Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1945952AbXBVI7d (ORCPT ); Thu, 22 Feb 2007 03:59:33 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1945958AbXBVI7d (ORCPT ); Thu, 22 Feb 2007 03:59:33 -0500 Received: from free-electrons.com ([88.191.23.47]:59485 "EHLO sd-2511.dedibox.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1945952AbXBVI72 (ORCPT ); Thu, 22 Feb 2007 03:59:28 -0500 X-Greylist: delayed 1898 seconds by postgrey-1.27 at vger.kernel.org; Thu, 22 Feb 2007 03:59:25 EST From: Michael Opdenacker Organization: Free Electrons To: trivial@kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] [TRIVIAL] Fixing occurrences of "the the " Date: Thu, 22 Feb 2007 09:27:28 +0100 User-Agent: KMail/1.9.5 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200702220927.28393.michael-lists@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 56947 Lines: 1055 Hello, I found a "the the" typo in a header file, and then found out that there were many of them! Here's a patch correcting all these typos. By the way, this is also a way of making kernel sources smaller (by almost 1K). The patch can also be found on http://free-electrons.com/pub/patches/linux/2.6.20/patch-2.6.20-the-the Cheers, Michael Signed-off-by: Michael Opdenacker diff -Nurp linux-2.6.20/arch/mips/Makefile linux-2.6.20-the-the/arch/mips/Makefile --- linux-2.6.20/arch/mips/Makefile 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/arch/mips/Makefile 2007-02-22 08:13:27.000000000 +0100 @@ -92,7 +92,7 @@ cflags-y += -ffreestanding # when fed the toolchain default! # # Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of -# 2006-10-10 don't properly change the the predefined symbols if -EB / -EL +# 2006-10-10 don't properly change the predefined symbols if -EB / -EL # are used, so we kludge that here. A bug has been filed at # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413. # diff -Nurp linux-2.6.20/arch/mips/pci/fixup-sb1250.c linux-2.6.20-the-the/arch/mips/pci/fixup-sb1250.c --- linux-2.6.20/arch/mips/pci/fixup-sb1250.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/arch/mips/pci/fixup-sb1250.c 2007-02-22 08:13:13.000000000 +0100 @@ -14,7 +14,7 @@ #include /* - * Set the the BCM1250, etc. PCI host bridge's TRDY timeout + * Set the BCM1250, etc. PCI host bridge's TRDY timeout * to the finite max. */ static void __init quirk_sb1250_pci(struct pci_dev *dev) @@ -35,7 +35,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SI quirk_sb1250_ht); /* - * Set the the SP1011 HT/PCI bridge's TRDY timeout to the finite max. + * Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max. */ static void __init quirk_sp1011(struct pci_dev *dev) { diff -Nurp linux-2.6.20/arch/powerpc/platforms/cell/io-workarounds.c linux-2.6.20-the-the/arch/powerpc/platforms/cell/io-workarounds.c --- linux-2.6.20/arch/powerpc/platforms/cell/io-workarounds.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/arch/powerpc/platforms/cell/io-workarounds.c 2007-02-22 08:13:37.000000000 +0100 @@ -74,7 +74,7 @@ static void spider_io_flush(const volati /* Fast path if we have a non-0 token, it indicates which bus we * are on. * - * If the token is 0, that means either the the ioremap was done + * If the token is 0, that means either the ioremap was done * before we initialized this layer, or it's a PIO operation. We * fallback to a low path in this case. Hopefully, internal devices * which are ioremap'ed early should use in_XX/out_XX functions diff -Nurp linux-2.6.20/arch/v850/kernel/entry.S linux-2.6.20-the-the/arch/v850/kernel/entry.S --- linux-2.6.20/arch/v850/kernel/entry.S 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/arch/v850/kernel/entry.S 2007-02-22 08:14:16.000000000 +0100 @@ -523,7 +523,7 @@ END(ret_from_trap) /* This the initial entry point for a new child thread, with an appropriate - stack in place that makes it look the the child is in the middle of an + stack in place that makes it look the child is in the middle of an syscall. This function is actually `returned to' from switch_thread (copy_thread makes ret_from_fork the return address in each new thread's saved context). */ diff -Nurp linux-2.6.20/arch/x86_64/Kconfig linux-2.6.20-the-the/arch/x86_64/Kconfig --- linux-2.6.20/arch/x86_64/Kconfig 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/arch/x86_64/Kconfig 2007-02-22 08:06:58.000000000 +0100 @@ -148,7 +148,7 @@ config MPSC Optimize for Intel Pentium 4 and older Nocona/Dempsey Xeon CPUs with Intel Extended Memory 64 Technology(EM64T). For details see . - Note the the latest Xeons (Xeon 51xx and 53xx) are not based on the + Note the latest Xeons (Xeon 51xx and 53xx) are not based on the Netburst core and shouldn't use this option. You can distingush them using the cpu family field in /proc/cpuinfo. Family 15 is a older Xeon, Family 6 a newer one diff -Nurp linux-2.6.20/block/ll_rw_blk.c linux-2.6.20-the-the/block/ll_rw_blk.c --- linux-2.6.20/block/ll_rw_blk.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/block/ll_rw_blk.c 2007-02-22 08:14:26.000000000 +0100 @@ -1704,7 +1704,7 @@ EXPORT_SYMBOL(blk_stop_queue); * on a queue, such as calling the unplug function after a timeout. * A block device may call blk_sync_queue to ensure that any * such activity is cancelled, thus allowing it to release resources - * the the callbacks might use. The caller must already have made sure + * the callbacks might use. The caller must already have made sure * that its ->make_request_fn will not re-add plugging prior to calling * this function. * diff -Nurp linux-2.6.20/Documentation/ABI/removed/devfs linux-2.6.20-the-the/Documentation/ABI/removed/devfs --- linux-2.6.20/Documentation/ABI/removed/devfs 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/Documentation/ABI/removed/devfs 2007-02-22 08:06:08.000000000 +0100 @@ -6,7 +6,7 @@ Description: races, contains a naming policy within the kernel that is against the LSB, and can be replaced by using udev. The files fs/devfs/*, include/linux/devfs_fs*.h were removed, - along with the the assorted devfs function calls throughout the + along with the assorted devfs function calls throughout the kernel tree. Users: diff -Nurp linux-2.6.20/Documentation/driver-model/platform.txt linux-2.6.20-the-the/Documentation/driver-model/platform.txt --- linux-2.6.20/Documentation/driver-model/platform.txt 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/Documentation/driver-model/platform.txt 2007-02-22 08:11:01.000000000 +0100 @@ -125,7 +125,7 @@ three different ways to find such a matc usually register later during booting, or by module loading. - Registering a driver using platform_driver_probe() works just like - using platform_driver_register(), except that the the driver won't + using platform_driver_register(), except that the driver won't be probed later