Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751370AbXBUXur (ORCPT ); Wed, 21 Feb 2007 18:50:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751372AbXBUXur (ORCPT ); Wed, 21 Feb 2007 18:50:47 -0500 Received: from mx1.suse.de ([195.135.220.2]:59828 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751370AbXBUXup (ORCPT ); Wed, 21 Feb 2007 18:50:45 -0500 Date: Wed, 21 Feb 2007 15:49:06 -0800 From: Greg KH To: Arkadiusz Miskiewicz Cc: linux-kernel@vger.kernel.org, linux-usb-devel@lists.sourceforge.net Subject: Re: 2.6.21rc1 git usb mouse stops working after resume from ram Message-ID: <20070221234905.GB7133@kroah.com> References: <200702212314.56958.arekm@maven.pl> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <200702212314.56958.arekm@maven.pl> User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24326 Lines: 368 On Wed, Feb 21, 2007 at 11:14:56PM +0100, Arkadiusz Miskiewicz wrote: > Hello, > > Today version of Linus git tree has a problem with resuming of usb devices. My > trackball is no longer working after resume from ram. It not even seen by lsusb. Newly > plugged devices are no longer detected (ie. my usb camera) after resume. > > Reloading all usb + ohci/ehci modules doesn't fix the problem. I need to reboot entire > machine (thinkpad z60m). If you disable CONFIG_USB_SUSPEND, does it work properly for you? (rest of the boot log left below for the benifit of the linux-usb-devel mailing list readers.) thanks, greg k-h > Log, lines prefixed with plus character are things new in dmesg after resume > > [ 3.615018] ata1.00: configured for UDMA/100 > [ 3.615069] scsi1 : ata_piix > [ 3.626792] Switched to high resolution mode on CPU 0 > [ 3.931519] ata2.00: ATAPI, max UDMA/33 > [ 4.095266] ata2.00: configured for UDMA/33 > [ 4.095391] scsi 0:0:0:0: Direct-Access ATA HTS541010G9SA00 MBZI PQ: 0 ANSI: 5 > [ 4.097362] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-830Sx 1.00 PQ: 0 ANSI: 5 > [ 4.098744] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) > [ 4.098801] sda: Write Protect is off > [ 4.098848] sda: Mode Sense: 00 3a 00 00 > [ 4.098857] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 4.098951] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) > [ 4.099006] sda: Write Protect is off > [ 4.099052] sda: Mode Sense: 00 3a 00 00 > [ 4.099062] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA > [ 4.099118] sda: sda1 sda2 sda3 sda4 > [ 4.142831] sd 0:0:0:0: Attached scsi disk sda > [ 4.146811] SGI XFS with ACLs, security attributes, large block numbers, no debug enabled > [ 4.146970] SGI XFS Quota Management subsystem > [ 4.201303] XFS mounting filesystem sda4 > [ 4.288302] Ending clean XFS mount for filesystem: sda4 > [ 4.288341] VFS: Mounted root (xfs filesystem) readonly. > [ 4.288391] Trying to move old root to /initrd ... okay > [ 4.343229] Freeing unused kernel memory: 172k freed > [ 7.637854] input: PC Speaker as /class/input/input1 > [ 7.735476] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 > [ 7.736402] pnp: Device 00:06 does not support disabling. > [ 7.736406] rtc_cmos: probe of 00:06 failed with error -16 > [ 7.833604] NET: Registered protocol family 23 > [ 7.851428] iTCO_vendor_support: vendor-support=0 > [ 7.857586] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) > [ 7.857652] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060) > [ 7.857682] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > [ 7.886626] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > [ 7.886630] Uniform CD-ROM driver Revision: 3.20 > [ 7.886666] sr 1:0:0:0: Attached scsi CD-ROM sr0 > [ 7.924750] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 20 > [ 7.946495] Linux agpgart interface v0.102 (c) Dave Jones > [ 7.947737] agpgart: Detected an Intel 915GM Chipset. > [ 7.964596] agpgart: