Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752139AbXBWHg7 (ORCPT ); Fri, 23 Feb 2007 02:36:59 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1752141AbXBWHg7 (ORCPT ); Fri, 23 Feb 2007 02:36:59 -0500 Received: from port326.ds1-brh.adsl.cybercity.dk ([217.157.160.207]:24205 "EHLO mail.jaquet.dk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752139AbXBWHg5 (ORCPT ); Fri, 23 Feb 2007 02:36:57 -0500 X-Greylist: delayed 1924 seconds by postgrey-1.27 at vger.kernel.org; Fri, 23 Feb 2007 02:36:51 EST Date: Fri, 23 Feb 2007 08:04:39 +0100 From: Rasmus Andersen To: linux-kernel@vger.kernel.org Subject: raid 1 check and component device mismatches Message-ID: <20070223070439.GG7028@jaquet.dk> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="vGgW1X5XWziG23Ko" Content-Disposition: inline User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 26973 Lines: 535 --vGgW1X5XWziG23Ko Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hello, Let me first start by saying that if a better place to ask these quesions is to be found, please let me know. I have a 2.6.20 kernel running a raid 1 set with two SATA disks. Recently (on an older (gentoo-specific) kernel) I started getting entries like this after my weekly 'echo check > /sys/block/md0/md/sync_action' mdadm: RebuildFinished event detected on md device /dev/md0, component device mismatches found : 375936 I have tried 'repair' a number of times but to no avail. The disks seem OK from their smart values and I have yet to discover an actual data problem. Still, I am a bit unsettled and would like to hear opinions. I have attached dmesg and smartctl -a output from both disks, if more is needed I am happy to provide. Thanks in advance, Rasmus --vGgW1X5XWziG23Ko Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=dmesg 000 end: 000000001ffef000 type: 3 copy_e820_map() start: 000000001ffef000 size: 0000000000010000 end: 000000001ffff000 type: 2 copy_e820_map() start: 000000001ffff000 size: 0000000000001000 end: 0000000020000000 type: 4 copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffec000 (usable) BIOS-e820: 000000001ffec000 - 000000001ffef000 (ACPI data) BIOS-e820: 000000001ffef000 - 000000001ffff000 (reserved) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. Entering add_active_range(0, 0, 131052) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131052 early_node_map[1] active PFN ranges 0: 0 -> 131052 On node 0 totalpages: 131052 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 991 pages used for memmap Normal zone: 125965 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f7930 ACPI: RSDT (v001 ASUS A7A266 0x42302e31 MSFT 0x31313031) @ 0x1ffec000 ACPI: FADT (v001 ASUS A7A266 0x42302e31 MSFT 0x31313031) @ 0x1ffec080 ACPI: BOOT (v001 ASUS A7A266 0x42302e31 MSFT 0x31313031) @ 0x1ffec040 ACPI: DSDT (v001 ASUS A7A266 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0xe408 Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000) Detected 1410.349 MHz processor. Built 1 zonelists. Total pages: 130029 Kernel command line: BOOT_IMAGE=2.6.20 ro root=902 root=/dev/ram0 lvm2root=/dev/data1/root elevator=cfq hda=none ide_setup: hda=none Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01402000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 513016k/524208k available (2387k kernel code, 10660k reserved, 938k data, 188k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb7000 - 0xfffff000 ( 288 kB) vmalloc : 0xe0800000 - 0xfffb5000 ( 503 MB) lowmem : 0xc0000000 - 0xdffec000 ( 511 MB) .init : 0xc0442000 - 0xc0471000 ( 188 kB) .data : 0xc0354fda - 0xc043f8a4 ( 938 kB) .text : 0xc0100000 - 0xc0354fda (2387 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 2822.33 BogoMIPS (lpj=5644677) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000420 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. CPU: AMD Athlon(TM) XP1600+ stepping 02 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ACPI: setting ELCR to 0200 (from 1e60) NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf1170, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region e400-e43f claimed by ali7101 ACPI PCI quirk: region e800-e81f claimed by ali7101 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices SCSI subsystem initialized libata version 2.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved pnp: 00:02: ioport range 0xe800-0xe81f has been reserved pnp: 00:02: ioport range 0x40b-0x40b has been reserved pnp: 00:02: ioport range 0x480-0x48f has been reserved pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: e6000000-e7dfffff PREFETCH window: e7f00000-efffffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 2436k freed Simple Boot Flag at 0x3a set to 0x1 Machine check exception polling timer started. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. Activating ISA DMA hang workarounds. input: Power Button (FF) as /class/input/input0 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input1 ACPI: Power Button (CM) [PWRB] ACPI: Invalid PBLK length [5] lp: driver loaded but no devices found Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.1.0 20060810 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). floppy0: no floppy controllers found RAMDISK driver initialized: 4 RAM disks of 8192K size 1024 blocksize loop: loaded (max 8 devices) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 PCI: setting IRQ 12 as level-triggered ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 0000:00:0a.0: 3Com PCI 3c905C Tornado at e080c000. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10 0000:00:0b.0: 3Com PCI 3c905C Tornado at e080e000. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hdb: WDC WD800BB-00CAA1, ATA DISK drive Probing IDE interface ide1... hdc: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hdb: max request size: 128KiB hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63 hdb: cache flushes not supported hdb: hdb1 hdb2 hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache Uniform CD-ROM driver Revision: 3.20 sata_sil 0000:00:09.0: version 2.0 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 ata1: SATA max UDMA/100 cmd 0xE0810080 ctl 0xE081008A bmdma 0xE0810000 irq 5 ata2: SATA max UDMA/100 cmd 0xE08100C0 ctl 0xE08100CA bmdma 0xE0810008 irq 5 scsi0 : sata_sil ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-7, max UDMA/133, 490234752 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : sata_sil ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y250M0 YAR5 PQ: 0 ANSI: 5 SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: Attached scsi disk sda scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 1:0:0:0: Attached scsi disk sdb ieee1394: raw1394: /dev/raw1394 device initialized usbmon: debugfs is not available USB Universal Host Controller Interface driver v3.0 usbcore: registered new interface driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input2 md: linear personality registered for level -1 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com device-mapper: multipath: version 1.0.5 loaded device-mapper: multipath round-robin: version 1.0.0 loaded Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC). ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ALSA device list: #0: Ensoniq AudioPCI ENS1371 at 0x9400, irq 11 oprofile: using timer interrupt. TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI: (supports S0 S1 S4 S5) md: Autodetecting RAID arrays. Time: tsc clocksource has been installed. md: invalid raid superblock magic on hdb1 md: hdb1 has invalid sb, not importing! md: invalid raid superblock magic on sdb1 md: sdb1 has invalid sb, not importing! md: autorun ... md: considering sdb2 ... md: adding sdb2 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md0: bitmap initialized from disk: read 12/12 pages, set 39 bits, status: 0 created bitmap (190 pages) for device md0 md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 188k freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not inserted. EXT3 FS on dm-6, internal journal Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (4095 buckets, 32760 max) kjournald starting. Commit interval 5 seconds EXT3 FS on hdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-4, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended Adding 489972k swap on /dev/sda2. Priority:1 extents:1 across:489972k ip_tables: (C) 2000-2006 Netfilter Core Team eth0: setting full-duplex. eth1: setting full-duplex. hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04 { AbortedCommand } ide: failed opcode was: 0xec md: requested-resync of RAID array md0 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for requested-resync. md: using 128k window, over a total of 198306240 blocks. md: md0: requested-resync done. RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:sdb2 disk 1, wo:0, o:1, dev:sda1 kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. md: requested-resync of RAID array md0 md: minimum _guaranteed_ speed: 1000 KB/sec/disk. md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for requested-resync. md: using 128k window, over a total of 198306240 blocks. possible SYN flooding on port 6998. Sending cookies. possible SYN flooding on port 6998. Sending cookies. possible SYN flooding on port 6998. Sending cookies. possible SYN flooding on port 6998. Sending cookies. possible SYN flooding on port 6998. Sending cookies. md: md0: requested-resync done. RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:sdb2 disk 1, wo:0, o:1, dev:sda1 --vGgW1X5XWziG23Ko Content-Type: application/vnd.stardivision.draw Content-Disposition: attachment; filename="smart.sda" Content-Transfer-Encoding: quoted-printable smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen= =0AHome page is http://smartmontools.sourceforge.net/=0A=0A=3D=3D=3D START = OF INFORMATION SECTION =3D=3D=3D=0AModel Family: Maxtor DiamondMax Plus= 9 family=0ADevice Model: Maxtor 6Y250M0=0ASerial Number: Y658CX1E= =0AFirmware Version: YAR51HW0=0AUser Capacity: 251,000,193,024 bytes=0AD= evice is: In smartctl database [for details use: -P show]=0AATA Vers= ion is: 7=0AATA Standard is: ATA/ATAPI-7 T13 1532D revision 0=0ALocal Ti= me is: Fri Feb 23 08:03:11 2007 CET=0ASMART support is: Available - devi= ce has SMART capability.