if another device registers. (Which is OK, since this interface is only for use with non-hotpluggable devices.) diff -Nurp linux-2.6.20/Documentation/netlabel/introduction.txt linux-2.6.20-the-the/Documentation/netlabel/introduction.txt --- linux-2.6.20/Documentation/netlabel/introduction.txt 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/Documentation/netlabel/introduction.txt 2007-02-22 08:04:44.000000000 +0100 @@ -30,7 +30,7 @@ The communication layer exists to allow from user space. The NetLabel communication layer uses a message based protocol built on top of the Generic NETLINK transport mechanism. The exact formatting of these NetLabel messages as well as the Generic NETLINK family -names can be found in the the 'net/netlabel/' directory as comments in the +names can be found in the 'net/netlabel/' directory as comments in the header files as well as in 'include/net/netlabel.h'. * Security Module API diff -Nurp linux-2.6.20/Documentation/pci.txt linux-2.6.20-the-the/Documentation/pci.txt --- linux-2.6.20/Documentation/pci.txt 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/Documentation/pci.txt 2007-02-22 08:09:30.000000000 +0100 @@ -377,7 +377,7 @@ E.g. clearing pending interrupts. 3.6 Register IRQ handler ~~~~~~~~~~~~~~~~~~~~~~~~ -While calling request_irq() is the the last step described here, +While calling request_irq() is the last step described here, this is often just another intermediate step to initialize a device. This step can often be deferred until the device is opened for use. diff -Nurp linux-2.6.20/Documentation/powerpc/booting-without-of.txt linux-2.6.20-the-the/Documentation/powerpc/booting-without-of.txt --- linux-2.6.20/Documentation/powerpc/booting-without-of.txt 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/Documentation/powerpc/booting-without-of.txt 2007-02-22 08:12:04.000000000 +0100 @@ -1462,7 +1462,7 @@ platforms are moved over to use the flat Basically, it is a bus of devices, that could act more or less as a complete entity (UCC, USB etc ). All of them should be siblings on the "root" qe node, using the common properties from there. - The description below applies to the the qe of MPC8360 and + The description below applies to the qe of MPC8360 and more nodes and properties would be extended in the future. i) Root QE device diff -Nurp linux-2.6.20/drivers/block/rd.c linux-2.6.20-the-the/drivers/block/rd.c --- linux-2.6.20/drivers/block/rd.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/block/rd.c 2007-02-22 08:09:38.000000000 +0100 @@ -151,7 +151,7 @@ static int ramdisk_commit_write(struct f } /* - * ->writepage to the the blockdev's mapping has to redirty the page so that the + * ->writepage to the blockdev's mapping has to redirty the page so that the * VM doesn't go and steal it. We return AOP_WRITEPAGE_ACTIVATE so that the VM * won't try to (pointlessly) write the page again for a while. * diff -Nurp linux-2.6.20/drivers/char/drm/drm_dma.c linux-2.6.20-the-the/drivers/char/drm/drm_dma.c --- linux-2.6.20/drivers/char/drm/drm_dma.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/char/drm/drm_dma.c 2007-02-22 08:05:50.000000000 +0100 @@ -65,7 +65,7 @@ int drm_dma_setup(drm_device_t * dev) * \param dev DRM device. * * Free all pages associated with DMA buffers, the buffers and pages lists, and - * finally the the drm_device::dma structure itself. + * finally the drm_device::dma structure itself. */ void drm_dma_takedown(drm_device_t * dev) { diff -Nurp linux-2.6.20/drivers/char/drm/drm_vm.c linux-2.6.20-the-the/drivers/char/drm/drm_vm.c --- linux-2.6.20/drivers/char/drm/drm_vm.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/char/drm/drm_vm.c 2007-02-22 08:12:18.000000000 +0100 @@ -133,7 +133,7 @@ static __inline__ struct page *drm_do_vm * \param address access address. * \return pointer to the page structure. * - * Get the the mapping, find the real physical page to map, get the page, and + * Get the mapping, find the real physical page to map, get the page, and * return it. */ static __inline__ struct page *drm_do_vm_shm_nopage(struct vm_area_struct *vma, diff -Nurp linux-2.6.20/drivers/char/drm/r300_reg.h linux-2.6.20-the-the/drivers/char/drm/r300_reg.h --- linux-2.6.20/drivers/char/drm/r300_reg.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/char/drm/r300_reg.h 2007-02-22 08:13:46.000000000 +0100 @@ -293,7 +293,7 @@ I am fairly certain that they are correc # define R300_PVS_CNTL_1_PROGRAM_START_SHIFT 0 # define R300_PVS_CNTL_1_POS_END_SHIFT 10 # define R300_PVS_CNTL_1_PROGRAM_END_SHIFT 20 -/* Addresses are relative the the vertex program parameters area. */ +/* Addresses are relative the vertex program parameters area. */ #define R300_VAP_PVS_CNTL_2 0x22D4 # define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0 # define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT 16 diff -Nurp linux-2.6.20/drivers/char/pcmcia/cm4000_cs.c linux-2.6.20-the-the/drivers/char/pcmcia/cm4000_cs.c --- linux-2.6.20/drivers/char/pcmcia/cm4000_cs.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/char/pcmcia/cm4000_cs.c 2007-02-22 08:05:27.000000000 +0100 @@ -1115,7 +1115,7 @@ static ssize_t cmm_write(struct file *fi /* * wait for atr to become valid. * note: it is important to lock this code. if we dont, the monitor - * could be run between test_bit and the the call the sleep on the + * could be run between test_bit and the call the sleep on the * atr-queue. if *then* the monitor detects atr valid, it will wake up * any process on the atr-queue, *but* since we have been interrupted, * we do not yet sleep on this queue. this would result in a missed diff -Nurp linux-2.6.20/drivers/ide/pci/siimage.c linux-2.6.20-the-the/drivers/ide/pci/siimage.c --- linux-2.6.20/drivers/ide/pci/siimage.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/ide/pci/siimage.c 2007-02-22 08:04:15.000000000 +0100 @@ -847,7 +847,7 @@ static void __devinit init_mmio_iops_sii /* * Now set up the hw. We have to do this ourselves as - * the MMIO layout isnt the same as the the standard port + * the MMIO layout isnt the same as the standard port * based I/O */ diff -Nurp linux-2.6.20/drivers/ieee1394/nodemgr.c linux-2.6.20-the-the/drivers/ieee1394/nodemgr.c --- linux-2.6.20/drivers/ieee1394/nodemgr.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/ieee1394/nodemgr.c 2007-02-22 08:02:30.000000000 +0100 @@ -1752,7 +1752,7 @@ static int nodemgr_host_thread(void *__h generation = get_hpsb_generation(host); /* If we get a reset before we are done waiting, then - * start the the waiting over again */ + * start the waiting over again */ if (generation != g) g = generation, i = 0; } diff -Nurp linux-2.6.20/drivers/isdn/hardware/eicon/divasync.h linux-2.6.20-the-the/drivers/isdn/hardware/eicon/divasync.h --- linux-2.6.20/drivers/isdn/hardware/eicon/divasync.