Received-SPF: softfail (google.com: domain of transitioning linux-kernel-owner@vger.kernel.org does not designate 23.128.96.19 as permitted sender) client-ip=23.128.96.19;
From:   Sankeerth Billakanti <quic_sbillaka@quicinc.com>
To:     <dri-devel@lists.freedesktop.org>, <linux-arm-msm@vger.kernel.org>,
        <freedreno@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>,
        <devicetree@vger.kernel.org>
CC:     Sankeerth Billakanti <quic_sbillaka@quicinc.com>,
        <robdclark@gmail.com>, <seanpaul@chromium.org>,
        <swboyd@chromium.org>, <quic_kalyant@quicinc.com>,
        <quic_abhinavk@quicinc.com>, <dianders@chromium.org>,
        <quic_khsieh@quicinc.com>, <agross@kernel.org>,
        <bjorn.andersson@linaro.org>, <robh+dt@kernel.org>,
        <krzk+dt@kernel.org>, <sean@poorly.run>, <airlied@linux.ie>,
        <daniel@ffwll.ch>, <thierry.reding@gmail.com>, <sam@ravnborg.org>,
        <dmitry.baryshkov@linaro.org>, <quic_vproddut@quicinc.com>
Subject: [PATCH v5 3/9] arm64: dts: qcom: sc7280: Enable backlight for eDP panel
Date:   Wed, 16 Mar 2022 23:05:48 +0530
Message-ID: <1647452154-16361-4-git-send-email-quic_sbillaka@quicinc.com>
In-Reply-To: <1647452154-16361-1-git-send-email-quic_sbillaka@quicinc.com>
References: <1647452154-16361-1-git-send-email-quic_sbillaka@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

Enable backlight support for eDP panel on CRD platform for sc7280.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
---

Changes in v5:
  - Separate out backlight nodes

 arch/arm64/boot/dts/qcom/sc7280-crd.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
index 2df654e..16d1a5b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -37,6 +37,15 @@
 		pinctrl-0 = <&edp_panel_power>;
 	};
 
+	edp_backlight: edp-backlight {
+		compatible = "pwm-backlight";
+
+		power-supply = <&vreg_edp_bp>;
+		pwms = <&pm8350c_pwm 3 65535>;
+
+		enable-gpios = <&pm8350c_gpios 7 GPIO_ACTIVE_HIGH>;
+	};
+
 	vreg_edp_bp: vreg-edp-bp-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vreg_edp_bp";
@@ -123,7 +132,9 @@ ap_ts_pen_1v8: &i2c13 {
 		edp_panel: edp-panel {
 			compatible = "edp-panel";
 
+			backlight = <&edp_backlight>;
 			power-supply = <&edp_3v3_regulator>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -172,6 +183,13 @@ ap_ts_pen_1v8: &i2c13 {
 	};
 };
 
+&pm8350c_pwm {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_bl_pwm>;
+};
+
 &tlmm {
 	edp_panel_power: edp-panel-power {
 		pins = "gpio80";
-- 
2.7.4