=0ASMART support is: Enabled=0A=0A=3D=3D=3D START O= F READ SMART DATA SECTION =3D=3D=3D=0ASMART overall-health self-assessment = test result: PASSED=0A=0AGeneral SMART Values:=0AOffline data collection st= atus: (0x82) Offline data collection activity=0A was completed without= error.=0A Auto Offline Data Collection: Enabled.=0ASelf-test execution= status: ( 35) The self-test routine was interrupted=0A by the ho= st with a hard or soft reset.=0ATotal time to complete Offline =0Adata coll= ection: ( 363) seconds.=0AOffline data collection=0Acapabilities: (0= x5b) SMART execute Offline immediate.=0A Auto Offline data collection o= n/off support.=0A Suspend Offline collection upon new=0A command.= =0A Offline surface scan supported.=0A Self-test supported.=0A = No Conveyance Self-test supported.=0A Selective Self-test supported.=0A= SMART capabilities: (0x0003) Saves SMART data before entering=0A= power-saving mode.=0A Supports SMART auto save timer.=0AError logg= ing capability: (0x01) Error logging supported.=0A No General Pu= rpose Logging support.=0AShort self-test routine =0Arecommended polling tim= e: ( 2) minutes.=0AExtended self-test routine=0Arecommended polling tim= e: ( 106) minutes.=0A=0ASMART Attributes Data Structure revision number: = 16=0AVendor Specific SMART Attributes with Thresholds:=0AID# ATTRIBUTE_NAME= FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VA= LUE=0A 3 Spin_Up_Time 0x0027 191 181 063 Pre-fail Alw= ays - 9686=0A 4 Start_Stop_Count 0x0032 253 253 0= 00 Old_age Always - 38=0A 5 Reallocated_Sector_Ct 0x003= 3 253 253 063 Pre-fail Always - 2=0A 6 Read_Channel_= Margin 0x0001 253 253 100 Pre-fail Offline - 0=0A = 7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always = - 0=0A 8 Seek_Time_Performance 0x0027 250 243 187 Pre-= fail Always - 42878=0A 9 Power_On_Minutes 0x0032 235= 235 000 Old_age Always - 953h+07m=0A 10 Spin_Retry_Co= unt 0x002b 253 252 157 Pre-fail Always - 0=0A = 11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always = - 0=0A 12 Power_Cycle_Count 0x0032 253 253 000 Old_= age Always - 77=0A192 Power-Off_Retract_Count 0x0032 253 = 253 000 Old_age Always - 0=0A193 Load_Cycle_Count = 0x0032 253 253 000 Old_age Always - 0=0A194 Tempera= ture_Celsius 0x0032 253 253 000 Old_age Always - = 13=0A195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Alw= ays - 886=0A196 Reallocated_Event_Count 0x0008 253 253 00= 0 Old_age Offline - 0=0A197 Current_Pending_Sector 0x0008 = 253 253 000 Old_age Offline - 0=0A198 Offline_Uncorre= ctable 0x0008 253 253 000 Old_age Offline - 0=0A199= UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline = - 0=0A200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_ag= e Always - 0=0A201 Soft_Read_Error_Rate 0x000a 252 252= 000 Old_age Always - 8900=0A202 TA_Increase_Count = 0x000a 252 252 000 Old_age Always - 0=0A203 Run_Out= _Cancel 0x000b 252 252 180 Pre-fail Always - = 985=0A204 Shock_Count_Write_Opern 0x000a 252 252 000 Old_age Al= ways - 0=0A205 Shock_Rate_Write_Opern 0x000a 252 252 000= Old_age Always - 0=0A207 Spin_High_Current 0x002a = 253 252 000 Old_age Always - 0=0A208 Spin_Buzz = 0x002a 253 252 000 Old_age Always - 0=0A209 = Offline_Seek_Performnce 0x0024 198 193 000 Old_age Offline = - 0=0A 99 Unknown_Attribute 0x0004 253 253 000 Old_age= Offline - 0=0A100 Unknown_Attribute 0x0004 253 253 = 000 Old_age Offline - 0=0A101 Unknown_Attribute 0x0= 004 253 253 000 Old_age Offline - 0=0A=0ASMART Error = Log Version: 1=0ANo Errors Logged=0A=0ASMART Self-test log structure revisi= on number 1=0ANo self-tests have been logged. [To run self-tests, use: sma= rtctl -t]=0A=0A=0ASMART Selective self-test log data structure revision num= ber 1=0A SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS=0A 1 0 = 0 Not_testing=0A 2 0 0 Not_testing=0A 3 0 = 0 Not_testing=0A 4 0 0 Not_testing=0A 5 0= 0 Not_testing=0ASelective self-test flags (0x0):=0A After scannin= g selected spans, do NOT read-scan remainder of disk.=0AIf Selective self-t= est is pending on power-up, resume after 0 minute delay.=0A=0A --vGgW1X5XWziG23Ko Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="smart.sdb" smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST3320620AS Serial Number: 9RV02TPT Firmware Version: 3.AAJ User Capacity: 320,072,933,376 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Feb 23 08:03:16 2007 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 115) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 105 099 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 6 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 20958701 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 180 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 34 187 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x0022 078 071 045 Old_age Always - 420872214 194 Temperature_Celsius 0x0022 022 040 000 Old_age Always - 22 (Lifetime Min/Max 0/21) 195 Hardware_ECC_Recovered 0x001a 070 060 000 Old_age Always - 6 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 144 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. --vGgW1X5XWziG23Ko-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/