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/isdn/hardware/eicon/divasync.h 2007-02-22 08:04:55.000000000 +0100 @@ -216,7 +216,7 @@ typedef struct #define SERIAL_HOOK_RING 0x85 #define SERIAL_HOOK_DETACH 0x8f unsigned char Flags; /* function refinements */ - /* parameters passed by the the ATTACH request */ + /* parameters passed by the ATTACH request */ SERIAL_INT_CB InterruptHandler; /* called on each interrupt */ SERIAL_DPC_CB DeferredHandler; /* called on hook state changes */ void *HandlerContext; /* context for both handlers */ diff -Nurp linux-2.6.20/drivers/isdn/hisax/hfc_usb.c linux-2.6.20-the-the/drivers/isdn/hisax/hfc_usb.c --- linux-2.6.20/drivers/isdn/hisax/hfc_usb.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/isdn/hisax/hfc_usb.c 2007-02-22 08:04:28.000000000 +0100 @@ -1219,11 +1219,11 @@ usb_init(hfcusb_data * hfc) /* aux = output, reset off */ write_usb(hfc, HFCUSB_CIRM, 0x10); - /* set USB_SIZE to match the the wMaxPacketSize for INT or BULK transfers */ + /* set USB_SIZE to match the wMaxPacketSize for INT or BULK transfers */ write_usb(hfc, HFCUSB_USB_SIZE, (hfc->packet_size / 8) | ((hfc->packet_size / 8) << 4)); - /* set USB_SIZE_I to match the the wMaxPacketSize for ISO transfers */ + /* set USB_SIZE_I to match the wMaxPacketSize for ISO transfers */ write_usb(hfc, HFCUSB_USB_SIZE_I, hfc->iso_packet_size); /* enable PCM/GCI master mode */ diff -Nurp linux-2.6.20/drivers/media/dvb/dvb-usb/dvb-usb-remote.c linux-2.6.20-the-the/drivers/media/dvb/dvb-usb/dvb-usb-remote.c --- linux-2.6.20/drivers/media/dvb/dvb-usb/dvb-usb-remote.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/media/dvb/dvb-usb/dvb-usb-remote.c 2007-02-22 08:04:06.000000000 +0100 @@ -3,7 +3,7 @@ * Copyright (C) 2004-6 Patrick Boettcher (patrick.boettcher@desy.de) * see dvb-usb-init.c for copyright information. * - * This file contains functions for initializing the the input-device and for handling remote-control-queries. + * This file contains functions for initializing the input-device and for handling remote-control-queries. */ #include "dvb-usb-common.h" #include diff -Nurp linux-2.6.20/drivers/media/dvb/frontends/tda10021.c linux-2.6.20-the-the/drivers/media/dvb/frontends/tda10021.c --- linux-2.6.20/drivers/media/dvb/frontends/tda10021.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/media/dvb/frontends/tda10021.c 2007-02-22 08:01:46.000000000 +0100 @@ -1,6 +1,6 @@ /* TDA10021 - Single Chip Cable Channel Receiver driver module - used on the the Siemens DVB-C cards + used on the Siemens DVB-C cards Copyright (C) 1999 Convergence Integrated Media GmbH Copyright (C) 2004 Markus Schulz diff -Nurp linux-2.6.20/drivers/media/dvb/frontends/tda10021.h linux-2.6.20-the-the/drivers/media/dvb/frontends/tda10021.h --- linux-2.6.20/drivers/media/dvb/frontends/tda10021.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/media/dvb/frontends/tda10021.h 2007-02-22 08:11:46.000000000 +0100 @@ -1,6 +1,6 @@ /* TDA10021 - Single Chip Cable Channel Receiver driver module - used on the the Siemens DVB-C cards + used on the Siemens DVB-C cards Copyright (C) 1999 Convergence Integrated Media GmbH Copyright (C) 2004 Markus Schulz diff -Nurp linux-2.6.20/drivers/media/dvb/frontends/ves1x93.c linux-2.6.20-the-the/drivers/media/dvb/frontends/ves1x93.c --- linux-2.6.20/drivers/media/dvb/frontends/ves1x93.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/media/dvb/frontends/ves1x93.c 2007-02-22 08:01:36.000000000 +0100 @@ -306,7 +306,7 @@ static int ves1x93_read_status(struct dv * The ves1893 sometimes returns sync values that make no sense, * because, e.g., the SIGNAL bit is 0, while some of the higher * bits are 1 (and how can there be a CARRIER w/o a SIGNAL?). - * Tests showed that the the VITERBI and SYNC bits are returned + * Tests showed that the VITERBI and SYNC bits are returned * reliably, while the SIGNAL and CARRIER bits ar sometimes wrong. * If such a case occurs, we read the value again, until we get a * valid value. diff -Nurp linux-2.6.20/drivers/media/video/em28xx/em28xx-video.c linux-2.6.20-the-the/drivers/media/video/em28xx/em28xx-video.c --- linux-2.6.20/drivers/media/video/em28xx/em28xx-video.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/media/video/em28xx/em28xx-video.c 2007-02-22 08:06:47.000000000 +0100 @@ -1729,7 +1729,7 @@ static int em28xx_usb_probe(struct usb_i endpoint = &interface->cur_altsetting->endpoint[1].desc; - /* check if the the device has the iso in endpoint at the correct place */ + /* check if the device has the iso in endpoint at the correct place */ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_ISOC) { em28xx_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n"); diff -Nurp linux-2.6.20/drivers/media/video/usbvideo/vicam.c linux-2.6.20-the-the/drivers/media/video/usbvideo/vicam.c --- linux-2.6.20/drivers/media/video/usbvideo/vicam.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/media/video/usbvideo/vicam.c 2007-02-22 08:10:17.000000000 +0100 @@ -28,7 +28,7 @@ * * Portions of this code were also copied from usbvideo.c * - * Special thanks to the the whole team at Sourceforge for help making + * Special thanks to the whole team at Sourceforge for help making * this driver become a reality. Notably: * Andy Armstrong who reverse engineered the color encoding and * Pavel Machek and Chris Cheney who worked on reverse engineering the diff -Nurp linux-2.6.20/drivers/message/fusion/mptbase.c linux-2.6.20-the-the/drivers/message/fusion/mptbase.c --- linux-2.6.20/drivers/message/fusion/mptbase.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/message/fusion/mptbase.c 2007-02-22 08:03:54.000000000 +0100 @@ -3556,7 +3556,7 @@ initChainBuffers(MPT_ADAPTER *ioc) * index = chain_idx * * Calculate the number of chain buffers needed(plus 1) per I/O - * then multiply the the maximum number of simultaneous cmds + * then multiply the maximum number of simultaneous cmds * * num_sge = num sge in request frame + last chain buffer * scale = num sge per chain buffer if no chain element diff -Nurp linux-2.6.20/drivers/mtd/maps/nettel.c linux-2.6.20-the-the/drivers/mtd/maps/nettel.c --- linux-2.6.20/drivers/mtd/maps/nettel.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/mtd/maps/nettel.c 2007-02-22 08:02:20.000000000 +0100 @@ -358,7 +358,7 @@ int __init nettel_init(void) /* Turn other PAR off so the first probe doesn't find it */ *intel1par = 0; - /* Probe for the the size of the first Intel flash */ + /* Probe for the size of the first Intel flash */ nettel_intel_map.size = maxsize; nettel_intel_map.phys = intel0addr; nettel_intel_map.virt = ioremap_nocache(intel0addr, maxsize); diff -Nurp linux-2.6.20/drivers/mtd/onenand/onenand_base.c linux-2.6.20-the-the/drivers/mtd/onenand/onenand_base.c --- linux-2.6.20/drivers/mtd/onenand/onenand_base.