AGP aperture is 256M @ 0x0 > [ 7.975818] intel_rng: FWH not detected > [ 7.997483] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > [ 7.997488] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > [ 8.158754] tg3.c:v3.73 (February 12, 2007) > [ 8.158776] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > [ 8.158788] PCI: Setting latency timer of device 0000:02:00.0 to 64 > [ 8.198346] eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:c0:9f:ed:33:cc > [ 8.198352] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] > [ 8.198355] eth0: dma_rwctrl[76180000] dma_mask[64-bit] > [ 8.233994] usbcore: registered new interface driver usbfs > [ 8.234013] usbcore: registered new interface driver hub > [ 8.234028] usbcore: registered new device driver usb > [ 8.314778] sdhci: Secure Digital Host Controller Interface driver > [ 8.314782] sdhci: Copyright(c) Pierre Ossman > [ 8.314802] sdhci: SDHCI controller found at 0000:14:00.2 [1180:0822] (rev 17) > [ 8.314824] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 21 > [ 8.315836] sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support. > [ 8.317907] mmc0: SDHCI at 0xc0001800 irq 21 DMA > [ 8.438883] pnp: Device 00:09 activated. > [ 8.438901] nsc-ircc, chip->init > [ 8.438913] nsc-ircc, Found chip at base=0x164e > [ 8.438948] nsc-ircc, driver loaded (Dag Brattli) > [ 8.490724] IrDA: Registered device irda0 > [ 8.490726] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 > [ 8.800531] USB Universal Host Controller Interface driver v3.0 > [ 8.800576] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 > [ 8.800586] PCI: Setting latency timer of device 0000:00:1d.0 to 64 > [ 8.800589] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 8.800814] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > [ 8.800843] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 > [ 8.800938] usb usb1: configuration #1 chosen from 1 choice > [ 8.800958] hub 1-0:1.0: USB hub found > [ 8.800963] hub 1-0:1.0: 2 ports detected > [ 8.904072] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22 > [ 8.904083] PCI: Setting latency timer of device 0000:00:1d.1 to 64 > [ 8.904086] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 8.904103] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > [ 8.904132] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001820 > [ 8.904202] usb usb2: configuration #1 chosen from 1 choice > [ 8.904222] hub 2-0:1.0: USB hub found > [ 8.904226] hub 2-0:1.0: 2 ports detected > [ 8.919830] ieee1394: Initialized config rom entry `ip1394' > [ 8.991284] ieee80211_crypt: registered algorithm 'NULL' > [ 9.000748] ieee80211: 802.11 data/management/control stack, git-1.1.13 > [ 9.000751] ieee80211: Copyright (C) 2004-2005 Intel Corporation > [ 9.008022] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 > [ 9.008032] PCI: Setting latency timer of device 0000:00:1d.2 to 64 > [ 9.008035] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 9.008052] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 > [ 9.008077] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001840 > [ 9.008149] usb usb3: configuration #1 chosen from 1 choice > [ 9.008169] hub 3-0:1.0: USB hub found > [ 9.008173] hub 3-0:1.0: 2 ports detected > [ 9.111947] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 > [ 9.111958] PCI: Setting latency timer of device 0000:00:1d.3 to 64 > [ 9.111962] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 9.111980] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 > [ 9.112024] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 > [ 9.112096] usb usb4: configuration #1 chosen from 1 choice > [ 9.112116] hub 4-0:1.0: USB hub found > [ 9.112120] hub 4-0:1.0: 2 ports detected > [ 9.117662] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq > [ 9.117666] ipw2200: Copyright(c) 2003-2006 Intel Corporation > [ 9.216247] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 > [ 9.216259] PCI: Setting latency timer of device 0000:00:1d.7 to 64 > [ 9.216262] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 9.216262] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 9.216282] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 > [ 9.216311] ehci_hcd 0000:00:1d.7: debug port 1 > [ 9.216316] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > [ 9.216323] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0004000 > [ 9.220219] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > [ 9.220281] usb usb5: configuration #1 chosen from 1 choice > [ 9.220302] hub 5-0:1.0: USB hub found > [ 9.220307] hub 5-0:1.0: 8 ports detected > [ 9.247800] usb 2-1: new low speed USB device using uhci_hcd and address 2 > [ 9.323904] ACPI: PCI Interrupt 0000:14:00.1[B] -> GSI 17 (level, low) -> IRQ 22 > [ 9.376775] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[c0001000-c00017ff] Max Packet=[2048] IR/IT contexts=[4/4] > [ 9.383999] Yenta: CardBus bridge found at 0000:14:00.0 [1014:056c] > [ 9.500390] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000 > [ 9.500395] serio: Synaptics pass-through port at isa0060/serio1/input0 > [ 9.512408] Yenta: ISA IRQ mask 0x04b0, PCI irq 16 > [ 9.512411] Socket status: 30000820 > [ 9.512474] pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff > [ 9.512477] pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xc00fffff > [ 9.512479] pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xdfffffff > [ 9.521394] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 18 > [ 9.521422] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection > [ 9.521489] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 > [ 9.521501] PCI: Setting latency timer of device 0000:00:1b.0 to 64 > [ 9.545169] input: SynPS/2 Synaptics TouchPad as /class/input/input2 > [ 9.762260] ipw2200: Radio Frequency Kill Switch is On: > [ 9.762262] Kill switch must be turned off for wireless networking to work. > [ 9.762451] ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels) > [ 10.207282] pccard: CardBus card inserted into slot 0 > [ 10.207433] usb 2-1: new low speed USB device using uhci_hcd and address 3 > [ 10.380406] usb 2-1: configuration #1 chosen from 1 choice > [ 10.623071] usb 3-2: new full speed USB device using uhci_hcd and address 2 > [ 10.655128] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b002020c273] > [ 10.742663] eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) > [ 10.801173] usb 3-2: configuration #1 chosen from 1 choice > [ 10.804247] input: Logitech Trackball as /class/input/input3 > [ 10.804276] usbcore: registered new interface driver usbmouse > [ 10.804279] drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver > [ 10.880672] usbcore: registered new interface driver hiddev > [ 10.880684] usbcore: registered new interface driver usbhid > [ 10.880686] drivers/usb/input/hid-core.c: v2.6:USB HID core driver > [ 11.750191] Adding 997912k swap on /dev/sda3. Priority:-1 extents:1 across:997912k > [ 13.868025] tun: Universal TUN/TAP device driver, 1.6 > [ 13.868028] tun: (C) 1999-2004 Max Krasnyansky > [ 13.912060] ibm_acpi: IBM ThinkPad ACPI Extras v0.13 > [ 13.912063] ibm_acpi: http://ibm-acpi.sf.net/ > [ 13.912065] ibm_acpi: ThinkPad EC firmware 77HT58WW-1.18 > [ 13.936339] Non-volatile memory driver v1.2 > [ 13.989054] ACPI: AC Adapter [AC] (on-line) > [ 14.016434] ACPI: Battery Slot [BAT0] (battery present) > [ 14.057622] input: Power Button (FF) as /class/input/input4 > [ 14.060804] ACPI: Power Button (FF) [PWRF] > [ 14.081651] input: Lid Switch as /class/input/input5 > [ 14.085310] ACPI: Lid Switch [LID] > [ 14.105386] input: Sleep Button (CM) as /class/input/input6 > [ 14.108656] ACPI: Sleep Button (CM) [SLPB] > [ 14.151484] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > [ 14.151489] ACPI: Processor [CPU] (supports 8 throttling states) > [ 14.167656] ACPI: Thermal Zone [THM0] (59 C) > [ 14.169182] Time: acpi_pm clocksource has been installed. > [ 14.178983] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > [ 14.179138] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) > [ 14.245566] hdaps: IBM ThinkPad Z60m detected. > [ 14.251307] hdaps: initial latch check good (0x01). > [ 15.010191] IBM TrackPoint firmware: 0x0e, buttons: 3/3 > [ 15.272912] input: TPPS/2 IBM TrackPoint as /class/input/input7 > [ 15.880641] hdaps: device successfully initialized. > [ 15.904066] input: hdaps as /class/input/input8 > [ 15.907700] hdaps: driver successfully loaded. > [ 16.007543] IrCOMM protocol (Dag Brattli) > [ 16.055084] Bluetooth: Core ver 2.11 > [ 16.057444] NET: Registered protocol family 31 > [ 16.057447] Bluetooth: HCI device and connection manager initialized > [ 16.057450] Bluetooth: HCI socket layer initialized > [ 16.061505] Bluetooth: L2CAP ver 2.8 > [ 16.061507] Bluetooth: L2CAP socket layer initialized > [ 16.084036] Bluetooth: RFCOMM socket layer initialized > [ 16.084060] Bluetooth: RFCOMM TTY layer initialized > [ 16.084062] Bluetooth: RFCOMM ver 1.8 > [ 19.492240] tg3: eth0: Link is up at 100 Mbps, full duplex. > [ 19.492243] tg3: eth0: Flow control is on for TX and on for RX. > [ 30.153806] NET: Registered protocol family 10 > [ 30.153862] lo: Disabled Privacy Extensions > [ 30.153898] ADDRCONF(NETDEV_UP): eth1: link is not ready > [ 30.153902] Mobile IPv6 > [ 75.003909] Clocksource tsc unstable (delta = -100632371 ns) > [ 100.623070] eth0: no IPv6 routers present > +[ 111.340754] ehci_hcd 0000:00:1d.7: remove, state 4 > +[ 111.340918] usb usb5: USB disconnect, address 1 > +[ 111.354576] ehci_hcd 0000:00:1d.7: USB bus 5 deregistered > +[ 111.356180] ACPI: PCI interrupt for device 0000:00:1d.7 disabled > +[ 111.359987] uhci_hcd 0000:00:1d.3: remove, state 4 > +[ 111.360122] usb usb4: USB disconnect, address 1 > +[ 111.368988] uhci_hcd 0000:00:1d.3: USB bus 4 deregistered > +[ 111.370543] ACPI: PCI interrupt for device 0000:00:1d.3 disabled > +[ 111.370668] uhci_hcd 0000:00:1d.2: remove, state 4 > +[ 111.370756] usb usb3: USB disconnect, address 1 > +[ 111.370838] usb 3-2: USB disconnect, address 2 > +[ 111.390422] uhci_hcd 0000:00:1d.2: USB bus 3 deregistered > +[ 111.391944] ACPI: PCI interrupt for device 0000:00:1d.2 disabled > +[ 111.392068] uhci_hcd 0000:00:1d.1: remove, state 1 > +[ 111.392156] usb usb2: USB disconnect, address 1 > +[ 111.392239] usb 2-1: USB disconnect, address 3 > +[ 111.414928] uhci_hcd 0000:00:1d.1: USB bus 2 deregistered > +[ 111.416404] ACPI: PCI interrupt for device 0000:00:1d.1 disabled > +[ 111.416529] uhci_hcd 0000:00:1d.0: remove, state 4 > +[ 111.416617] usb usb1: USB disconnect, address 1 > +[ 111.425941] uhci_hcd 0000:00:1d.0: USB bus 1 deregistered > +[ 111.427400] ACPI: PCI interrupt for device 0000:00:1d.0 disabled > +[ 113.789994] Stopping tasks ... done. > +[ 113.822883] Suspending console(s) > +[ 113.989033] pnp: Device 00:09 disabled. > +[ 113.989043] eth1: Going into suspend... > +[ 113.989103] ACPI: PCI interrupt for device 0000:14:02.0 disabled > +[ 113.990333] ACPI: PCI interrupt for device 0000:14:00.2 disabled > +[ 114.171357] ACPI: PCI interrupt for device 0000:00:1b.0 disabled > +[ 0.955069] Intel machine check architecture supported. > +[ 0.955085] Intel machine check reporting enabled on CPU#0. > +[ 0.955105] Back to C! > +[ 0.510531] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 20002020, writing 2020) > +[ 0.510536] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100107, writing 100507) > +[ 