Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:18 as permitted sender) client-ip=2620:137:e000::1:18;
Date:   Wed, 16 Mar 2022 00:03:33 +0100
From:   Pali =?utf-8?B?Um9ow6Fy?= <pali@kernel.org>
To:     Marcin Wojtas <mw@semihalf.com>
Cc:     Ulf Hansson <ulf.hansson@linaro.org>,
        Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
        "linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
        Ziji Hu <huziji@marvell.com>,
        Adrian Hunter <adrian.hunter@intel.com>,
        Grzegorz Jaszczyk <jaz@semihalf.com>,
        Tomasz Nowicki <tn@semihalf.com>,
        Kostya Porotchkin <kostap@marvell.com>,
        Alex Leibovich <alexl@marvell.com>,
        "# 4.0+" <stable@vger.kernel.org>
Subject: Re: [PATCH] mmc: sdhci-xenon: fix 1.8v regulator stabilization
Message-ID: <20220315230333.eyznbu5tuxneizbs@pali>
References: <20201211141656.24915-1-mw@semihalf.com>
 <CAPDyKFqsSO+f9iG8vccwXZXDDNHgLEg7bfUe-KfHn2C-ZnOU4A@mail.gmail.com>
 <20220314154033.4x74zscayee32rrj@pali>
 <CAPv3WKc4MFeLgnJMWx=YNT5Ta5yi6fVhb4f-Rf211FTEmkvyog@mail.gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <CAPv3WKc4MFeLgnJMWx=YNT5Ta5yi6fVhb4f-Rf211FTEmkvyog@mail.gmail.com>
User-Agent: NeoMutt/20180716
Precedence: bulk

Hello!

On Monday 14 March 2022 16:51:25 Marcin Wojtas wrote:
> Hi Pali,
> 
> 
> pon., 14 mar 2022 o 16:40 Pali Rohár <pali@kernel.org> napisał(a):
> >
> > On Monday 11 January 2021 19:06:24 Ulf Hansson wrote:
> > > On Fri, 11 Dec 2020 at 15:17, Marcin Wojtas <mw@semihalf.com> wrote:
> > > >
> > > > From: Alex Leibovich <alexl@marvell.com>
> > > >
> > > > Automatic Clock Gating is a feature used for the power
> > > > consumption optimisation. It turned out that
> > > > during early init phase it may prevent the stable voltage
> > > > switch to 1.8V - due to that on some platfroms an endless
> > > > printout in dmesg can be observed:
> > > > "mmc1: 1.8V regulator output did not became stable"
> > > > Fix the problem by disabling the ACG at very beginning
> > > > of the sdhci_init and let that be enabled later.
> > > >
> > > > Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality")
> > > > Signed-off-by: Alex Leibovich <alexl@marvell.com>
> > > > Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> > > > Cc: stable@vger.kernel.org
> > >
> > > Applied for fixes (by fixing the typos), thanks!
> >
> > Hello!
> >
> > Is not this patch address same issue which was fixed by patch which was
> > merged earlier?
> >
> > bb32e1987bc5 ("mmc: sdhci-xenon: fix annoying 1.8V regulator warning")
> > https://lore.kernel.org/linux-mmc/CAPDyKFqAsvgAjfL-c9ukFNWeGJmufQosR2Eg9SKjXMVpNitdkA@mail.gmail.com/
> >
> 
> This indeed look similar. This fix was originally developed for CN913x
> platform without the mentioned patch (I'm wondering if it would also
> suffice to fix A3k board's problem). Anyway, I don't think we have an
> issue here, as everything seems to work fine on top of mainline Linux
> with both changes.

Yea, there should be no issue. Just question is if we need _both_ fixes.

I could probably try to revert bb32e1987bc5 and check what happens on
A3k board.

> Best regards,
> Marcin
> 
> > > Kind regards
> > > Uffe
> > >
> > >
> > > > ---
> > > >  drivers/mmc/host/sdhci-xenon.c | 7 ++++++-
> > > >  1 file changed, 6 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> > > > index c67611fdaa8a..4b05f6fdefb4 100644
> > > > --- a/drivers/mmc/host/sdhci-xenon.c
> > > > +++ b/drivers/mmc/host/sdhci-xenon.c
> > > > @@ -168,7 +168,12 @@ static void xenon_reset_exit(struct sdhci_host *host,
> > > >         /* Disable tuning request and auto-retuning again */
> > > >         xenon_retune_setup(host);
> > > >
> > > > -       xenon_set_acg(host, true);
> > > > +       /*
> > > > +        * The ACG should be turned off at the early init time, in order
> > > > +        * to solve a possile issues with the 1.8V regulator stabilization.
> > > > +        * The feature is enabled in later stage.
> > > > +        */
> > > > +       xenon_set_acg(host, false);
> > > >
> > > >         xenon_set_sdclk_off_idle(host, sdhc_id, false);
> > > >
> > > > --
> > > > 2.29.0
> > > >