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/mtd/onenand/onenand_base.c 2007-02-22 08:11:10.000000000 +0100 @@ -1911,7 +1911,7 @@ static int onenand_check_maf(int manuf) * @param mtd MTD device structure * * OneNAND detection method: - * Compare the the values from command with ones from register + * Compare the values from command with ones from register */ static int onenand_probe(struct mtd_info *mtd) { diff -Nurp linux-2.6.20/drivers/net/bonding/bond_main.c linux-2.6.20-the-the/drivers/net/bonding/bond_main.c --- linux-2.6.20/drivers/net/bonding/bond_main.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/net/bonding/bond_main.c 2007-02-22 07:59:22.000000000 +0100 @@ -3440,7 +3440,7 @@ void bond_unregister_arp(struct bonding /*---------------------------- Hashing Policies -----------------------------*/ /* - * Hash for the the output device based upon layer 3 and layer 4 data. If + * Hash for the output device based upon layer 3 and layer 4 data. If * the packet is a frag or not TCP or UDP, just use layer 3 data. If it is * altogether not IP, mimic bond_xmit_hash_policy_l2() */ diff -Nurp linux-2.6.20/drivers/net/e1000/e1000_hw.c linux-2.6.20-the-the/drivers/net/e1000/e1000_hw.c --- linux-2.6.20/drivers/net/e1000/e1000_hw.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/net/e1000/e1000_hw.c 2007-02-22 08:14:39.000000000 +0100 @@ -5214,7 +5214,7 @@ e1000_is_onboard_nvm_eeprom(struct e1000 * hw - Struct containing variables accessed by shared code * * Reads the first 64 16 bit words of the EEPROM and sums the values read. - * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is + * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is * valid. *****************************************************************************/ int32_t diff -Nurp linux-2.6.20/drivers/net/eepro.c linux-2.6.20-the-the/drivers/net/eepro.c --- linux-2.6.20/drivers/net/eepro.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/net/eepro.c 2007-02-22 07:58:42.000000000 +0100 @@ -1126,7 +1126,7 @@ static void eepro_tx_timeout (struct net printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name, "network cable problem"); /* This is not a duplicate. One message for the console, - one for the the log file */ + one for the log file */ printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name, "network cable problem"); eepro_complete_selreset(ioaddr); diff -Nurp linux-2.6.20/drivers/net/ixgb/ixgb_ee.c linux-2.6.20-the-the/drivers/net/ixgb/ixgb_ee.c --- linux-2.6.20/drivers/net/ixgb/ixgb_ee.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/net/ixgb/ixgb_ee.c 2007-02-22 08:09:47.000000000 +0100 @@ -315,7 +315,7 @@ ixgb_wait_eeprom_command(struct ixgb_hw * hw - Struct containing variables accessed by shared code * * Reads the first 64 16 bit words of the EEPROM and sums the values read. - * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is + * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is * valid. * * Returns: diff -Nurp linux-2.6.20/drivers/net/meth.h linux-2.6.20-the-the/drivers/net/meth.h --- linux-2.6.20/drivers/net/meth.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/net/meth.h 2007-02-22 08:00:29.000000000 +0100 @@ -126,7 +126,7 @@ typedef struct rx_packet { /* Note: when loopback is set this bit becomes collision control. Setting this bit will */ /* cause a collision to be reported. */ - /* Bits 5 and 6 are used to determine the the Destination address filter mode */ + /* Bits 5 and 6 are used to determine the Destination address filter mode */ #define METH_ACCEPT_MY 0 /* 00: Accept PHY address only */ #define METH_ACCEPT_MCAST 0x20 /* 01: Accept physical, broadcast, and multicast filter matches only */ #define METH_ACCEPT_AMCAST 0x40 /* 10: Accept physical, broadcast, and all multicast packets */ diff -Nurp linux-2.6.20/drivers/net/tulip/interrupt.c linux-2.6.20-the-the/drivers/net/tulip/interrupt.c --- linux-2.6.20/drivers/net/tulip/interrupt.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/net/tulip/interrupt.c 2007-02-22 07:58:54.000000000 +0100 @@ -270,7 +270,7 @@ done: This would turn on IM for devices that is not contributing to backlog congestion with unnecessary latency. - We monitor the the device RX-ring and have: + We monitor the device RX-ring and have: HW Interrupt Mitigation either ON or OFF. diff -Nurp linux-2.6.20/drivers/net/tulip/winbond-840.c linux-2.6.20-the-the/drivers/net/tulip/winbond-840.c --- linux-2.6.20/drivers/net/tulip/winbond-840.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/net/tulip/winbond-840.c 2007-02-22 08:02:54.000000000 +0100 @@ -1022,7 +1022,7 @@ static int start_tx(struct sk_buff *skb, np->tx_ring[entry].length |= DescEndRing; /* Now acquire the irq spinlock. - * The difficult race is the the ordering between + * The difficult race is the ordering between * increasing np->cur_tx and setting DescOwned: * - if np->cur_tx is increased first the interrupt * handler could consider the packet as transmitted diff -Nurp linux-2.6.20/drivers/net/tulip/xircom_cb.c linux-2.6.20-the-the/drivers/net/tulip/xircom_cb.c --- linux-2.6.20/drivers/net/tulip/xircom_cb.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/net/tulip/xircom_cb.c 2007-02-22 08:14:03.000000000 +0100 @@ -1043,7 +1043,7 @@ static int enable_promisc(struct xircom_ /* -link_status() checks the the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what. +link_status() checks the links status and will return 0 for no link, 10 for 10mbit link and 100 for.. guess what. Must be called in locked state with interrupts disabled */ diff -Nurp linux-2.6.20/drivers/net/typhoon.c linux-2.6.20-the-the/drivers/net/typhoon.c --- linux-2.6.20/drivers/net/typhoon.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/net/typhoon.c 2007-02-22 07:59:53.000000000 +0100 @@ -639,7 +639,7 @@ typhoon_issue_command(struct typhoon *tp typhoon_inc_cmd_index(&ring->lastWrite, num_cmd); - /* "I feel a presence... another warrior is on the the mesa." + /* "I feel a presence... another warrior is on the mesa." */ wmb(); iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY); diff -Nurp linux-2.6.20/drivers/net/wireless/airport.c linux-2.6.20-the-the/drivers/net/wireless/airport.c --- linux-2.6.20/drivers/net/wireless/airport.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/net/wireless/airport.c 2007-02-22 08:10:50.000000000 +0100 @@ -149,7 +149,7 @@ static int airport_hard_reset(struct ori /* Vitally important. If we don't do this it seems we get an * interrupt somewhere during the power cycle, since * hw_unavailable is already set it doesn't get ACKed, we get - * into an interrupt loop and the the PMU decides to turn us + * into an interrupt loop and the PMU decides to turn us * off. */ disable_irq(dev->irq); diff -Nurp linux-2.6.20/drivers/s390/char/sclp_rw.c linux-2.6.20-the-the/drivers/s390/char/sclp_rw.c --- linux-2.6.20/drivers/s390/char/sclp_rw.