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -504,11 +510,19 @@ IRQ_TYPE_EDGE_RISING)>,
 		acc0: clock-controller@2088000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+			clock-output-names = "acpu0_aux";
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
 		};
 
 		acc1: clock-controller@2098000 {
 			compatible = "qcom,kpss-acc-v1";
 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+			clock-output-names = "acpu1_aux";
+			clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+			clock-names = "pll8_vote", "pxo";
+			#clock-cells = <0>;
 		};
 
 		adm_dma: dma-controller@18300000 {
@@ -532,17 +546,23 @@ adm_dma: dma-controller@18300000 {
 		};
 
 		saw0: regulator@2089000 {
-			compatible = "qcom,saw2";
+			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
 			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
 			regulator;
 		};
 
 		saw1: regulator@2099000 {
-			compatible = "qcom,saw2";
+			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
 			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
 			regulator;
 		};
 
+		saw_l2: regulator@02012000 {
+			compatible = "qcom,saw2", "syscon";
+			reg = <0x02012000 0x1000>;
+			regulator;
+		};
+
 		gsbi2: gsbi@12480000 {
 			compatible = "qcom,gsbi-v1.0.0";
 			cell-index = <2>;
@@ -899,6 +919,16 @@ l2cc: clock-controller@2011000 {
 			clock-output-names = "acpu_l2_aux";
 		};
 
+		kraitcc: clock-controller {
+			compatible = "qcom,krait-cc-v1";
+			clocks = <&gcc PLL9>, <&gcc PLL10>, <&gcc PLL12>,
+				 <&acc0>, <&acc1>, <&l2cc>, <&qsb>;
+			clock-names = "hfpll0", "hfpll1", "hfpll_l2",
+				      "acpu0_aux", "acpu1_aux", "acpu_l2_aux",
+				      "qsb";
+			#clock-cells = <1>;
+		};
+
 		lcc: clock-controller@28000000 {
 			compatible = "qcom,lcc-ipq8064";
 			reg = <0x28000000 0x1000>;
-- 
2.34.1