0.510545] PCI: Setting latency timer of device 0000:00:01.0 to 64 > +[ 0.520881] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002) > +[ 0.520899] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 > +[ 0.520904] PCI: Setting latency timer of device 0000:00:1b.0 to 64 > +[ 0.523276] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was f0, writing 200000f0) > +[ 0.523284] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100107, writing 100507) > +[ 0.523307] PCI: Setting latency timer of device 0000:00:1c.0 to 64 > +[ 0.523325] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100107, writing 100507) > +[ 0.523348] PCI: Setting latency timer of device 0000:00:1c.1 to 64 > +[ 0.523367] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100107, writing 100507) > +[ 0.523389] PCI: Setting latency timer of device 0000:00:1c.2 to 64 > +[ 0.523408] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100107, writing 100507) > +[ 0.523430] PCI: Setting latency timer of device 0000:00:1c.3 to 64 > +[ 0.523435] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b) > +[ 0.523455] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b) > +[ 0.523474] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b) > +[ 0.523493] PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 40b) > +[ 0.523516] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b) > +[ 0.523529] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing b0004000) > +[ 0.523536] PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900000, writing 2900102) > +[ 0.523579] PCI: Setting latency timer of device 0000:00:1e.0 to 64 > +[ 0.524168] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005) > +[ 0.524183] PCI: Setting latency timer of device 0000:00:1f.2 to 64 > +[ 0.524222] ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 20 > +[ 0.524283] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 100106) > +[ 0.526230] tg3: eth0: Link is down. > +[ 0.527119] PM: Writing back config space on device 0000:02:00.0 at offset c (was fcff0000, writing 0) > +[ 2.009424] ipw2200: Radio Frequency Kill Switch is On: > +[ 2.009427] Kill switch must be turned off for wireless networking to work. > +[ 2.009463] PM: Writing back config space on device 0000:14:00.1 at offset 4 (was 0, writing c0001000) > +[ 2.009472] PM: Writing back config space on device 0000:14:00.1 at offset 3 (was 800000, writing 804000) > +[ 2.009483] PM: Writing back config space on device 0000:14:00.1 at offset 1 (was 2100000, writing 2100106) > +[ 2.062412] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[c0001000-c00017ff] Max Packet=[2048] IR/IT contexts=[4/4] > +[ 2.092856] PM: Writing back config space on device 0000:14:00.2 at offset 4 (was 0, writing c0001800) > +[ 2.092865] PM: Writing back config space on device 0000:14:00.2 at offset 3 (was 800000, writing 804000) > +[ 2.092876] PM: Writing back config space on device 0000:14:00.2 at offset 1 (was 2100000, writing 2100106) > +[ 2.092900] ACPI: PCI Interrupt 0000:14:00.2[C] -> GSI 18 (level, low) -> IRQ 21 > +[ 2.115057] eth1: Coming out of suspend... > +[ 2.117263] ACPI: PCI Interrupt 0000:14:02.0[A] -> GSI 21 (level, low) -> IRQ 18 > +[ 2.237894] ipw2200: Radio Frequency Kill Switch is On: > +[ 2.237897] Kill switch must be turned off for wireless networking to work. > +[ 2.238073] pnp: Device 00:07 does not support activation. > +[ 2.238077] pnp: Device 00:08 does not support activation. > +[ 2.239018] pnp: Device 00:09 activated. > +[ 2.411652] tg3: eth0: Link is up at 100 Mbps, full duplex. > +[ 2.411657] tg3: eth0: Flow control is on for TX and on for RX. > +[ 2.413444] ata1: soft resetting port > +[ 2.413545] ata2: soft resetting port > +[ 2.506309] ata1.00: configured for UDMA/100 > +[ 2.506315] ata1: EH complete > +[ 