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/s390/char/sclp_rw.c 2007-02-22 08:00:04.000000000 +0100 @@ -23,7 +23,7 @@ /* * The room for the SCCB (only for writing) is not equal to a pages size - * (as it is specified as the maximum size in the the SCLP documentation) + * (as it is specified as the maximum size in the SCLP documentation) * because of the additional data structure described above. */ #define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer)) diff -Nurp linux-2.6.20/drivers/s390/net/qeth_main.c linux-2.6.20-the-the/drivers/s390/net/qeth_main.c --- linux-2.6.20/drivers/s390/net/qeth_main.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/s390/net/qeth_main.c 2007-02-22 07:58:31.000000000 +0100 @@ -2773,7 +2773,7 @@ qeth_flush_buffers(struct qeth_qdio_out_ if (!atomic_read(&queue->set_pci_flags_count)){ /* * there's no outstanding PCI any more, so we - * have to request a PCI to be sure the the PCI + * have to request a PCI to be sure the PCI * will wake at some time in the future then we * can flush packed buffers that might still be * hanging around, which can happen if no diff -Nurp linux-2.6.20/drivers/s390/scsi/zfcp_qdio.c linux-2.6.20-the-the/drivers/s390/scsi/zfcp_qdio.c --- linux-2.6.20/drivers/s390/scsi/zfcp_qdio.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/s390/scsi/zfcp_qdio.c 2007-02-22 08:05:05.000000000 +0100 @@ -222,7 +222,7 @@ zfcp_qdio_handler_error_check(struct zfc * Since we have been using this adapter, it is save to assume * that it is not failed but recoverable. The card seems to * report link-up events by self-initiated queue shutdown. - * That is why we need to clear the the link-down flag + * That is why we need to clear the link-down flag * which is set again in case we have missed by a mile. */ zfcp_erp_adapter_reopen( diff -Nurp linux-2.6.20/drivers/scsi/aic7xxx/aic79xx_pci.c linux-2.6.20-the-the/drivers/scsi/aic7xxx/aic79xx_pci.c --- linux-2.6.20/drivers/scsi/aic7xxx/aic79xx_pci.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/scsi/aic7xxx/aic79xx_pci.c 2007-02-22 08:06:27.000000000 +0100 @@ -966,7 +966,7 @@ ahd_aic790X_setup(struct ahd_softc *ahd) | AHD_BUSFREEREV_BUG; ahd->bugs |= AHD_LQOOVERRUN_BUG|AHD_EARLY_REQ_BUG; - /* If the user requested the the SLOWCRC bit to be set. */ + /* If the user requested the SLOWCRC bit to be set. */ if (aic79xx_slowcrc) ahd->features |= AHD_AIC79XXB_SLOWCRC; diff -Nurp linux-2.6.20/drivers/scsi/aic94xx/Makefile linux-2.6.20-the-the/drivers/scsi/aic94xx/Makefile --- linux-2.6.20/drivers/scsi/aic94xx/Makefile 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/scsi/aic94xx/Makefile 2007-02-22 08:14:49.000000000 +0100 @@ -6,7 +6,7 @@ # # This file is licensed under GPLv2. # -# This file is part of the the aic94xx driver. +# This file is part of the aic94xx driver. # # The aic94xx driver is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as diff -Nurp linux-2.6.20/drivers/scsi/dc395x.c linux-2.6.20-the-the/drivers/scsi/dc395x.c --- linux-2.6.20/drivers/scsi/dc395x.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/scsi/dc395x.c 2007-02-22 07:56:02.000000000 +0100 @@ -541,7 +541,7 @@ static struct ParameterData __devinitdat /* - * Safe settings. If set to zero the the BIOS/default values with + * Safe settings. If set to zero the BIOS/default values with * command line overrides will be used. If set to 1 then safe and * slow settings will be used. */ @@ -617,7 +617,7 @@ static void __devinit fix_settings(void) /* * Mapping from the eeprom delay index value (index into this array) - * to the the number of actual seconds that the delay should be for. + * to the number of actual seconds that the delay should be for. */ static char __devinitdata eeprom_index_to_delay_map[] = { 1, 3, 5, 10, 16, 30, 60, 120 }; @@ -4136,7 +4136,7 @@ static void __devinit trms1040_write_all * @io_port: base I/O address * @addr: offset into SEEPROM * - * Returns the the byte read. + * Returns the byte read. **/ static u8 __devinit trms1040_get_data(unsigned long io_port, u8 addr) { diff -Nurp linux-2.6.20/drivers/scsi/scsi_lib.c linux-2.6.20-the-the/drivers/scsi/scsi_lib.c --- linux-2.6.20/drivers/scsi/scsi_lib.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/scsi/scsi_lib.c 2007-02-22 08:13:03.000000000 +0100 @@ -173,7 +173,7 @@ int scsi_queue_insert(struct scsi_cmnd * * @retries: number of times to retry request * @flags: or into request flags; * - * returns the req->errors value which is the the scsi_cmnd result + * returns the req->errors value which is the scsi_cmnd result * field. **/ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, diff -Nurp linux-2.6.20/drivers/usb/host/hc_crisv10.h linux-2.6.20-the-the/drivers/usb/host/hc_crisv10.h --- linux-2.6.20/drivers/usb/host/hc_crisv10.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/usb/host/hc_crisv10.h 2007-02-22 08:15:00.000000000 +0100 @@ -93,7 +93,7 @@ typedef struct etrax_usb_urb_priv { __u8 epid; /* The rx_data_list field is used for periodic traffic, to hold - received data for later processing in the the complete_urb functions, + received data for later processing in the complete_urb functions, where the data us copied to the urb's transfer_buffer. Basically, we use this intermediate storage because we don't know when it's safe to reuse the transfer_buffer (FIXME?). */ diff -Nurp linux-2.6.20/drivers/usb/misc/auerswald.c linux-2.6.20-the-the/drivers/usb/misc/auerswald.c --- linux-2.6.20/drivers/usb/misc/auerswald.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/usb/misc/auerswald.c 2007-02-22 08:05:40.000000000 +0100 @@ -1307,7 +1307,7 @@ static int auerswald_addservice (pauersw } -/* remove a service from the the device +/* remove a service from the device scp->id must be set! */ static void auerswald_removeservice (pauerswald_t cp, pauerscon_t scp) { diff -Nurp linux-2.6.20/drivers/usb/net/usbnet.h linux-2.6.20-the-the/drivers/usb/net/usbnet.h --- linux-2.6.20/drivers/usb/net/usbnet.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/usb/net/usbnet.h 2007-02-22 08:10:08.000000000 +0100 @@ -128,7 +128,7 @@ extern void usbnet_disconnect(struct usb /* Drivers that reuse some of the standard USB CDC infrastructure - * (notably, using multiple interfaces according to the the CDC + * (notably, using multiple interfaces according to the CDC * union descriptor) get some helper code. */ struct cdc_state { diff -Nurp linux-2.6.20/drivers/video/i810/i810_main.c linux-2.6.20-the-the/drivers/video/i810/i810_main.c --- linux-2.6.20/drivers/video/i810/i810_main.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/video/i810/i810_main.c 2007-02-22 08:15:10.000000000 +0100 @@ -1714,7 +1714,7 @@ static int __devinit i810_alloc_agp_mem( * @info: pointer to device specific info structure * * DESCRIPTION: - * Sets the the user monitor's horizontal and vertical + * Sets the user monitor's horizontal and vertical * frequency limits */ static void __devinit i810_init_monspecs(struct fb_info *info) diff -Nurp linux-2.6.20/drivers/video/skeletonfb.c linux-2.6.20-the-the/drivers/video/skeletonfb.c --- linux-2.6.20/drivers/video/skeletonfb.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/drivers/video/skeletonfb.c 2007-02-22 08:15:19.000000000 +0100 @@ -14,7 +14,7 @@ * of it. * * First the roles of struct fb_info and struct display have changed. Struct - * display will go away. The way the the new framebuffer console code will + * display will go away. The way the new framebuffer console code will * work is that it will act to translate data about the tty/console in * struct vc_data to data in a device independent way in struct fb_info. Then * various functions in struct fb_ops will be called to store the device diff -Nurp linux-2.6.20/fs/ext2/ext2.h linux-2.6.20-the-the/fs/ext2/ext2.h --- linux-2.6.20/fs/ext2/ext2.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/fs/ext2/ext2.h 2007-02-22 07:59:03.000000000 +0100 @@ -42,7 +42,7 @@ struct ext2_inode_info { /* * i_next_alloc_goal is the *physical* companion to i_next_alloc_block. - * it the the physical block number of the block which was most-recently + * it the physical block number of the block which was most-recently * allocated to this file. This give us the goal (target) for the next * allocation when we detect linearly ascending requests. */ diff -Nurp linux-2.6.20/fs/jfs/jfs_dmap.c linux-2.6.20-the-the/fs/jfs/jfs_dmap.c --- linux-2.6.20/fs/jfs/jfs_dmap.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/fs/jfs/jfs_dmap.c 2007-02-22 07:58:16.000000000 +0100 @@ -1507,7 +1507,7 @@ dbAllocAG(struct bmap * bmp, int agno, s if (l2nb < budmin) { /* search the lower level dmap control pages to get - * the starting block number of the the dmap that + * the starting block number of the dmap that * contains or starts off the free space. */ if ((rc = diff -Nurp linux-2.6.20/fs/jfs/jfs_imap.c linux-2.6.20-the-the/fs/jfs/jfs_imap.c --- linux-2.6.20/fs/jfs/jfs_imap.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/fs/jfs/jfs_imap.c 2007-02-22 08:01:25.000000000 +0100 @@ -386,7 +386,7 @@ int diRead(struct inode *ip) return -EIO; } - /* locate the the disk inode requested */ + /* locate the disk inode requested */ dp = (struct dinode *) mp->data; dp += rel_inode; @@ -1407,7 +1407,7 @@ int diAlloc(struct inode *pip, bool dir, inum = pip->i_ino + 1; ino = inum & (INOSPERIAG - 1); - /* back off the the hint if it is outside of the iag */ + /* back off the hint if it is outside of the iag */ if (ino == 0) inum = pip->i_ino; diff -Nurp linux-2.6.20/fs/jfs/jfs_logmgr.c linux-2.6.20-the-the/fs/jfs/jfs_logmgr.c --- linux-2.6.20/fs/jfs/jfs_logmgr.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/fs/jfs/jfs_logmgr.c 2007-02-22 08:03:44.000000000 +0100 @@ -1961,7 +1961,7 @@ static void lbmfree(struct lbuf * bp) /* * NAME: lbmRedrive * - * FUNCTION: add a log buffer to the the log redrive list + * FUNCTION: add a log buffer to the log redrive list * * PARAMETER: * bp - log buffer diff -Nurp linux-2.6.20/fs/xfs/xfs_itable.c linux-2.6.20-the-the/fs/xfs/xfs_itable.c --- linux-2.6.20/fs/xfs/xfs_itable.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/fs/xfs/xfs_itable.c 2007-02-22 08:05:16.000000000 +0100 @@ -809,7 +809,7 @@ xfs_inumbers( xfs_buf_relse(agbp); agbp = NULL; /* - * Move up the the last inode in the current + * Move up the last inode in the current * chunk. The lookup_ge will always get * us the first inode in the next chunk. */ diff -Nurp linux-2.6.20/include/asm-arm/dma-mapping.h linux-2.6.20-the-the/include/asm-arm/dma-mapping.h --- linux-2.6.20/include/asm-arm/dma-mapping.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/include/asm-arm/dma-mapping.h 2007-02-22 08:03:07.000000000 +0100 @@ -429,7 +429,7 @@ extern void dmabounce_unregister_dev(str * * The dmabounce routines call this function whenever a dma-mapping * is requested to determine whether a given buffer needs to be bounced - * or not. The function must return 0 if the the buffer is OK for + * or not. The function must return 0 if the buffer is OK for * DMA access and 1 if the buffer needs to be bounced. * */ diff -Nurp linux-2.6.20/include/asm-powerpc/ppc-pci.h linux-2.6.20-the-the/include/asm-powerpc/ppc-pci.h --- linux-2.6.20/include/asm-powerpc/ppc-pci.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/include/asm-powerpc/ppc-pci.h 2007-02-22 08:01:55.000000000 +0100 @@ -62,7 +62,7 @@ struct pci_dev *pci_get_device_by_addr(u * eeh_slot_error_detail -- record and EEH error condition to the log * @severity: 1 if temporary, 2 if permanent failure. * - * Obtains the the EEH error details from the RTAS subsystem, + * Obtains the EEH error details from the RTAS subsystem, * and then logs these details with the RTAS error log system. */ void eeh_slot_error_detail (struct pci_dn *pdn, int severity); diff -Nurp linux-2.6.20/include/linux/ext3_fs_i.h linux-2.6.20-the-the/include/linux/ext3_fs_i.h --- linux-2.6.20/include/linux/ext3_fs_i.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/include/linux/ext3_fs_i.h 2007-02-22 07:56:58.000000000 +0100 @@ -54,7 +54,7 @@ struct ext3_block_alloc_info { /* * Was i_next_alloc_goal in ext3_inode_info * is the *physical* companion to i_next_alloc_block. - * it the the physical block number of the block which was most-recentl + * it the physical block number of the block which was most-recentl * allocated to this file. This give us the goal (target) for the next * allocation when we detect linearly ascending requests. */ diff -Nurp linux-2.6.20/include/linux/ext4_fs_i.h linux-2.6.20-the-the/include/linux/ext4_fs_i.h --- linux-2.6.20/include/linux/ext4_fs_i.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/include/linux/ext4_fs_i.h 2007-02-22 08:00:15.000000000 +0100 @@ -52,7 +52,7 @@ struct ext4_block_alloc_info { /* * Was i_next_alloc_goal in ext4_inode_info * is the *physical* companion to i_next_alloc_block. - * it the the physical block number of the block which was most-recentl + * it the physical block number of the block which was most-recentl * allocated to this file. This give us the goal (target) for the next * allocation when we detect linearly ascending requests. */ diff -Nurp linux-2.6.20/include/linux/radix-tree.h linux-2.6.20-the-the/include/linux/radix-tree.h --- linux-2.6.20/include/linux/radix-tree.