2.506573] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) > +[ 2.506590] sda: Write Protect is off > +[ 2.506594] sda: Mode Sense: 00 3a 00 00 > +[ 2.506617] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA > +[ 2.529428] ata2.00: configured for UDMA/33 > +[ 2.529434] ata2: EH complete > +[ 2.758683] PM: Writing back config space on device 0000:15:00.0 at offset f (was 100, writing 110) > +[ 2.758715] PM: Writing back config space on device 0000:15:00.0 at offset 4 (was 0, writing b8000000) > +[ 2.758832] hdaps: initial latch check good (0x02). > +[ 2.856420] Restarting tasks ... done. > +[ 2.915161] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23 > +[ 2.915336] PCI: Setting latency timer of device 0000:00:1d.7 to 64 > +[ 2.915343] ehci_hcd 0000:00:1d.7: EHCI Host Controller > +[ 2.916872] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 > +[ 2.917066] ehci_hcd 0000:00:1d.7: debug port 1 > +[ 2.917075] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 > +[ 2.917244] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0004000 > +[ 2.921126] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > +[ 2.921985] usb usb1: configuration #1 chosen from 1 choice > +[ 2.922288] hub 1-0:1.0: USB hub found > +[ 2.922386] hub 1-0:1.0: 8 ports detected > +[ 3.050006] USB Universal Host Controller Interface driver v3.0 > +[ 3.050553] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 > +[ 3.050667] PCI: Setting latency timer of device 0000:00:1d.0 to 64 > +[ 3.050687] uhci_hcd 0000:00:1d.0: UHCI Host Controller > +[ 3.051194] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 > +[ 3.051321] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 > +[ 3.051816] usb usb2: configuration #1 chosen from 1 choice > +[ 3.051959] hub 2-0:1.0: USB hub found > +[ 3.052052] hub 2-0:1.0: 2 ports detected > +[ 3.154817] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22 > +[ 3.154999] PCI: Setting latency timer of device 0000:00:1d.1 to 64 > +[ 3.155006] uhci_hcd 0000:00:1d.1: UHCI Host Controller > +[ 3.155195] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 > +[ 3.155317] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001820 > +[ 3.155556] usb usb3: configuration #1 chosen from 1 choice > +[ 3.155703] hub 3-0:1.0: USB hub found > +[ 3.155796] hub 3-0:1.0: 2 ports detected > +[ 3.258777] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 > +[ 3.258968] PCI: Setting latency timer of device 0000:00:1d.2 to 64 > +[ 3.258976] uhci_hcd 0000:00:1d.2: UHCI Host Controller > +[ 3.259168] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 > +[ 3.259288] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001840 > +[ 3.259524] usb usb4: configuration #1 chosen from 1 choice > +[ 3.259674] hub 4-0:1.0: USB hub found > +[ 3.259767] hub 4-0:1.0: 2 ports detected > +[ 1.386347] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 23 > +[ 1.386473] PCI: Setting latency timer of device 0000:00:1d.3 to 64 > +[ 1.386477] uhci_hcd 0000:00:1d.3: UHCI Host Controller > +[ 1.386568] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 > +[ 1.386636] uhci_hcd 0000:00:1d.3: irq 23, io base 0x00001860 > +[ 1.386752] usb usb5: configuration #1 chosen from 1 choice > +[ 1.386815] hub 5-0:1.0: USB hub found > +[ 1.386859] hub 5-0:1.0: 2 ports detected > +[ 1.670020] usb 4-2: new full speed USB device using uhci_hcd and address 2 > +[ 1.844680] usb 4-2: configuration #1 chosen from 1 choice > +[ 3.872750] ADDRCONF(NETDEV_UP): eth0: link is not ready > +[ 9.886105] tg3: eth0: Link is up at 100 Mbps, full duplex. > +[ 9.886112] tg3: eth0: Flow control is on for TX and on for RX. > +[ 9.886134] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > +[ 10.474179] ADDRCONF(NETDEV_UP): eth1: link is not ready > > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/