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/include/linux/radix-tree.h 2007-02-22 08:01:01.000000000 +0100 @@ -87,10 +87,10 @@ do { \ * management of their lifetimes must be completely managed by API users. * * For API usage, in general, - * - any function _modifying_ the the tree or tags (inserting or deleting + * - any function _modifying_ the tree or tags (inserting or deleting * items, setting or clearing tags must exclude other modifications, and * exclude any functions reading the tree. - * - any function _reading_ the the tree or tags (looking up items or tags, + * - any function _reading_ the tree or tags (looking up items or tags, * gang lookups) must exclude modifications to the tree, but may occur * concurrently with other readers. * diff -Nurp linux-2.6.20/include/linux/security.h linux-2.6.20-the-the/include/linux/security.h --- linux-2.6.20/include/linux/security.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/include/linux/security.h 2007-02-22 08:06:37.000000000 +0100 @@ -322,7 +322,7 @@ struct request_sock; * @dir contains the inode structure of parent of the new file. * @dentry contains the dentry structure of the new file. * @mode contains the mode of the new file. - * @dev contains the the device number. + * @dev contains the device number. * Return 0 if permission is granted. * @inode_rename: * Check for permission to rename a file or directory. diff -Nurp linux-2.6.20/include/linux/usb.h linux-2.6.20-the-the/include/linux/usb.h --- linux-2.6.20/include/linux/usb.h 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/include/linux/usb.h 2007-02-22 07:52:59.000000000 +0100 @@ -125,7 +125,7 @@ enum usb_interface_condition { * Each interface may have alternate settings. The initial configuration * of a device sets altsetting 0, but the device driver can change * that setting using usb_set_interface(). Alternate settings are often - * used to control the the use of periodic endpoints, such as by having + * used to control the use of periodic endpoints, such as by having * different endpoints use different amounts of reserved USB bandwidth. * All standards-conformant USB devices that use isochronous endpoints * will use them in non-default settings. diff -Nurp linux-2.6.20/initramfs/dummy linux-2.6.20-the-the/initramfs/dummy --- linux-2.6.20/initramfs/dummy 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.20-the-the/initramfs/dummy 2007-02-06 22:16:46.000000000 +0100 @@ -0,0 +1 @@ +dummy file diff -Nurp linux-2.6.20/kernel/relay.c linux-2.6.20-the-the/kernel/relay.c --- linux-2.6.20/kernel/relay.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/kernel/relay.c 2007-02-22 07:57:21.000000000 +0100 @@ -302,7 +302,7 @@ static struct rchan_callbacks default_ch /** * wakeup_readers - wake up readers waiting on a channel - * @work: work struct that contains the the channel buffer + * @work: work struct that contains the channel buffer * * This is the work function used to defer reader waking. The * reason waking is deferred is that calling directly from write diff -Nurp linux-2.6.20/kernel/wait.c linux-2.6.20-the-the/kernel/wait.c --- linux-2.6.20/kernel/wait.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/kernel/wait.c 2007-02-22 07:59:39.000000000 +0100 @@ -61,7 +61,7 @@ EXPORT_SYMBOL(remove_wait_queue); * The spin_unlock() itself is semi-permeable and only protects * one way (it only protects stuff inside the critical region and * stops them from bleeding out - it would still allow subsequent - * loads to move into the the critical region). + * loads to move into the critical region). */ void fastcall prepare_to_wait(wait_queue_head_t *q, wait_queue_t *wait, int state) diff -Nurp linux-2.6.20/mm/mmap.c linux-2.6.20-the-the/mm/mmap.c --- linux-2.6.20/mm/mmap.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/mm/mmap.c 2007-02-22 07:55:33.000000000 +0100 @@ -1729,7 +1729,7 @@ detach_vmas_to_be_unmapped(struct mm_str /* * Split a vma into two pieces at address 'addr', a new vma is allocated - * either for the first part or the the tail. + * either for the first part or the tail. */ int split_vma(struct mm_struct * mm, struct vm_area_struct * vma, unsigned long addr, int new_below) diff -Nurp linux-2.6.20/net/decnet/af_decnet.c linux-2.6.20-the-the/net/decnet/af_decnet.c --- linux-2.6.20/net/decnet/af_decnet.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/decnet/af_decnet.c 2007-02-22 08:15:28.000000000 +0100 @@ -1836,7 +1836,7 @@ static inline int dn_queue_too_long(stru } /* - * The DECnet spec requires the the "routing layer" accepts packets which + * The DECnet spec requires the "routing layer" accepts packets which * are at least 230 bytes in size. This excludes any headers which the NSP * layer might add, so we always assume that we'll be using the maximal * length header on data packets. The variation in length is due to the diff -Nurp linux-2.6.20/net/ipv4/cipso_ipv4.c linux-2.6.20-the-the/net/ipv4/cipso_ipv4.c --- linux-2.6.20/net/ipv4/cipso_ipv4.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/ipv4/cipso_ipv4.c 2007-02-22 08:11:19.000000000 +0100 @@ -602,7 +602,7 @@ doi_walk_return: * @domain: the domain to add * * Description: - * Adds the @domain to the the DOI specified by @doi_def, this function + * Adds the @domain to the DOI specified by @doi_def, this function * should only be called by external functions (i.e. NetLabel). This function * does allocate memory. Returns zero on success, negative values on failure. * diff -Nurp linux-2.6.20/net/ipv4/ipvs/ip_vs_sed.c linux-2.6.20-the-the/net/ipv4/ipvs/ip_vs_sed.c --- linux-2.6.20/net/ipv4/ipvs/ip_vs_sed.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/ipv4/ipvs/ip_vs_sed.c 2007-02-22 08:12:51.000000000 +0100 @@ -18,7 +18,7 @@ * The SED algorithm attempts to minimize each job's expected delay until * completion. The expected delay that the job will experience is * (Ci + 1) / Ui if sent to the ith server, in which Ci is the number of - * jobs on the the ith server and Ui is the fixed service rate (weight) of + * jobs on the ith server and Ui is the fixed service rate (weight) of * the ith server. The SED algorithm adopts a greedy policy that each does * what is in its own best interest, i.e. to join the queue which would * minimize its expected delay of completion. diff -Nurp linux-2.6.20/net/ipv4/netfilter/ip_conntrack_core.c linux-2.6.20-the-the/net/ipv4/netfilter/ip_conntrack_core.c --- linux-2.6.20/net/ipv4/netfilter/ip_conntrack_core.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/ipv4/netfilter/ip_conntrack_core.c 2007-02-22 08:12:41.000000000 +0100 @@ -910,7 +910,7 @@ void ip_conntrack_unexpect_related(struc struct ip_conntrack_expect *i; write_lock_bh(&ip_conntrack_lock); - /* choose the the oldest expectation to evict */ + /* choose the oldest expectation to evict */ list_for_each_entry_reverse(i, &ip_conntrack_expect_list, list) { if (expect_matches(i, exp) && del_timer(&i->timeout)) { ip_ct_unlink_expect(i); diff -Nurp linux-2.6.20/net/ipv4/udp.c linux-2.6.20-the-the/net/ipv4/udp.c --- linux-2.6.20/net/ipv4/udp.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/ipv4/udp.c 2007-02-22 07:59:12.000000000 +0100 @@ -915,7 +915,7 @@ int udp_disconnect(struct sock *sk, int } /* return: - * 1 if the the UDP system should process it + * 1 if the UDP system should process it * 0 if we should drop this packet * -1 if it should get processed by xfrm4_rcv_encap */ diff -Nurp linux-2.6.20/net/llc/af_llc.c linux-2.6.20-the-the/net/llc/af_llc.c --- linux-2.6.20/net/llc/af_llc.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/llc/af_llc.c 2007-02-22 07:55:16.000000000 +0100 @@ -324,7 +324,7 @@ static int llc_ui_bind(struct socket *so memset(&laddr, 0, sizeof(laddr)); memset(&daddr, 0, sizeof(daddr)); /* - * FIXME: check if the the address is multicast, + * FIXME: check if the address is multicast, * only SOCK_DGRAM can do this. */ memcpy(laddr.mac, addr->sllc_mac, IFHWADDRLEN); diff -Nurp linux-2.6.20/net/netfilter/nf_conntrack_expect.c linux-2.6.20-the-the/net/netfilter/nf_conntrack_expect.c --- linux-2.6.20/net/netfilter/nf_conntrack_expect.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/netfilter/nf_conntrack_expect.c 2007-02-22 08:11:28.000000000 +0100 @@ -177,7 +177,7 @@ void nf_conntrack_unexpect_related(struc struct nf_conntrack_expect *i; write_lock_bh(&nf_conntrack_lock); - /* choose the the oldest expectation to evict */ + /* choose the oldest expectation to evict */ list_for_each_entry_reverse(i, &nf_conntrack_expect_list, list) { if (expect_matches(i, exp) && del_timer(&i->timeout)) { nf_ct_unlink_expect(i); diff -Nurp linux-2.6.20/net/rxrpc/connection.c linux-2.6.20-the-the/net/rxrpc/connection.c --- linux-2.6.20/net/rxrpc/connection.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/rxrpc/connection.c 2007-02-22 08:12:31.000000000 +0100 @@ -496,7 +496,7 @@ void rxrpc_conn_clearall(struct rxrpc_pe } spin_unlock(&peer->conn_gylock); - /* wait for the the conn graveyard to be completely cleared */ + /* wait for the conn graveyard to be completely cleared */ set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&peer->conn_gy_waitq, &myself); diff -Nurp linux-2.6.20/net/rxrpc/peer.c linux-2.6.20-the-the/net/rxrpc/peer.c --- linux-2.6.20/net/rxrpc/peer.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/rxrpc/peer.c 2007-02-22 07:57:47.000000000 +0100 @@ -343,7 +343,7 @@ void rxrpc_peer_clearall(struct rxrpc_tr } spin_unlock(&trans->peer_gylock); - /* wait for the the peer graveyard to be completely cleared */ + /* wait for the peer graveyard to be completely cleared */ set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&trans->peer_gy_waitq, &myself); diff -Nurp linux-2.6.20/net/sctp/chunk.c linux-2.6.20-the-the/net/sctp/chunk.c --- linux-2.6.20/net/sctp/chunk.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/sctp/chunk.c 2007-02-22 08:01:14.000000000 +0100 @@ -3,7 +3,7 @@ * * This file is part of the SCTP kernel reference Implementation * - * This file contains the code relating the the chunk abstraction. + * This file contains the code relating the chunk abstraction. * * The SCTP reference implementation is free software; * you can redistribute it and/or modify it under the terms of diff -Nurp linux-2.6.20/net/sctp/socket.c linux-2.6.20-the-the/net/sctp/socket.c --- linux-2.6.20/net/sctp/socket.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/sctp/socket.c 2007-02-22 07:58:06.000000000 +0100 @@ -2538,7 +2538,7 @@ static int sctp_setsockopt_rtoinfo(struc * * 7.1.2 SCTP_ASSOCINFO * - * This option is used to tune the the maximum retransmission attempts + * This option is used to tune the maximum retransmission attempts * of the association. * Returns an error if the new association retransmission value is * greater than the sum of the retransmission value of the peer. @@ -4369,7 +4369,7 @@ static int sctp_getsockopt_rtoinfo(struc * * 7.1.2 SCTP_ASSOCINFO * - * This option is used to tune the the maximum retransmission attempts + * This option is used to tune the maximum retransmission attempts * of the association. * Returns an error if the new association retransmission value is * greater than the sum of the retransmission value of the peer. diff -Nurp linux-2.6.20/net/sunrpc/svcauth.c linux-2.6.20-the-the/net/sunrpc/svcauth.c --- linux-2.6.20/net/sunrpc/svcauth.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/sunrpc/svcauth.c 2007-02-22 08:02:10.000000000 +0100 @@ -65,7 +65,7 @@ int svc_set_client(struct svc_rqst *rqst } /* A request, which was authenticated, has now executed. - * Time to finalise the the credentials and verifier + * Time to finalise the credentials and verifier * and release and resources */ int svc_authorise(struct svc_rqst *rqstp) diff -Nurp linux-2.6.20/net/tipc/link.c linux-2.6.20-the-the/net/tipc/link.c --- linux-2.6.20/net/tipc/link.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/net/tipc/link.c 2007-02-22 08:00:39.000000000 +0100 @@ -1128,7 +1128,7 @@ int tipc_link_send_buf(struct link *l_pt /* * tipc_link_send(): same as tipc_link_send_buf(), but the link to use has - * not been selected yet, and the the owner node is not locked + * not been selected yet, and the owner node is not locked * Called by TIPC internal users, e.g. the name distributor */ diff -Nurp linux-2.6.20/scripts/basic/docproc.c linux-2.6.20-the-the/scripts/basic/docproc.c --- linux-2.6.20/scripts/basic/docproc.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/scripts/basic/docproc.c 2007-02-22 08:03:34.000000000 +0100 @@ -211,7 +211,7 @@ void find_export_symbols(char * filename * Document all external or internal functions in a file. * Call kernel-doc with following parameters: * kernel-doc -docbook -nofunction function_name1 filename - * function names are obtained from all the the src files + * function names are obtained from all the src files * by find_export_symbols. * intfunc uses -nofunction * extfunc uses -function diff -Nurp linux-2.6.20/sound/pci/ac97/ac97_codec.c linux-2.6.20-the-the/sound/pci/ac97/ac97_codec.c --- linux-2.6.20/sound/pci/ac97/ac97_codec.c 2007-02-04 19:44:54.000000000 +0100 +++ linux-2.6.20-the-the/sound/pci/ac97/ac97_codec.c 2007-02-22 08:03:22.000000000 +0100 @@ -1075,7 +1075,7 @@ static void check_volume_resolution(stru unsigned short val; snd_ac97_write(ac97, reg, 0x8080 | cbit[i] | (cbit[i] << 8)); /* Do the read twice due to buffers on some ac97 codecs. - * e.g. The STAC9704 returns exactly what you wrote the the register + * e.g. The STAC9704 returns exactly what you wrote the register * if you read it immediately. This causes the detect routine to fail. */ val = snd_ac97_read(ac97, reg); -- Michael Opdenacker, Free Electrons Free Embedded Linux Training Materials on http://free-electrons.com/training (More than 1500 pages!) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/